How To Reset Motorized TV Ceiling Mount (MI-4223)
Vložit
- čas přidán 5. 09. 2024
- ------------------------------------------------------------------------------------------------------------------------
Get it here: bit.ly/2XWWmJO
------------------------------------------------------------------------------------------------------------------------
Follow us on:
Facebook: / shopmountit
Instagram: / mount_it_
------------------------------------------------------------------------------------------------------------------------
Visit our Website at: www.mount-it.com for more ergonomic solutions.
------------------------------------------------------------------------------------------------------------------------
Mount-It! Motorized Ceiling TV Wall Mount - MI-4223
How To Reset MI-4223 Motorized TV Ceiling Mount
Remember:
Make sure MI-4223 is initially unplugged.
MI-4223 must be suspended when performing a hard reset.
Otherwise reset will fail.
1. To perform a hard reset, plug MI-4223.
2. Press and hold button “1” on the remote for 10 seconds.
3. Repeat “Step 2” five times or until the red light on the sensor lights up and flashes. MI-4223 will start unfolding.
4. Once the mount has stopped running and is completely suspended, press “OK” button. MI-4223 should start folding.
5. Reset is successful once MI-4223 has returned to its folded state.
Mine is not functioning properly, just beeping 3 times at the folded position even after resets.
My light us on entire rime it us plugged up. It never flases no matter how long I hold down the 1 button
Just installed mine and I get the initial beep when I plug it in. The instructions say to press OK and it should beep again. It does not beep though when I press OK and I am unable to use the remote. Am I doing something wrong?
I bought 3 and 2 won't move down. When l press arrow down then don't come down just beep three times please help. Instructions not clear.
I reset by: "unplugging for 10 seconds then pluggiing back in then pressing "ok" for 6 seconds"
How did you get the remote to work on the one you’re using? Is there a way to pair it or something? I plugged it in and hear the initial beep and then instructions say press OK and it should beep again. Mine is not beeping though and I’m unable to use remote. Just wondering if there’s something I’m doing wrong.
@@JordanLecher8 My other 2 units reset easily if l press 1 for 10 seconds not the 3rd one thoigh just beeps 3x whatever l try to do 😓