We Built The Worlds Fastest Shopping Kart!
Vložit
- čas přidán 22. 06. 2023
- Go to our sponsor betterhelp.com/ghp for 10% off your first month of therapy with BetterHelp and get matched with a therapist who will listen and help
This week we build test and destroy the worlds fastest shopping kart. Built from a 120HP CBR 900rr croch rocket this thing is terrifying!
Shop Grind Hard www.grindhardplumbingco.com/
contact@grindhardplumbingco.com
PO BOX 2370
Sandpoint ID
83864 - Věda a technologie
![[柴犬ASMR]曼玉Manyu&小白Bai 毛发护理Spa asmr](http://i.ytimg.com/vi/0TsXQ7z2Dh4/mqdefault.jpg)
Get your PREMIUM shirts here www.grindhardplumbingco.com
Just some welds, a few new parts in the engine, a good metal shard cleaning, yall will have that engine up and running even BETTER than it was before lickety shplit
Is this video old cuz why is there snow
You guys need to build the beast from the little rascals as well as their opponents cart as well.
😢😢
3/4 cylinders its still good , its still good
Will's attitude is so infectious and an inspiration to try and be joyful no matter what ! Now that's Premium !
Ummmmmm ! Can you use that word ? I think they have a Patton on it …. Bahaha
Valid
That's why I bought a shirt
Even Will’s use of “premium” was contagious.
They all started using “premium” because of Will.
Premium comment
Needed to fix the drain on my sink so I used CZcams for instructions. Instructions were unclear, now I have a thousand horsepower lawn mower
This episode exemplifies why this channel is just so brilliant. Swindle Willy is right where Ethan was way back when; learning on the job, building risky-as-shit hair-brained jalopy nonsense that is the freshest, most fun you can have on CZcams. Don't ever change lads
But bringing in Will was change. Constant change and evolution is what makes this channel. So... don't change by keep on changing 🤔
Will is hilarious "and look I used a 10mm socket to hold this up" *points to a wrench* 😂
Yes, came to say this - I was straining to find the socket for a little while until the camera panned out…😂
points to 13mm wrench....
Always love how deadpan Ethan is whenever one of these engines start running again while everyone else is showing visual excitement about it. Just adds to the experience every time.
Real talk lol
Definitely has Asperger's.
I think it's funny too, especially because I can relate. After you get a few things running, you dont jump for joy upon hearing it fire, you listen and pay attention to what's happening.
@@jaredlancaster4137 I don't know. It seems no matter how many times I get an old tractor started again, or some piece of construction equipment at work to roar back to life, I always end up with a big smile on my face. Sure, I'm also listening for any possible problems, but I just can't help but smile.
@@jaredlancaster4137 i bet you only date bikini models and never turn around to look at the explosion
I've noticed this in the background a bit, and was hoping for this video soon. Yay!
Super glad it was an "Ethan Left the Kids at Home" build, those are always fun stuff.
They had a raw time lapse video on it maybe 3 or 4 weeks ago that showed the build
I think we held down the fort!
@@Brandon-G-413 Thank you! I was going crazy thinking I had seen this before, but not quite at the same time. I couldn't find anything on the channel either lol
@@GrindHardPlumbingCo You sure did. Good job guys!
The" swindle shopper" is by far the best build you've done without Ethan it's just sick.
This video proves something. Will isn’t just the comic relief, but also has learned some skills. 👍👍👍
Very true!
his progress has been pretty amazing to see. Great job Will!
So glad that Ethan came back in time to catch the 1 thing that would've stopped them before it Ripped.The 'tensioner bolt' was a perfect catch.Those pesky things always snap off and the chain blows otherwise.Dang good build Will !!Let 'er Rip!
I like how Ethan stands there like a proud father when he first saw the walmart express!!
Well done on taking the time to extend the wires on the basket. Beautiful touch.
Love how wild this build is, Will's most premium by far! I hope this thing gets a turbo motor!
I almost forgot how crazy things got when Ethan left us alone for a week…
Fr love the content tho
Un-Supervised ftw! :'D
Nice work. I've got to admit that even just from watching this as a video, the enthusiasm of you guys is a little infectious.
