Delboy's Garage, Emergency Puncture Repair, Motorcycle Tyre.
Vložit
- čas přidán 9. 01. 2013
- Came out to get the bike ready for work today, ran through the usual pre-ride safety checks...and found a handy nail in the back tyre....20 minutes to go before leaving...plenty of time to fix it....Enjoy.
- Auta a dopravní prostředky
Before removing the nail or screw in your tire, get all your tools ready first. The reason for this is to be able to ream out the hole and plug it before you lose all the air. It will seal and it won't take as much air to pump it back up. I carry one of those kits in my saddle bag and a small 12v compressor when I travel. Never needed it for my own use yet, but have saved others on their journey, so it has served its purpose.
I've been driving for 30 years but have just bought an MT03 (first bike)and have been doing the pre ride checks thinking they were a bit of a "wank". Came out this morning and found a nail hanging out of the tyre. Went and bought a puncture kit from local shop and watched this vid for any finer points to note. Learnt heaps mate. Big thumbs up. Will carry this kit wherever I go now plus a head-torch for the night time jobs
About to be late for work -> takes the time to make an instructional video.
That's some dedication to your viewers, sir. I'm definitely ordering my repair kit now.
+Mia Chong Hey Mia, good to hear from you. It takes no more time to switch the camera on and film it than it would to just make the repair (well, maybe a tiny bit longer lol), but the opportunities to video things like this that happen at random are few and far between, and as you can see by the hit count, it is hugely popular and has served many riders well, so it was well worth filming aye?...
Thank you for watching and taking the time to comment... all the best to you, and ride safe over there... Del.
I just bought a repair kit myself. This is the best tutorial for emergency puncture repair I've found so far. Amazing that you took the time to record it while in a hurry to get to work. Great job. Thanks!
You're most welcome my friend, it was hardly as if I could ever contrive that to make a video, so it was worth the risk being late for work, it didn't take a lot more time to grab the camera and am glad I could share it, as it's been a popular video !
Hint.... don't pull the shrapnel out to let all the air out of the wheel. Makes it difficult to ream/plug the hole with a completely flat tire. Be prepared.... before removing the shrapnel, have the reamer and plug tool with plug material pre-threadded into the tool ready at your side. When you have all that in place, pull the shrapnel, quickly insert reamer and giv'er a good Shagging. Pull out the reamer, and quickly insert plug. It's Much Easier to plug a tire at near riding poundage...
If the tire is completely flat before starting the repair, remove shrapnel (if any) and plug hole with the reamer. Inflate tire to approx 40 lbs, then carry on with the repair... 🙂👍
Yes,it is easier,but i like to coat the thickness of the tire with glue, and since the inside pressure will tend to push off the needed glue, i do it in steps; --pull nail and ream--let it empty out--apply glue to the thickness--inflate to 15 psi--plug it.
@@josepeixoto3384 why do you let all the air out after reaming?? Just take that step out.
Poundage? word of the day
@@scottyoung4583 word of the year, poundage!
Just read your advise. Thanks alot.
"an inserter for inserting the thing you insert"
Well said my friend
Great video, looks pretty easy, but without a video like that, it can be a pain in the neck!
Thanks a lot.
Cheers
Always love your videos, they're very helpful. Almost every job I've done on my bike has been guided via your videos. Quality stuff!
Thanks Rickie, thats very kind of you, and im glad we can help you out mate... good luck with any future work, and ride safe too... cheers, Del.
Had exactly the same problem this morning, so your not alone in forgetting to sweep the garage...
Thanks Del for being my first port of call when I need to refresh the old grey cells and remind myself how simple tasks should be done. Quick search on the channel and hey presto, Del does puncture repairs.
Keep up the good work, thanks. Rob
Glad it could help Robert, thanks!
Just gone out to do my sunday night checks and found a puncture! same as you my own self tapper screw off the garage floor! watched the vid and fixed it in 10 mins :) thanks for the vid.
+grant sey Good on yer mate, now you can get to work tomorrow, and like me, you could also invest in a broom to sweep the floor now and again lol lol !
