I made something for a tiny battery to use for my Garmin fish finder. The marine battery I was using was way too powerful for the small wires . Went looking for a small battery box for the little battery and seen harbor freight had those boxes and I realized I had a few laying around. Gonna be nice saving a ton of weight in my boat
I’m doing something similar. I’m going to be building a battery pack holder that connects Dewalt cell packs to a DC/DC buck converter then to a distribution panel. It should be super light and roughly the size of a shoebox. I’m working on 3D prints for the box and connectors today. I expect the entire system to cost about $100 and give me 20amp hours. The Dewalt cells charge super fast and I can always have several in reserve.
This is cool wish I had the time and resource to do this but I don’t. I would make top solar power and the inside like a portable ham radio or something like that
Great choice in box .....I have a a bright green one thats similiar . ..using a small 2 amp battery charger BY( Foval ) inside the box ... Carpet over the battery ...I like your videos
HOTSYSTEM Eagle Eye LED Light Bulbs 9W DC12V 12mm for Off-Road Car ATV Camper Trunk Motorcycle Day Time DRL License Plate Turn Signal Stop Parking Tail Reverse Fog Trunk Backup Light (White,12-pack) www.amazon.com/dp/B00MVMRS6O/ref=cm_sw_r_apan_i_T9SBC5ZDZKDMNVWPM14Y?_encoding=UTF8&psc=1
I put a sonar fish finder, marine radio and breaker switches to control the 12 volt system on my boat using this box. Harbor Freight. All my switches are on the inside. Two 12 volt batteries below deck plug into the back side where the hinges are. Hmmmm....Now Im thinking my box is a little bigger. Anyway....the box can be taken off the boat for winter. I just thought of something...........a man overboard switch.
2pcs Gold Plated Insulated Terminal Binding Post Power Amplifier Dual 2-Way Banana Plug Jack www.amazon.com/dp/B07ZJLB6QK/ref=cm_sw_r_apan_i_XNDWTHPMF665434GVZ8T
This is exactly what I've been looking for. Great no nonsense video, with a clean finished build. Would you recommend adding silicon to the cutouts in order to keep things as water tight as possible? Is there anything you would change after using it for a while?
Cllena Triple Function Dual USB Charger + Blue LED Voltmeter + 12V Outlet Socket Panel Jack Marine for Digital Devices Mobile Phone Tablet www.amazon.com/dp/B01CU5HI7U/ref=cm_sw_r_apan_i_TCDPGWVCRAGB86PF6VXS
I built one with 18650s that didn't have that big of capacity in a 2800 size box that's 7s and I think 9p it's 585Wh with a 500w inverter and a couple USB ports and a buck converter for 12ish volts in some 2.1mmX5.5mm jacks and I have started on a big one in I think the 5800 maybe it's the 4800 I don't know it does have the wheels but I got some higher capacity cells for that and it is like 1.3Kw battery but the inverters I keep getting keep blowing up but my goal was to power a 120v inverter based flux core welder which I think a good 2000w inverter should be fine I mean it only has a 15A plug but it's the space constraints and that cheap Chinese inverters lie
New to battery boxes. My question is what can these be used for and how Telford you recharge them? I like to fish and camp, so are these good for recharging cell phones? Or plugging in my ninja foodies? What about an air conditioner while camping? Any tips of exactly what these can do would be great.
I'm just a redneck that likes hunting and fishing. I use mine for my fishing graph and charging my phone with the 23ah battery I bought. It very easy to charge, simply hook up the charger to the red and black pins on top
how do you charge it? through the banana posts? Also, do you worry about charging a lifepo battery without a bms? Im working on piecing together a build like this but with a few extra charge posts (tbd) and some marine speakers. Right now the hardest thing to look for and trust are batteries.
It's sealed pretty tight minus the parts I put on. I also added foam inside to lock in the battery. It would definitely float long enough to secure if flipped.
