Installing the Gyro Brake System with U-Brake

This videos shows the installation of the Gyro Brake system on a GT BMX bike.
The Gyro brake system includes the upper and lower cables, plates, bearing, u brake, cable hanger and adjusting barrel.
Hey guys, in this video you’ll find the installation of the Gyro brake system on a GT BMX bike.
Put grease to the frame fittings and then install the U brake.
Before tightening the bolts, you need to preload the spring tension. Hold the outer fitting by using a 13mm wrench, turn it clockwise and then tighten the bolt.
Do the same thing on the other side.
Remove the stem and install the plates, bearing and upper cables.
The lower plate is already installed on the bike, so all I need is to put in the bearing unit and then the upper plate and cables.
Insert the barrel, and finally, install the lower cables and connect the U brake with the cable hanger.
Track:
Far Away by Sarah Jansen / sarahjansenmusic
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/l-far-away
Music promoted by Audio Library • Far Away - Sarah Janse...
#gyro #ubrake #bmx
Danyo Sports Channel Episode 107
CZcams: / danyosports
Reddit: / danyosports
Facebook: / danyosports
Instagram: / danyosports
Twitter: / danyosports

[@gamerxmain4157]

My Old BMX that I bought last 2017 has that kind same break but it is in Mechanical Disk Break and Eventually I sold it this year because I don't use it anymore and I think it needs a new owner who loves bike and that will take care of my old BMX Bike I'm glad I sold it so it could have a new owner and a new adventure

[@DanyoSports]

Yes, well said.

[@BerserkerNick]

It's looking good

[@DanyoSports]

Thanks.

[@Dylan.Harvey]

My gyro has the front brake cable running through the middle

[@gmc310]

You showed everything but the hardest part. The lower cable guide???

[@bigbraintime8632]

Hey bro make a detailed video on how to install gyro on a MTB 😊😊

[@DanyoSports]

Hi, it is noted.

[@iwakartiwaiwakartiwa2315]

Rotor brake 👍

[@mudra777]

I have the same tektro brakes on a 2003 gt with 2.125 tire
that same model of brakes fit 2.30-2.40 tires?

[@DanielOliveiramg2015]

Very nice! Super

[@piotrkozowski305]

Is it possible to replace individual parts in this Gyro 3 system, e.g. the cable and armor in this combined system, which goes in the rear brake from the rotor down?
Do you have to buy the whole set?

[@DanyoSports]

Yes, you get get the individual parts from a BMX store.

[@piotrkozowski305]

@@DanyoSports How do you adjust the rear brake? So that the jaws come down evenly to the rim