I also watched the time-lapse when it first came out and have been wondering when this video was going to arrive. Thanks again.
Will isnt just a channel goofball with his phone in his back pocket, hes actually pretty skilled fabricator
He’s creating some crazy stuff!
@@GrindHardPlumbingCo Love you guys!
Where's @Boosted Boiz? Kyle's gotta do more that a pit bike motor with a turbo now. Maybe a turbo K swapped Kart
What do the boosted boys have anything to do with this? You’re probably just a little kid who thinks anything non turbocharged is lame.
Bubbles see you cut that cart up he be Pissed 😂😂😂
MUST WATCH -- Will's reaction spectrum at 1:17 Such dynamic acting range!!! in 3 seconds you get: baseline, concern, doubt, turning to surprise, amazement, then briefly fear, pain, then back to happiness This is the premium content that makes this channel genuine! Love it guys! Keep it rollin'.
Wills energy and approach to life is just awesome. He brings such joy to those around him.
Yes He's very charismatic and charming. Can't help smiling while watching.
His joy is contagious. ❤
Wills gotten so good at fab!! goes to show practice practice!
Man don’t you love when they make something so unique!
Boosted boyz.
@@pewpewwithtodd8077that one is cool but this is WAY different
I was worried about Will's usual janky death machines, but he seems to have picked up a huge amount from Ethan since he was last let loose! His presenting has matured a lot as well!
"how much power do you think it makes with three cylinders?"
The answer is plenty. I ran my ranger on three cylinders for close to 4 years before a rod came out the side of the engine and finished it. Cut the rod off the dead piston, but leave the bearing on the crank to maintain oil pressure and some semblance of balance. JB weld the holes in the block and send it.
Y'all's imagination is priceless. So much fun watching y'all work. Positive attitude and hard work ethic always pays off. Thank you
Grind Hard literally have a shopping cart that’s faster than Cars and Cameras drag cart 😂
And the BoostedBoiz cart as well!
Well neither of those use actual superbike engines. Im guessing cars and cameras buggys r way faster then there drag rail
@@Grimm-Gaming Yeah, I love Cars and Cameras, but they have no clue about engines and construction. Triangling? The difference between gas and methanol? And welding?
@@jesperwall839 yeah
The world's fastest shoppingcart without even going over 20 mph yeah that sounds right....
Yes! More please this was awesome to watch 🎉
Thanks! Glad you enjoyed it!
@@GrindHardPlumbingCoI will spread ur cheeks lil bro 😭🙏🏾🙏🏾 I betta not catch you in my comments again or it’s finna gon be OVER for you 👾
You guys are honestly the best part of my day when you post, and if you guys get back to me that would be awesome and even if I had an hour I would want to watch you guys do you're thing for a while because you know what to do and when to do it. A 6 wheeled shopping cart? Not on my mind but when I see that you guys tried I have to watch. Just as a fan to his aspirations I hope you guys keep going with the power wheels builds and the random awesome projects when will is gone. I honestly think my goal in life is to do a build in life with you guys and have you guys teach me what I should know in order to do what you do😊
Even if my messages are out of order, I want you guys to know that you make my day so much better when you post either if it's a new buildor a continuous build, I will always watch because you guys are like 3 of my uncles. He's rebuilt his whole side by side which has a yamaha motor that I sold him which has just over 100hp and I firmly believe that within my lifetime, you guys have achieved far beyond what I ever thought possible for myself and what I would always think as such an influence that is basically impossible.
that machine deserves a new premium engine
Will does better on 3 cylinders than most people do on 4!
For those in the back or not paying attention.
THIS IS NOT A REUPLOAD, THE FIRST VIDEO WAS A RAW FORMAT. yall need to chill about it. They tried something new, and some of yall didnt like it. Im sure theyve made note of it 😂
Loved this build. Hyped to see it with new motor!
I want to let you guys know that I'm subscribed to you'll and a few more CZcams fabrication guys, but the time and thought that Eathon put in his work is over the top, from Cindy, Col., the trike! Are all unbelievable machines, keep up the good work Guys, Tim Proctor #1 fan!