Hi Del,
Thanks mate appreciate the reply. I will invest in one of those puppies, thanks for the very clear explanation on the repair of your tyre.
Ride safe,
Phil
Sir, You are a bloody genius. Thankyou. Repair kit ordered.
Thanks for taking the time to record the repair and explain so well. I have one of these kits on the bike but fortunately have never used it. Should the need arise on the side of the road one day, I'll have a much better idea of what to do!
What a fantastic video! Well made, funny and informative. *orders repair kit*
Tom Sanders Thanks Tom, gotta have a laugh aye?!
+Moonfleet41 as above keep up the good work
Well done,well said.thankyou!
Thanks for this vid! I had a kit but I’ve had it sitting in the shed, I’m going outside now to see if kit will fit under the seat now). Luckily I’ve never had a puncture on a road bike (touchwood lol). Thumbs up and stay safe
Thank you Delboy for showing us all how to fix a flat tire. You inspired me to order one of these kits for my motorcycle :-) Very helpful video
Thanks for the tutorial. It was real life, and real useful.
You're welcome mate, glad it helped you!
use tire sealant bro
Just keep riding it buddy, it will stay up till the treads worn out....never had one leak in all the years....cheers fellah.. Del
I'm just prepping for a quick weekend around Wales and want to go prepared - this answered a load of questions on how to use the kits - much appreciated.
Thank you for your demonstration!
I got a very similar repair kit for my bike and now I feel much better and I am confident that I can handle a flat tyre, too. Thanks again!
kind regards!
You're most welcome Sir, thanks for watching the videos and ride safe!
👌👍 that is one good video hopefully u got to work on time.
A Tip : Let the air leak OUT of the tire before you use the rubber glue in the puncture. That way, the escaping air won't keep the glue from seeping into the belts and rubber surrounding the puncture.
There are a lot of "How to plug a bike tire" videos on you tube, but as usual, yours is the most straightforward and informative. Good job on this one! I've been riding around for over 30 years and the only punctures I've had have been discovered in the garage. I carry a plug kit and tiny air compressor, and realized it would probably be a good thing to learn how to use it before it became absolutely necessary. After watching the video, I feel confident that a roadside puncture will not ruin my day. Thanks, Delboy!
Thanks mate, and yeah, wise words well said, it's good to practice these things before you need to do them in combat... !
Thanks for posting. Very helpful. I now carry a puncture kit with me. My garage floor is, and will stay, much cleaner because of your video.
"Snot plugs"
Never leave home without them.
Tx Del
I've plugged a bunch of tires. There is no need to worry about a tire thats been plugged. It will last until its slick
I had one flying out while doing 300km/h so feel free to do some shit repairs like this but this boy will never ever drive a repair like this ever again !!!!!!!!
Most of the manufacturers of the repair kits tell you that they're a temporary fix and to not ride at speed with them. You can do whatever you like but don't whine when the plug works it's way out having ignored their advice.
your right did silly speeds back from bol d'or back in the day in a gsxr 1000 rode it till needed changing . had sod all money back then and bigger balls
@@moekakke lol I am pretty sure most of us would not view a repair like this as ready for 300kph. These repairs are meant to get you to the tire shop at a slow 100kph or less.
@@ronbad12 sure but nobody does it they just think oh well it's fixed it wil hold...
A near perfect explanation - that I can actually understand :-)... I am now off upstairs to dig out my repair kit that I always take touring but will now also take commuting. Doh! Thanks again
You’re not a idiot, A good person yes. You took the time to teach me / us how to fix a flat tyre / tire - good advice about using latex gloves and be ready to plug the tire while the air is still in, Fantastic Video, I am more confident now than ever before .I need to buy a tyre kit next time . Thank you Sir! And all your friends 👍❤️
this blokes brilliant , a great teacher
"Inserter for inserting that thing that you insert" LMAO 😂😂😂
Kit bought! once again thanks for this, I have only been riding two years and your tips and experience are really making my biking more enjoyable and i love doing my own work rather than paying expensive service fees. Get in there!!