What source do you use to buy the rocker switches, components etc? I missed what you said the quick disconnect was going to hold and what the LEDs were for.
Bought everything through Amazon as far as electronics. The quick connection is for my fishing sonar for icefishing and my kayak. The led lights are just for occasional light source when needed.
Very cool box in May. You should keep the old box and just try and find a battery. It’ll fit in the old box as well.
Great build! I love building batter boxes too
That's a nice looking set up . clean looking . well done
I made something for a tiny battery to use for my Garmin fish finder. The marine battery I was using was way too powerful for the small wires . Went looking for a small battery box for the little battery and seen harbor freight had those boxes and I realized I had a few laying around. Gonna be nice saving a ton of weight in my boat
I’m doing something similar. I’m going to be building a battery pack holder that connects Dewalt cell packs to a DC/DC buck converter then to a distribution panel. It should be super light and roughly the size of a shoebox. I’m working on 3D prints for the box and connectors today. I expect the entire system to cost about $100 and give me 20amp hours. The Dewalt cells charge super fast and I can always have several in reserve.
Nice, if you don’t mind the size and weight 19 AH AGM batteries can be had from ~$60-80
This is cool wish I had the time and resource to do this but I don’t. I would make top solar power and the inside like a portable ham radio or something like that
Just about to do this with a little Apache 1800 box battery! Was debating between then 1800 or 2800 to go with for size of battery
Great choice in box .....I have a a bright green one thats similiar . ..using a small 2 amp battery charger BY( Foval ) inside the box ... Carpet over the battery ...I like your videos
Very nice sir do you have a parts list and where you found all these items? Sure would appreciate that.
I just put the step drill bits two pack goes up to 1 3/8 in great tool for these boxes
What a great idea. Thanks for sharing.
HOTSYSTEM Eagle Eye LED Light Bulbs 9W DC12V 12mm for Off-Road Car ATV Camper Trunk Motorcycle Day Time DRL License Plate Turn Signal Stop Parking Tail Reverse Fog Trunk Backup Light (White,12-pack) www.amazon.com/dp/B00MVMRS6O/ref=cm_sw_r_apan_i_T9SBC5ZDZKDMNVWPM14Y?_encoding=UTF8&psc=1
I put a sonar fish finder, marine radio and breaker switches to control the 12 volt system on my boat using this box. Harbor Freight. All my switches are on the inside. Two 12 volt batteries below deck plug into the back side where the hinges are. Hmmmm....Now Im thinking my box is a little bigger. Anyway....the box can be taken off the boat for winter. I just thought of something...........a man overboard switch.
5Pcs On/Off Boat Rocker Switch 5Pcs 2 Pin Position Snap 12V 110V 250V QTEATAK www.amazon.com/dp/B07Y1GDRQG/ref=cm_sw_r_apan_i_7BFK2CX7340N40DS4XTX?_encoding=UTF8&psc=1
2pcs Gold Plated Insulated Terminal Binding Post Power Amplifier Dual 2-Way Banana Plug Jack www.amazon.com/dp/B07ZJLB6QK/ref=cm_sw_r_apan_i_XNDWTHPMF665434GVZ8T
6 Way Blade Fuse Box for Automotive [ATC/ATO Blade Fuses] [100 Amp][LED Indicator] [Protection Cover] [10-30V DC; 12V] Auto Marine Fuse Block www.amazon.com/dp/B00QMTAZ1W/ref=cm_sw_r_apan_i_Z76VMMG69P8CTV6T9J00?_encoding=UTF8&psc=1
This is exactly what I've been looking for. Great no nonsense video, with a clean finished build. Would you recommend adding silicon to the cutouts in order to keep things as water tight as possible? Is there anything you would change after using it for a while?
I use it in my kayak and icefishing year around and haven't had a issue..... But you couldn't go wrong by going the extra step
I'm afraid that I would be too careless with these large banana plugs during transport and that they might break.