I’ve never seen plumbers quite like these, but I like em’🤘🏼🤣😎
14:41 your music choices are always premium, fellas🤙🏼
I have to say I was impressed with the build. you guys did really well. And thought ahead to what you might need to do to service or repair things. Guess your going to have to go shopping for a new engine. I want to see what kind of 1/8 mile times this cart can lay down.
Fueled by PREMIUM!! lol thats a sticker to make for the Cart. Awesome build! make it break it make it even better.
Given the design and tire choice, least on dirt, they might as well tear down the engine, weld it back together, delete damaged piston and counter balance for the missing piston. Engine has damage but i'm fairly certain Honda made it so it should run with just 3 cylinders fine enough for this thing. No need to waste another big bike engine for something like this. Much rather see one in something actually useful, though diesel engine could be cool one too.
I'm sorry if these messages aren't in line, but all I'm trying to say is that I would literally take anything I could in my power to insure that your channel succeededs, because you guys are honestly some of the most wholesome, straight forward, intelligent dudes I have had the pleasure of hearing about and watching on CZcams, I'm 100% of my human soul believes that you guys deserve the amazing results of the effort you put in towards this, because no one else has ever gone above and beyond like you guys have. 100% my idols, and I 200% want to do what you guys do
Swindle brothers get swindled, love it.
this engine was running on 3 from the beginning, i can tell from the sound
Yes! I love seeing dimple dies. You guys should custom make some hex dimple dies, now that would be premium
29:52 Will looked like an angel for a couple seconds there.
Mannn GHP is my absolute favorite channel It’s cool seeing a different perspective from this video!! Keep up the inspiration!
That was a great video. I love damn bear every one you guys push out, but the fact that you don’t really have a main protagonist, and that everyone’s involved on a level that allows them to also produce quality machines (granted the motor failure wasn’t anyone’s fault…) is by far and away what makes grind hard an infectious entertainment venue for CZcamsrs. Inspirational to garage creators everywhere!
I'm mad jealous you guys have the freedom, time, and resources to do silly stuff like this. Life as hard as you can brothers.
Im so glad you guys just use your incredible enginuity for the purposes of fun and not evil. This level of crazy deployed for any other purpose would be right up there with the most devious of super villains.
In all videos i watch, most sponsored sections i skip!
However in every grind hard video i have to watch them
Cause you guys make them extra premium! :D haha
It was probably doomed anyway but i wouldn't recommend revving a cold motor to the moon like that. Cool project though, i hope it lives again. Will's skills are developing for sure.
Awesome video. Sooo much better than the timelapse-only version! 👍
Rad build, Will - Great work!
Love whenever the OG music comes back!
1:45 is the best ever visual depiction of rich vs. lean I've ever seen
The way you guys work ads/sponsors into your videos is great/brilliant. Very your style, and as a CZcams premium subscriber, I'm totally fine with watching. Thankful for this channel and all your efforts
I love the videos keep up the good work I’m a big fan .
Just discovered you guys, love the energy!🙏
"A children's go-kart and a dream" well this is a literal dream come true
Ro-ta-ry!
Ro-ta-ry!
😜
What an epic rig! Definitely want to see this back up and running 🥳
I'm thinking that the motor blowing was God's Way of saving someone's life! 🤔
Now we REALLY need one of these in any store
seeing a therapist ad in a video about a modded shoppping kart video is not something i expected to see but its so fitting lmao
My Dad had a '69 Dodge Dart with the 225 motor. It blew cylinder #1-hole in the block, piston McNuggets etc. He drove it home (40 miles in the Colorado Rockies, from Denver to Bailey) as is, than took tin cans and Quick Steel, patched and blocked holes in the engine block, corked 1 intake tube, cleaned the oil pan and drove on 5 cylinders for another FIFTEEN YEARS!!!
Amazing video guys....the shopping cart was a total success !!
Great episode dudes! How much power do you think it'll make with three cylinders? 😂🤣😅
this build is SOOOO underrated 💪
It's so fun to see that Ethan use "Hilex" on everything and Will use "circle" on everything.
Will has been sandbagging!! Nice fab work! You might say, PREAMUM!! Also, from the sound, you never had all 4 jugs completely lit,
but damn nice way to finish her off!!
great to see how much Will has learned!
