Locksmiths Won't Tell This Secret! How to Remove Broken Key From Lock
Vložit
- čas přidán 29. 07. 2022
- We use keys and locks in all areas of life. However, sometimes the keys can break inside the lock. In this case, many people disassemble and replace the lock. However, there are many ways to remove the key that is broken inside the lock. In this video we show you how to remove the key that is broken inside the lock. If your key is broken, you can easily remove it with the methods in this video.
- Jak na to + styl
Unlike many other You Tube programs, you go straight to the points. I like that because you don't waste other people time. I also think the ideas presented are useful and practical. Thank you very much.
Break your key off and are locked out? Good thing you carry around candles and a hair dryer in your pockets. Slammed your lock full of super glue or wax and now you cant get your non broken key into the lock or it doesn't function and have to call a locksmith, what a time and money saver. This is the kind of shit you do when you're a youtuber who wants views and has nothing but time and money to waste while pretending to be smarter than the other apes. It's like watching a chimp bang rocks together. Nothing practical or impressive.
This reads really sarcastically
Ingenious! And it’s amazing how many things you use we have in hand. Thank you!
Knew about the jigsaw blade technique,but read you can insert the jigsaw blade and twist while pulling on the blade,which gives you more friction to grab the key stub. The one using solder is brilliant! The one with what looks like a mixture of superglue and baking soda? is brilliant as well,and probably easier to do than the solder trick.
These seem to only work if a piece of the key is sticking out partially. What if the edge isn’t visible?
It would be nice if you explained the materials you are using and the methods
Right!
Sure was nice to watch a cool vlog with no ads. Tx.
Very clever stuff 😉
Awesome . Your idea helped me to take out broken key in 2 mins .
Next time I get called out to lock full of glue or a burn hole in a upvc door, I will be sure to thank you😅👍
I'm glad they don't start on 7 , had a few jobs from some of the others
I would have used a lot more fire
What an absolute bell end this guy is
Belàrà ,,
7 uh
Some very interesting approaches you came up with
I never knew how many tradesmen there were who didn't want us to know a secret until I started watching CZcams.
What about all those now unemployed plastic surgeons that are stunned by that lady's trick that makes her skin look 50 years younger?
@@Koowluh It's a conspiracy.
I can't speak to the 2020 situation. But for the 90s in construction nobody shared any kinds of secrets. The old guys did not want the new guys coming in and taking over, they barely showed the next generation how to work.
@@chaoswithin4196 By the time the 90's came there weren't many real tradesmen left in the building industry. It became mostly cowboys, subcontractors and cheap labour working for get rich quick building companies hence the rise in Gerry built homes and offices. I don't think there were many trade secrets to pass on because there weren't many tradesmen.
I got a broken key out of the door by getting my friends 5 year old to crawl through the cat door (very much broken after that) and open the door from inside, then I went to home Depot and got a new lock. But thanks for the tip anyway!
Олег Логинов, где ты живешь, что имеешь дверь с кошачим входом и пишешь по англиЦки?
@@user-gi4ph9ls6g В Техасе живу) Есть дверь такая да.
Thanks!!! On time for me!
Much needed video. Thanks for sharing knowledge.
Wow how many times have I done this! I love how simple some of these are I loved no 7 I could of done with this knowledge years ago instead of getting my lock drilled out lol
Could have.....
This guy obviously knows what he is doing! Excellent video! Very informative....👍
Yea great for a lock stuck in vice, not so great when it's in a UPVC door that you are about to turn to liquid with a heat gun 😬
@@onkouth exactly
Great for a perfectly oiled lock, that goes smooth like a clockwork.
Number 7 worked for me. Thanks for posting
Gracias por tu exposición.
Nice work. Perfect
Wow, awesome! I wish I'd known this stuff years ago when a $50K full-online UPS bypass lockout had a stuck broken key in it :) Thank you!!
Nice one fella 1st video i watched and its saved me a call out for a snapped key !
Absolutely amazing
Great video I like the glue stick solution the best.
You've got a like & a subscription from me. I'm grateful as you're the first video on my search & I wasn't disappointed. Method one worked for me.
this guys is the og mcgimick...i LOVE this channel!