Cllena Triple Function Dual USB Charger + Blue LED Voltmeter + 12V Outlet Socket Panel Jack Marine for Digital Devices Mobile Phone Tablet www.amazon.com/dp/B01CU5HI7U/ref=cm_sw_r_apan_i_TCDPGWVCRAGB86PF6VXS
I built one with 18650s that didn't have that big of capacity in a 2800 size box that's 7s and I think 9p it's 585Wh with a 500w inverter and a couple USB ports and a buck converter for 12ish volts in some 2.1mmX5.5mm jacks and I have started on a big one in I think the 5800 maybe it's the 4800 I don't know it does have the wheels but I got some higher capacity cells for that and it is like 1.3Kw battery but the inverters I keep getting keep blowing up but my goal was to power a 120v inverter based flux core welder which I think a good 2000w inverter should be fine I mean it only has a 15A plug but it's the space constraints and that cheap Chinese inverters lie
Looks like enough room for two of the 23ah
6:34 "100% waterproof" 🤭😆
Yeah.... I'm taking it scuba diving
New to battery boxes. My question is what can these be used for and how Telford you recharge them? I like to fish and camp, so are these good for recharging cell phones? Or plugging in my ninja foodies? What about an air conditioner while camping? Any tips of exactly what these can do would be great.
I'm just a redneck that likes hunting and fishing. I use mine for my fishing graph and charging my phone with the 23ah battery I bought. It very easy to charge, simply hook up the charger to the red and black pins on top
ELECTOP SAE Connector Extension Cable, SAE Quick Connector Disconnect Plug SAE Power Automotive Extension Cable Solar Panel Cable Wire(2 Pack) www.amazon.com/dp/B08Z86MCV5/ref=cm_sw_r_apan_i_BZRZXK1CE7JRS45NV136
What are the external battery 2 post connections called? Thanks.
@@DaddyyCrab 2pcs Gold Plated Insulated Terminal Binding Post Power Amplifier Dual 2-Way Banana Plug Jack a.co/d/b1kVTUa
@@ScottHillOutdoors Ty very much. Appreciated
Where did you get the battery connectors
Amazon
Is it safe to store a battery on its side? Serious question, not being facetious.
@silvercommander I contacted Dakota and they assured me that it's fine
@@ScottHillOutdoors oh ok. Thanks for the reply. I'm thinking of attempting to make one.
how do you charge it? through the banana posts? Also, do you worry about charging a lifepo battery without a bms? Im working on piecing together a build like this but with a few extra charge posts (tbd) and some marine speakers. Right now the hardest thing to look for and trust are batteries.
I charge through the posts. I called and talked to a Dakota Lithium tech and he said no worries on charging in the case.
does it float by any chance? I want one for running a trolling motor on my kayak. It would be nice if it didn't sink. any ideas about that?
It's sealed pretty tight minus the parts I put on. I also added foam inside to lock in the battery. It would definitely float long enough to secure if flipped.
What source do you use to buy the rocker switches, components etc? I missed what you said the quick disconnect was going to hold and what the LEDs were for.
Bought everything through Amazon as far as electronics. The quick connection is for my fishing sonar for icefishing and my kayak. The led lights are just for occasional light source when needed.
I'd like to see you guys building these boxes validate them by submerging them in a trashcan full of water. I dare you!
Why? Is it going in Oceangate 2......
@@ScottHillOutdoors LOL, it would be a proof of concept for its application. Allegedly it's a design for a Yak not a Ferry boat.
@@fishntools watch my kayak flip video..
@@ScottHillOutdoors I found one, this is what it takes...czcams.com/video/raneNnmusOI/video.html
You mentioned amount, but she didn’t say what kind of mount that is
Scotty 438 Gear-Head Track Adapter, Black a.co/d/9ML6t3P
How bout a build list bro
I'm trying to figure out how to edit the description
$42 for that box, I almost got one for the Glocks 🤓
So much shit on the outside kind of defeats the purpose of a case. IMO.
All that shit is the purpose of the Box
pelican is so much better