MSFS - PMDG 737 + TCA Quadrant Airbus Edition - Reverse Thrust FIX
Vložit
- čas přidán 10. 05. 2022
- 💬 PMDG 737 + TCA Quadrant Airbus Edition - Reverse Thrust FIX. If you have any additional questions, please join my Discord using the link below and I can try to help.
🎮 Microsoft Flight Simulator 2020
🕹️ Thrustmaster - TCA Quadrant Airbus Edition
✈️ PMDG 737-700
📀 Version: V3.0.19
🛒 Sponsored by simMarket: www.simMarket.com
🖥️ Powered by JAJ Technologies
💬 Discord: / discord
🍷 Buy me a glass of wine: www.buymeacoffee.com/iflysimx
Perfect, thanks - I'd had them set OK but going into reverse was redlining the engines which was a bit of a distraction when hurtling down a runway!
Many thanx for finding it and providing the solution !
My pleasure!
thanks a lot! That fixed my reversers from going crazy :D
Glad I was able to help.
Thx mate ! I’ll try :)
This helped alot tysm
I don't have this joystick but on my joystick i just used the same input that the f2 key uses and just found a convenient button on my yoke.
Works fine to cancel reverse just open the throttles briefly then shut them.
hello, do you know how have to setup the parking brake? I have Joystick button 20 and after setup the parking break is cranking. I do not know what position is ON or OFF the parking brake. Any suggestion would be great to make working my parking brake. Thanks,
Thanks mate, problem solved!
Cheers!
I tried like you said, might be a good solution, at least for now. I just started learning 737-700, haven't finished a flight yet. Engines go easily into reverse thrust with this config. Something you could get used to, I guess. I'll leave mine list this, for now :) Thx !
Yea, hopefully PMDG will be able to make it a little easier in the future. Glad I was able to help and if you need anything else, I am more than happy to help any way I can. Feel free to add me on Discord. iFlySimX#0116 . Cheers!
To add onto this, I found that if you dont go all the way back to buttons 12 and 16, the reversers will most likely deploy as well in between the reverser travel distance from idle.
Thanks! I haven't experienced this myself but good to know.
Awesome thanks..
Glad it helped.
Good work mate 🇦🇺 🐨
Thank you! Cheers!
thank you.
My pleasure!
I think the issue (certainly for me) was upon landing it's a bit different, After idle and touchdown, I have to apply reverse (12 and 16), then some slight forward thrust and bring back again to actually get the REV to engage. This momentarily distracts from managing your rollout properly.
Same problem :(
Same here
Thanks! Really helped. Are you able to make a video on your sensitivity settings? I am having issues between idle and idle reverse.
Do you have Discord? I can send you some screenshots if you want. iFlySimX#0116
@@iFlysimX i need it pls i sent you request
@@maiz1604 Accepted!
If you can't find those buttons 12 and 16, head to your TCA quadrant properties and click enable virtual buttons. Then apply, OK and that will work.
Hello, thank you for sharing your knowledge with us. How do you use gear up/down and the parking brake with the TCA Quadrant Airbus Edition? Could you possibly communicate your settings as well? Many greetings
Primus Faxe
You can't switch the landing gear to OFF with the quadrant at this time. Settings can be found in my Discord, which is linked in the description.
Are you using them at their max position in this video? I've got it working, but I'm hitting 110% N1 with full reverse thrust, overstressing the engines and bringing a fully loaded plane to a complete halt and speeding backwards within a few seconds. I have a feeling it *might* be bugged for me, or I'm missing something here.
What do you mean? When I put the reverse all the way back I just give it a tiny push back up and that does the trick for me.
Turns out you need to have "Enable virtual buttons" checked in the Quadrant settings you can access from Windows Control Panel or else this happens.
What do you use for the TOGA switch or is it only via the clickspot ?
Button 1 and disconnect Button 2. Hope this helps!
Thanks for the tutorial...but may I know your sensitivity settings for the TCA Quadrant?
Settings can be found in my Discord, which is linked in the description.
Thanks a lot for this tuto, very helpful. Can you send me your Sensivity settings please I have problem with my joystick.
It's posted in my Discord in the support channel: discord.gg/xTzMfGvNgv
@@iFlysimX Found it, thank you very much =)
@@dedemc849 Cheers!
How did you get it to the idle
The forward throttle is not working for me with these settings
mine does not work for some reason i have the same problem
Didn't work for me, what are your sensitivity settings,straight linear?
Add me on Discord and I will send you screenshots - iFlySimX#0116
So how do I do max reverse
Hello I hope you can help me on this, I just bought the Thrustmaster Tca Airbus edition officer pack, however my problem with the throttle quadrant is that when I play X-Plane 11, the aircraft is a Flight Factor A350 for your information, when I put the throttle quadrant at idle, the throttles of the FF A350 are not at idle. It only went idle when I used the reverse thrust on the throttle quadrant. So there is no reverse on the plane either. I hope this can catch your attention on this matter. Thank you and have a good day ahead.
I don't have X-Plane...
You should see a video about the throttle sensitivity i cant help more because i dont have x plane
ok thanks but for landing gear?seems to have a bug with Tca Airbus
Your welcome! Yea, that's because the 737 has 3 positions. Not sure there is a way to fix this at this time.
If you put the leveler gear up and fast down und again up the landing gear will go up. For gear down it's just leveler down
What’re your sensitivity settings
I answered you on Discord :)
I wanna know to :D can I have them to ?
Where is buttons 12 and 16 ??
Sorry I speak french
quand tu va dans les boutons tu as une liste des boutons t'a juste a selectionner manuellement ces deux boutons la
j'espere que c clair
Wish to get reverse thrust go smoother, from 0% to 100% (don’t we all)
Hey how are you doing
Sorry, it was not clear to me exactly what buttons 12 and 16 are in the device itself
12 and 16 are part of the throtlle axis. Don't worry, if you follow my steps it should work.
NO! u violated the rules airbus quardrent for a Boeing plane AHHHHHH !!!
doesnt work
Didnt work with my warthog throttle i had no throttle response at all
Expected as this is especially for the TCA Quadrant Airbus Edition so not sure if it works for anything else :(
@@iFlysimX yeah i setup the both throttles like you did but then all i got was max reverse thrust and main throttles wouldnt move, i gotta tell ya been simming since early 90’s and ive never seen such a mapping menu as screwed up as in msfs
@@freightdawg6762 Did you make sure to use the 0 to 100 axis and NOT the regular axis?
@@iFlysimX yup sure did
didnt work
Have you checked your sensitivity settings and calibrate the throttles?
@@iFlysimX yes
@@iFlysimX What are your sensitivity settings????
doesnt work