Thank you for sharing this it works with the glue stick! I tried it and it worked! 😊
Muito bom parabéns
My neighbor, a lady in her eighties, had the superpower of breaking keys in the lock. She managed to do it at least once in 6 months. RIP Annemarie!
Some people believe braking a key in a house lock is a bad luck, and thet it might mean she have Ayn HaRa on the person who broke the key
👌👌👌the candle worked excellently thank you
thanks for the tips!
Usually the lock cylinder is in the door, so the problem is more difficult to solve. It's definitely easier in the workshop, just like you showed
I got a broken key out of lock just by using a small pair of pliers. Ma aged to get a good grip and it came out very easily.
Well that is what usually happens. However that can’t fill out a whole video and this failed guy needs food on his table. So here we are.
Loved everyone and new now to your channel, cant wait to see what else you have in store colin from Surrey uk
Waoo,thanks oo..this saved me tonight ..the number 7 worked for me perfectly
Interesting. I was once told this method by a locksmith, it seemed to work well.
Only the first one putting superglue anywhere near a lock is asking for trouble.
Gracias a este video pude abrir mi cerradura, estaba muy preocupada ya que mi esposo y mi niña tenían que salir uno para el trabajo y la niña para el colegio. Dios te bendiga .
Great video. A straightened paper clip with the end slightly bent under the keys teeth works also.
1
I've tried the paperclip and coping saw blade w/o success.
I've ordered an extraction kit, and if that does not work, I'll try some of these more "sticky" suggestions like the hot glue stick. Thanks for sharing the video!
me re sirvió tu video fue de mucha ayuda y pude sacar una llave que se me había roto en una puerta muchas gracias!!!
Great video!
Thank you you save my life today
Thanks .. it's work for me .
Thank you for sharing
Thank you 🙏🏽
Any tips for when the key is broken off deep into the lock and isn't flush with the face of the lock?
Push key on the other side and hit it hard facing down
@@cameItotem how would that work on a front doorknob
P
Én papir zacskóval szoktam! Felfújom közel tartom a zárhoz , majd hirtelen rácsapok egyet ! A törött kulcs ijettében kiugrik a zárból! Mindig működik!!! Tuti módszer!
Este men si es un experto.
Thank you very much!
Excellent merci!!! 😉😉😉
Excellent thoughts 👌
Thanks alot
It happened to me before and I used a magnet to attract the broken piece of key and it works perfectly.
didn't work for me. not magnetic.
Esto les conviene a casi 100% de la gente. Desde Paraguay.
Amigo ,soy cerrajero !y las llaves generalmente no se quiebran en el tope ,sino que en cualquier lugar de la paleta ,así que lo que muestras puede funcionar pero solo si la llave se corta a raz de la entrada ,y no es para nada lo que hacemos en este trabajo .
Very informative.
I would say. If a key has been broken in a lock for some time.
Say week + there be a little corrosion and a bit more resistance from the key coming out?
Try more than a day in moist climates
grrreat simple ideas👍
Thank You!!
Nice and useful!
Vkhh
Amazing!
Thank you for this
Genius tricks very smart, with the scalpel and sodium carbonate and then a drop of adhesive
Very good. Brazil
Unbelievably, this has happened to me twice. Luckily, I could call on the services of Gladys, the local brass, who sucks like a leaf blower.
Lol......brilliant!,
U must be from blighty:).
Great reply 🤣👌
I bet you're very happy with the after service too.
A brass doesn't suck, they blow!
Yeah I had a call to remove a broken key from the ignition of a Range Rover. The genius tried the crazy glue idea, all he ended up doing was buying a new $500 lock
And it was his friends truck so yeah thanks for the business lol
That ranks up there with the dopes who think you can pick an automotive lock with a paper clip.
@@davidpawson9047 I actually had someone ask if you can pick a lock with cheese whiz once! Lol
@@Greenmanvape isn't it amazing how many ways people can ruin their locks? "I thought I could make an impression of the key if I stuck wax on the keyhole, but now I can't get it out!"