Got a double puncture last night and went out to the delight of a flat in the afternoon. Bought a puncture repair kit and watched your video. Not going to be ill-prepared for this crap again. Cheers for the informative video.
+CptFriggerJizz Ain't life a bitch aye buddy... glad you got it sorted...!
p.s your not an idiot for leaving bits on the garage floor.....your a regular guy :)
+Paul Merriman yup i agree to that
Side cutters work great for removing most objects that puncture a tire. They also work for removing the excess plug material.
Maybe more glue. The glue is actually as much a lubricant to ez insertion as it is a glue. The steel belts actually do a good job grabbing and holding the plug. Do not trust a plug in non-steel belted tires.
I've done a 250 miles ride to Wales and back, throwing it into those corners. It still holds! :) Thank you!
excellent thanks, i have the kit, glad to say i havent had to use it yet, a good refresher on how to use it
From my experience, I will keep a pair of nylon gloves in the tyre Punture repair kit.. When u done repair it on the road side, I don't want my dirty sticky hands touching the grips..
Pastrana Aidi especially when the grips are expensive leather wrapped.
Great piece of kit but it would not fit under my seat. My CB1000R is definitely lacking in that department, unlike my old Fireblade which had stacks of room for allsorts of stuff. Newer bikes might look great but the people who design them have forgotten about the necessities of everyday life with a bike.
True! My old cbr has space for 2 water bottles with 0,5 liters each. My friend has the newer pc37 and can barely fit a leaf under the seat.
My keys and my user manual barely fir under the seat of my BMW S1000R....I left the manual at home so I have at least some room for...whatever would fit in there idk a few bars of snickers.... :D
@@TsvetanVR ---> Install a Top Box and Panniers... 😉👍
@@Ducati_Dude I'll probably need to do that for the road trip I'm planning, but right now I'm using just a backpack. Panniers and top cases are good but I like to ride at 200ish and I've heard panniers/cases and high speed is a bad combo :D
Thank you so much for taking the time, into your work schedule,to show us , another excellent quick video..luv ya, mate... you re a god mate, ty
Thanks mate. Best video of this process I’ve seen to-date on CZcams!
The one thing you did say that I think should be a main point. Your tire loses its speed rating because you puncture it through the steel braiding. Good for a fix, but get a new tire if you want to go fast again
Good point well made, but you know how it is, most people run these to the end of the life of the tyre
I've been guilty of that before, but I was only doing city commuting thankfully. But, then I did some research into it and found out that at speed you can have tire separation. Puncture are always a bastard when you get them.
Can't you have it properly sealed from the inside at a shop later and use it like before? I've ran aggressively (inlcuding on track days) so many car tyres with proper sealed punctures without issues at all.
@@FTWORLDDGAF great point about the tires integrity at speed and torsional force when cornering. I had a small screw on my Breakout rear. In New York, shops won't pass you with a plugged tire. Better safe than sorry or better to rip it up with peace of mind then have to Mary it around until you replace it. 💀
Once you have inserted the rubber cord, and before you pull the tool out you should rotate the tool a few times so the cord wraps round its self inside the wheel forming a 'button'. The button then stops the cord from coming out after you have trimmed it away.
Thanks Delboy. Got mine after watching this video. All the best. Essex area.
I’ve got my first puncture in 9 years. I can remember watching your video and pleased to say that my puncture is now sorted.
Got there with a minute to spare...noooo stress...lol
5:50 "That's what she said" !!!!
I should have ordered a kit sooner. All ready to set off for work yesterday and then discovered a rear flat tyre and what looks like a small nail in it. Got a kit ordered and will be attempting a repair tomorrow. Thanks for the vid. 👍
Great video del .... watching your videos have saved me a right couple of quid ...top man👍👍
After watching this video I went out and swept my garage floor
why didnt you leave it in and do it after work? how dangerous is it to leave it in???
Not dangerous at all....provided it stays in there.....but if it blows out....then so can the tyre..!!!!!!
