How to Replace Serpentine Belt 2003-2008 Toyota Corolla
Vložit
- čas přidán 26. 04. 2023
- Buy Now!
New Serpentine Belt from 1AAuto.com 1aau.to/ib/1AESB00033
This video shows you how to install a new serpentine belt on your 2003-2008 Toyota Corolla. The serpentine belt delivers engine power to a number of your vehicle's critical accessories, like the alternator and water pump. Over time, the rubber belt can harden or crack and begin to slip or break. It's best to replace your serpentine belt at regular intervals.
This process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla
Tools you will need:
• 10mm Socket 1aau.to/oa4i/1AXAA00017
• 19mm Socket 1aau.to/oacD/1AXAA00043
• Ratchet 1aau.to/obvo/1AXAA00016
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
I just did it on my 08 Toyota Corolla s but it wasn’t that easy 😅
Thanks for sharing your knowledge and time making this video. My wife's Corolla belt broke on the highway but we were close enough to home to get the car home. Your instructions were excellent and I was able to do it myself. Biggest problem was buying locally the belt. Auto parts store said the 4 cylinder 2008 Corolla engine takes different sized belts depending upon having air conditioning or not and the exact model 2008 Corolla. Our Corolla is the LE version. Just be sure you get the correct belt.
Thank you so much, 1A Auto, I was able to replace mine in under 10 minutes with the exact same procedure
Thanks was great help done in 2mins
Not too bad! Took me 15 min. Thanks for the video!
Great video! Replaced my serpentine belt in 10 minutes with this!
Thank you sweetie!!! You just gave me Girl Power, by doing your step by step video!!! You save me a lots of money 2!!!
THANKS FOR SHARING!!!
XXXXOOO
+@terriemartin8423 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Damn i thought you have to take the alternater off and the tension off, this seems simple enough, gonna do this next week, the control arm and lower ball joint is enough for this week
Perfect video that protect people to pay extream money for repair 👍🤙thanks guys...
Most excellent and clear video, thank you so much. My belt had already broken so unfortunately wasn't able to wait to get the high quality part you all carry. Thanks again!
Clutch man, I appreciate it
Also just did this and I wish I had smaller hands! Thanks for the info though 👍
You do great work in your videos. Thank you so much Sir
Watched video but still had to remove passenger front wheel to gain useful access to the power steering pump , harmonic balancer , and A/C pulleys. Also unbolting the power steering pump reservoir and moving it out of the way helped a lot too.
Excelent! VIDEO THANK YOU!
Great instruction, thanks
Very helpful! Got it done
Great video thank you , what about the timing belt is it as easy to change ?
Thanks awsome way to repair
Thanks, that was a great help.
Thanks for the diagram
Thank you so very much!
I got a bad ac compressor can I put the belt with no AC compressor on will it fit?
My tensioner bolt is rounded. What do I do
You know that thing you pull when you want to release the tension on the belt, I was trying to do that with mine and it completely broke off, can I use a longer belt? Or is there another solution, please tag me when you reply!
is this the same procedure for the XRS model?
I am trying to do this but it's so difficult to reach the tensioner with my tool. Any tips?
Is there any difference between this and a car with AC?
My man!
What is part number for this belt please??
I'm trying to replace my ac belt, not the serpentine, and I can not find ANY info
Thanx Dad
At 2:43 the belt doesn’t seem to sit properly on 2 pullies ( off center ) 😊
Just wanna say how much I hate small bay cars
most useful video right here