That was engine-rich exhaust!
Okay, cooking the tubes to fit them was so slick. They expand & soften so they will fit over the other the other tubes, then when they cool they grip on super tight. Will proving he's more than a chaos engine with a pretty face.
@24:16 welding in a white hoodie is crazy😂😂😂
The custom wrapped Subaru BRZ is in the background
I saw that
It’s at 27:18
1:38 This is what I sound like after eating chipotle and sitting in a bath tub
“half that rust is in my lungs from welding that stuff dude…that is so sick! 😄” 25:11
Wow! You guys are just awesome! Keep up the great job!
Good job! Keep at it. Ethan didn't do things perfect the first time he tried...All right, maybe he did. But most people can't! 😁 👍👍
I somehow get the abadoned mall scene from Blues Brothers on my mind😁 You've got to run that thing in a store!!
Nice! a very cool build and I hope you guys put a new motor in it. One thing I will say I noticed how old this recording must have been because you guys still had the custom grind hard plumbing Co Subaru in the back and there were still snow out. awesome video! I'm looking forward to more projects
Tip for the header wrap. Soak it in water before applying and apply wet.
that young feller did quite well.... premium build, entertaining video
The advertisement he did, was fucking phenomenal. The way he casually swung down from the loft to tell you🤣🤣 shit was nice bro no doubt, professional right thur
Glad you enjoyed it! Will’s the best
Now THATS what I’m talking about guys! A twin axle gokart! That’s insane man!! I’d like to see you guys get another professional racing kart like that and keep all the bumpers and racing parts on it and make it a twin axle too!
I realize that Edwin might not be as skilled as Ethan and Will but I love to see him help out in vids, does his best to do whatever he can
The O.G. is the Boostedboiz shopping cart. One of Kyle's first builds. A fuel-injected turbo beast.
Add dual front steering and call it the ELF CART
"Not even our fault" is the best line
Dude! Amazing video. Made me realize how much of a gosh darn artist Ethan is! And how hard this stuff is and how easy he makes it look. And OMG you were driving that thing waaaay too fast. Dude, you can hurt yourself out there. I was cringing waiting for you to catch a bad edge. Please add roll protection and a neck support. That thing is RIPE to hurt someone.
Ethan is one brave guy leaving these 2 free to do what ever but it does make good entertainment. The piston is up in the cylinder that baby slung a rod cap through the block ouch🤣
Can I come over & play with some of your toys? My mom said it's OK with her. Guys, that's literally how I feel looking at all the cool stuff you guys build. When I was younger, I would do small projects like that but with much smaller motors. I had a 2 wheel scooter that did 40mph when I was a bowling alley mechanic. I'd get off work at 2:30am & ride through the neighborhood with it wide open & a loud ass straight pipe😂 had a beach cruiser with a 70cc dirtbike engine too. Thanks for sharing
9:59 drone flying in the shop LOL
Are you kidding me? On the first run that cart proved to be RIPPER!
Awesome video Will nice job on the build very cool, stay breezy my boy! Ethan should be proud
Mario ain't got nothing on this badass ride. this is absolute beast nice
That hole in the block is PREMIUM.
I'm glad you match the wheels to each other
I love how you release what looks like something filmed in the winter in late June. Must being getting far behind on the editing of project videos which probably does take a huge amount of time
It is Northern Idaho, I would be surprised at all if there's still that much snow in late may/early June
Suspension would complicate things, a lot…. but you’d probably be a bit more likely to convince a passenger to ride on the back if it has some. Lol
You guys are blessed. I would almost kill to have all your cool tools.
Built, sent, bend, then Rodney came a knocking.
Well done boys!
You guys need a bird eater top hat intake for this
*Fortnite: "You can ride in a shopping cart" Grind Hard Plumbing Co: "Hold my PREMIUM Beer*
Edit( Those Pistons look worse than the Detroit ones)
Hey, I remember when he started GHPC and it’s amazing he is still posting and he has an entire team
When u started after it blew I was screaming for u to put a helmet on in case another chunk blew out the side!! My face hurts from laughing n cheering u guys on the whole video!! Awesome!!😂😅😂😅😂😅