@@davidpawson9047 lol
Hey will hand warmers help warm up keys in cold to prevent snapping?
merci beaucoup pour les astuces, ça marche avec la pince à épiler
Reality: It will never come out 😅
Because the lock will probably be old and full of dirt etc, the key will be stuck in there and won't come out this easily.
Hence why the key broke,
7 us the method I use on 80% of broken keys, the other methods are crap.
@@jizzmonkey9679: Agreed, most of the time I've had to deal with a broken key, there's usually another key available at the same time and the lock takes keys from both sides. Twisting the broken key back to centre and pushing it out with another key hasn't failed to work for me so far, though I'll give an honourable shoutout to the first method!
@@fetchstixRHD 1 is basically a broken key extractor, a lot easier when it isn't the correct key and not snapped on a deep cut and jammed behind the first pin.
Youre a genius. Will it work on car ignitions??
you are the best man
Muchas gracias por las ideas 🙋
The fire option isn't a good idea because every pin has a spring, and even if only one of them loose it's strength, (which will happen if it gets too hot) the lock will stop working.
The others are good. I took one out just a few days ago with tweezers and a needle
7 is the only good one
Only works on bad locks though
The glue gun stick method worked easily! Thank you.
Thank you!
Muchas gracias me funcionó el de pegamento instantáneo y bicarbonato 😊😊
MERCI DE CETTE VIDEO !
Bonne continuation!30/08/22
Straordinario 🤩
Very cool it helped me 😅
If the lock can be removed from the door the first thing to try is give the lock a sharp tap down on vise or solid object avoiding the key area and the sharp blow will very often make the key move out.
Good tips there
Siempre la ponen facil, una llave rota en el borde, metan una llave bien adentro para ver
Excelente
This almost makes me want to go and break-off a key in a lock ... almost.
Do it.
what type of tool were you using in the first removal? Did you just put crazy glue on the rope on the one where you pulled the key out with a little rope? Or was it some type of epoxy?
Imagine you break a key, but need to get in the house so you can attempt one of these.
@Repent and believe in Jesus Christ Has jesus broken his key?cant he just magic the door open🤷♂️
@Repent and believe in Jesus Christ aaah yes, the corrupt book.
How do you get the door into the vice?
MUchas gracias
Thank you fam
Now i have a solution to a problem that realistically i will never have. 💯
So you don't use keys?
Cảm ơn bạn đã chia sẻ cho mọi người !!!
Now besides carrying the key I also need to carry a soldering iron, some Bi-Carbonate of Soda, super glue, a candle, some string, a gas torch, a scalpel and lots more junk. Thanks dude.
Be sure to keep it a secret or there will be glut of out of work locksmiths claiming unemployment benefit.
Hey MacGyver carried all that so you can too.
What if the part of the key thats stuck inside is the tip end whereby its pretty deep inside the lock?
Dank u
Genius!!
Thanks so mutch
I have a hard time believing that any of the techniques involving candlewax can really work against the tumbler springs.
In most cases, the lock is built into a door, not fixed in a vise. You don’t have that space to use the tools or to heaten the lock from the side or to push from the inside, when you don’t come in.
Ya was thinking the same thing !
locks are flush with the door at what point does this video show that you have to get behind it for these methods to work?
And all your tools will be available--after you get the broken key out so you can open the door.
Exactly. All very nice when you've got a euro lock body nicely and firmly positioned in a vice.
Fantastic ♡♡♡♡♡
You have missed the easiest way!
Put a magnet on the part of the key you have left and hold the key part against the one in the lock and pull it out. I did this at age 10’, when my dad broke the key in the trunk lock on his new car. I immediately run home for a magnet. It took only seconds to get out the part, that didn’t stick out at all from the lock.
Süpersin usta.ama diskapida geregkli olan malzemeyi nerden bulacan 😁
Benimde basima gelmisti 1mmlik matkap ucuyla üst taraffan egrilemesine biraz deldim igne ile cikardim.
Ama karbonat ve japon yapistiricisi hosuma gitti
Nice idea
Personally, I'd use a broken key extractor.
Shhh. Let them stick dirt and glue in their locks. I have no issue parting a fool and their money.
@@VashTS02 can't fault your logic
Does this work on vehicle locks also?