@@Davidthomasv8 that is why the proper repair is to remove the tire and patch from the inside. Plugs are ok for an emergency repair but a proper repair should be done if you intend to keep the tire.
it is very dangerous to leave it in becouse the tire will continue to leak if the tire is now under inflated your your bike will handle poorly and if it goes low enough the tire will start to rub against the rim and will chew up the tire from the inside out then you buy a new tire always repair it as soon as possible or don t ride the bike till its road worthy its your life at risk keep the rubber side down ride safe
enjoyed this vid, thanks! been carrying tire plugs on bikes, cars, and trucks, for decades and know they are worth their weight in gold. worth it not once, but multiple times.
👍 good, informative video. Never thought about this before, guess I'll be picking up a kit myself.
I fix tires temporary with screws to get home!
Done that myself in the past... wind it out a bit...drip some glue on it, and screw it back in.. gets you home aye.
Walmart will not honor a tire fixed on the roadside with these types of repairs even if you have their road hazard option ? But if you shove a nice big screw in the hole they will.
@@Moonfleet41 Interested in this method. Sounds like you're removing whatever's caused the puncture (be it nail, metal shard, whatever), then replacing it with a self-tapping screw (with a bit of glue for seal) and re-inflating with CO2 ?
I've just left my nail in. It's plugging the hole well....😃
The more you ride the more the tyre wears and the deeper the nail goes in and the more it will leak, be careful.
Yeah sure hope you dont hit a pothole in that exact spot, for the end of the nail to crack the alloy.. happy riding!
Good video, Delboy. Thanks for posting it. I'm going to look for a kit like that for my scooter. 😃👍
Delboy. Found your video when looking for puncture repair solutions for car without spare wheel (don't ask). Bought myself 2 repair kits one for the car and one for the bike. In 30 years I have never had a puncture on a bike, yep guess what, rear tyre puncture in deepest Suffolk, roadside repair done from memory, worked fantastically and got me 150 miles home the next day at reduced speed :-) So thank you very much and I have been an avid watcher of your vids ever since. Cheers
Hi Ian, thanks buddy, im stoked that you could use the trick, and how Epic do you feel, when that happens, and you just fix it and ride on...like "yeah, whatever"...lol thanks for wathcing chap... dont forget to replace those canisters you used up....get them on eBay cheap..!
Yep, it felt good. I was so lucky it happened near a rural petrol station and the guy opened up the unused garage and said do it in here, it was raining! There really are some nice people out there, usually in the country, I dropped by the garage on my way home the next day to say thanks again and the fella was more impressed than i was in how quick i fixed it. haha :-)
That was me yesterday....approaching a roundabout....with no repair kit. Hello RAC. Kit has been ordered, thanks for the 'how to' once more Del, the repair kit I used was shit and I didn't know what I was doing so I got what I deserved. Top vid.
Hi mate, whatever puncture kit you use is better than being stranded aye?? Even a self tapping screw and a tube of superglue with get you home as long as you carry the little air canisters to inflate !
I fixed a pucture on my bike today with a similar kit. Excellent stuff.
This video is a couple of years old but it is a GREAT video for quick roadside repair! Well done!! Thanks!!
Encoutered my first puncture this afternoon. Funnily enough I watched this video a while ago and thought I should get this repair kit but I never did.. It would have made my afternoon a lot better! Thanks for these valuable tips mate.
+Vedat C Sorry to hear that mate, always the same aye... now you know what to buy in the morning lol !
+Moonfleet41 had to call breakdown. The van turned up and they didnt have a repair kit either.. Sod's law eh?! Had to drive to a motorcycle shop to get one so I'm all kitted now! Thing is do I get a new tyre or if in the morning I take it to a tyre shop and fix it will that do? Turns out the tyre had another puncture repair
+Vedat C Be guided by the tyre guys mate, as some won't puncture repair anyway... good luck !
+Moonfleet41 top lad, cheers again!
This was the first Delboy video I ever watched... 8 years ago! I just commented on the latest video about doing repairs in the house... and now you guys have another new shop!!! I can’t believe it’s been 8yrs!! Great work over the last 8yrs I’ve been subscribed. Look forward to learning with you over the next 8yrs.
