RCA video switcher for turn signal cameras on aftermarket headunit.
Vložit
- čas přidán 14. 10. 2024
- Explanation of what a video switcher.
Video Switcher, Intelligent Car Video Switcher Converter 4 Input 1 Output Switch Video System Auto Parts Car Accessories a.co/d/31xSGAk
Well done bloke, Easy to follow and as you said, there is a lot of wire for cameras. I have an early 2006 BF Fairlane, so I need to install ALL camera's. My Fairlane is dam LOOOOONG so having the 4 cameras inistalled will help me lots when parking. It does have reversing beepers, I'm going to install front beepers as well as the cameras on 360deg view. New camera installs on the side mirrors as my model didn't come out with camera option, had to wait till the next model, FG and later for reversing camera install. Thanks again for your video, helps. Cheers Teddy.
I loved watching your video. It was straight to the point and very informative. I have a few questions to ask!
I am wanting to add side cameras to my car, similar to what the Tesla cars have when you turn on your blinker and a camera picture pops up.
My this project I am wanting to do the installation on my 2017 Ford Fusion Hybrid. It does not have blinkers on the side mirrors but I do have a stock head unit that brings up the back-up camera picture when I put it in reverse. In your video you said if the head unit you have shows picture when you are backing up then you can add side cameras and you can bring up the pictures through the same head unit. I am wanting the two side cameras to be activated via the turn signal.
Would I be able to use my stock head unit's video screen to feed in the other 2 side mounted cameras and tie them into the switcher? I feel ike that would be a really clean look and was hoping I could get away without adding any mini-lcd screens just for my turn signals.
Thank you!
Regular head unit with camera display will work and you can grab the turn signal from the rear blinkers or fuse boxes.
Hell yea thanks for the quick effective video super simple
Happy to help
Will this device signal constant power to your camera for your side cameras? If you take power from the blinker it will be intermittent power and camera would flash on and off
I hope you can help me. I just installed these on the directional mirror lights on a Ram promaster 2500. The left and right cameras come on just fine when I have the key switch set to ACC, but when I start the van the cameras will not turn on when
I try the left and right blinker. They will work with the remote button though. I am at a loss on why this is happening and hope you might have an idea or two. Thanks in advance.
How do you connect this to the factory reverse camera? Thank you for the video!
This is like a cheaper version of the NAV SVS6, yeah?
Anyway to add this to stock head unit on 2015 mazda 3?
@@KailashRajpurohit-m5m no you need aftermarket head unit unfortunately
Looking for this in action.
Do you have a video installation and instruction process?
Does this work for android head units? I want to install turn signal cameras on mine
Any radio that has camera front input
Does that turn on reverse light if you wanna view it while driving down the road
No only if you go in reverse will they light up
Hi
I have a problem with this device. The back camera does not work with it. Is there a solution to this problem?
Thank you
i had the unit and it only lasted 6 months and then my cameras were not coming on and took for ever when the radio started so i had to wait unlike just connecting it straight to the radio. Also make sure you connected the reverse 12v signal wire to the radio so it knows when to turn the camera on otherwise it will never turn on. try putting 12v straight to the camera enable wire and see if it comes on. fyi it distorts your camera image so if it already looks like crap this will make it worse.
Where's the video of you hooking it up
Nice product
I installed one of those and when the camera on the right is working and the brake goes off and the left one comes on
Are you sure you tapped into the right wire? You’re supposed to provide power to the module and then power from your right signal for the right camera to turn on and then power from your left signal for your left camera to turn on so you’re gonna have three circuits to module to power it up and the other ones are to signal when the camera is turned on.
@@mildaudiophile3879does this prevent the turn signals from showing a flashing image if I use this to install reverse cams as turn signal blinker lights?
Can you make the install video please?
Video coming today or tommorow
Install video ?
Anybody know if you can have 2 backup cameras?
Did you ever install this rca switcher?
you will need a interface module im using a meastro rr but there a bunch like pac and metra is your using aftermarket headunits
How to order