Pete 🇨🇦
Hi again Pete, wow, thank you so much for your long term support, we couldn't do all this without kind and generous comments like yours, we know 8yrs, where has it gone! But like you, we're looking ahead to the next 8yrs...!
Now its 10 years
Fantastic, as a new old rider you forget about all the tips and trick, good man keep them coming, cheers.
Most excellent job. The vulcanizing compound on the reamer to get it in the tire between layers is helpful. Although a temp repair, it really helps ensure safety since you cannot see if there is any damage inside the tire. You have +1 from me. Well done.
Moonfleet41 Just wanted to say thanks, fixed my puncture yesterday as today I have to go and help a friend move cos her dad can't as he's been diagnosed for a triple bypass...she only asked last night and without the knowledge I wouldnt have been able to help, cheers.
ABSOULTLY brilliant video,good on ya Del Boy ,please do more tips mate.
Thanks for the post, your channel is always helpful.
Really useful, thank you! I had 2 punctures in my Triumph tyre but luckily they were slow ones and I got it to the shop in time! Again, my fault - rubbish on the garage floor!
I will definitely buy a kit. Thanks, mate.
Thanks a lot Del, been preaching to friends about the wonders of this kits ever since! great work on the channel too, can't help to keep on coming back to look for new stuff!
Loving the bike mate, looks wicked! Thanks for the video!!
I'm one of those numbnuts that doesn't bother carrying a Puncture repair kit. After watching you and seeing how easy it is, I won't be leaving home without one from now on! Ride safe. ;-) Cheers!!
+D4rKsideBob Thats the way mate...and hope you never need it..lol
Great video. People that have never done this need a visual tutor to help them out. I do a lot of off-road riding and I'm amazed at how many blokes go out without a patch kit and pump. It's the one thing you need the most AND the knowledge of how to fix a flat. Ride on.
Thanks for your video. I carry these kits on my bikes but have never had to put in a plug. Looks easy. Cheers!.
Great video, thank you for taking the time to record this.
Back in the 1960's I rode a 200cc two stroke 65mph max. I carried a plastic bottle of repair fluid I think made by Holts. With a tube & tyre puncture on the road, remove the nail, remove the valve insert the fluid. Replace the valve pump up the tyre with hand pump held on frame of old British motorbikes. No more than 30 mph for 10 miles. Left the stuff in the tube and never had another puncture for the remaining life of the tyre which was 10 years of 10,000 miles. Same with the other tyre a couple of years later. Ride on!
Got a bigger kit for my truck which has got me out of trouble countless times, but never new they did them for bikes. I always turn the handle 180 before pulling it out. Great vid.
Thx for the great videos, I am 61 yrs old and had 3 or 4 bikes in my days, haven't ridden a bike in the last 19 years but now have a Suzuki bandit 1250 and have already learned a lot from you're videos. THX AGAIN.
Hi Peter, thank you so much for your kind feedback sir, its an honour to help out a fellow biker and share a tip or two.. ride safe my friend and have a great week.. Del.
And ironically I'm another 62 yo who hasn't ridden street in years and glad I stumbled on your fine channel today. Greetings from San Francisco.@@Moonfleet41
@@firesail6707 Firesail: Wow, welcome aboard Sir... and more importantly, welcome back to the family ! Now don't go leaving us again! Ride safe, keep in touch!
Thanks for the video. it was very useful and will come to aid of many in the need of the know-how. By-the-way, hope you got to work in time!! Cheers.
Thanks for posting the tire repair video. Will be getting a kit for unexpected situations.
I'm a new rider and after a month of riding i punctured the tyre. It was copper wire on the road. waited for a month to take it to the garage but now i can see how much time I have wasted. Thanx for this video. I'm affraid to think what would I do if I was far away from home and this would've happened. I would just sit on the side of the road and cry. Now I'm going to keep that set you've show with me :)
Cheers
Jolanta Olek Hi Jolanta, glad the video could help you ... it is important to be self sufficient and be able to get yourself out of trouble, specially if you live in rural areas...! Good luck, ride safe!
Thankyou :)
I recently bought a kit like this, so a timely lesson for me.
Just spent 5 hours getting to work, normally 45 mins, after getting a puncture on the M1. I bought one of these kits today for £25 well worth it if it works rather than waiting around for a breakdown mechanic who knows nothing about bikes. Good video mate very instructional.
Safe riding
Followed your instruction, to the letter...did my first one today...THANK YOU Delboy.
Thanks for the video. Today I have a similar situation and I was able to fix it. I'm a follower of yours videos, again thanks.
Thank you once again for a very detailed video. I just got a piece of thin sharp wood on my tire from the construction parking at work. That tire was brand new not even 1k miles on it. Good thing I did my pre check, it saved me time and money. I had to remove the wheel of my hayabusa put it in my car and pump air at the local gas station. My tire had zero psi. Once again thank you from SoCal
Gustavo Paz Thanks Gustavo, im glad the video could help you... and how cool to hear form you all the way from California... take care on the Busa sir, all the best.. Del.
Great video,great attitude. Thank you for taking time and trouble (under time/pressure (no pun intended) constraints) .I'm like your stranded friend on a Sunday.Your video and a couple others made me see the light.Looking for a kit today.Keep your garages swept and ride safe all.Old guy in Seattle.
Too right my friend, that was a lesson long learned... especially when wedling in the garage, you're always snipping off the end of the MIG wire, so clearing up is now a religious practice!
Thanks for a great video, just fixing one myself, might actually work now I've seen this.
Watched this a while ago but just to let you know you saved me replacing a £120 brand new tyre that caught a nail. As you say, 10 min job and the tyre is as good as new so far after some three weeks of heavy riding.
Cheers Del!
Am off to Italy next summer and will deffo be getting one of these kits. Thanks for the vid
Nice video, u r down to earth and straight to the point, ill be using your tips to repair my puncture.
I bought one of those kits over 15 years ago. Never had to use one and hope i never will (fingers crossed).
Thanks to you i now know how to use it if i need to.
Great advice . Thanks.
I have an old Dyson in my garage and hoover the floor after doing any work in there..
Good plan with the Dyson mate, you can never be sure you've got all the bits swept up..
I got a repair kit after watching this vid. Well worth the cash and it's got me home on more than one occasion.
Just suffered my first puncture today...great vid, very useful. Cheers.
Bad luck mate, hope you'll get it sorted!
Dell, you make it look so easy! Thanks for sharing the knowledge.
Thanks Del another one of your videos saving the day. just found a clothes peg spring in the back tyre.
Doh, thats a bummer... glad we could help..!
My kit came with piddly small 12gms canisters and it would take 4 of those to make about 25 PSI, barely enough to get you to a garage, so I had a wilf on the net & found some big fat 16gms ones selling at 9 for £10, and 4 of those should get you to a proper working pressure of at least 36PSI in a 180 rear... obviously it depends on the tyre, if you have a little CB500 with a 120 rear or pretty much any front tyre it will take less, cheers Del
watched this video quite a while ago. watched it again today, as it happened to me this morning on my ride to work. as always, your channel is my no 1 source of info. if there is anything i need to know, i search your channel first, to see if you happen to have a solution. you usually have, so many thanks for that.
Thanks very much Troy, glad the videos can help and feedback like that makes it all worthwhile... we try and cover as many jobs as we have to do on our bikes, so glad that one was of use! Ride safe my friend, Del
Nice video! I usualy fix small holes with a wood screw and a strong super glue. So my mini kit is; super glue (not the cheapest one), few different wood screws(depending of the hole size) precut so they are not longer that 2 or 3cm, and a screwdriver. If you are at home, U can use a universal or plastic-rubber silicone, but it doesn't fit in your tail when driving, an R bike. This saved me several times, miles and miles away from home. Remember this is a temproray fix but, I drove about 1000km with this before i bought a new tyre, and the speeds were below 120 km/h.
Yet another 1 of your videos that has helped me out. Cheers
Well you saved my bacon today. After a 13 hour night shift I got flat on the M40, the handy repair kit that's sat under me seat for months got me home, cheers again guys.