Step 8 Colonial Kit Barrel Draw Filing
Vložit
- čas přidán 10. 07. 2024
- Jim demonstrates draw filing a flintlock longrifle barrel.
Colonial pt. 1: • Step 1 Colonial Kit Ta...
Colonial pt. 2: • Step 2 Colonial Kit Pa...
Colonial pt. 3: • Step 3 Colonial Kit Tr...
Colonial pt. 4: • Step 4 Colonial Kit No...
Colonial pt. 5: • Step 5 Colonial Kit Si...
Colonial pt. 6: • Step 6 Colonial Kit Pr...
Colonial pt. 7: • Step 7 Colonial Kit Po...
Included w/ kits: • Included with Kits--Dr... - Jak na to + styl
When you said you only finished the flats that showed above the stock, I heard my dad shift in his coffin a little.
Mill files have been called a Flat Bastard or just Bastard file. We older guys grew up with that so that might help you younger guys find the right file. And a File Card is a must to keep the teeth clean to save yourself very deep scratches from burrs.
Standing here watching these while I'm nickel plating parts for a different brand of kit. Need to save my pennies for one of your kits.
I've done my research. Jim's kits are in my opinion the best you can get. I am buying one
45 years ago when I first got into muzzle loading and bill large was my mentor and actually let me use his shop - he taught me that “ draw filing “meant exactly that -only draw file toward u never away
The reason I only draw back toward u is to keep chips from going back and causing scratches
Great stuff mate, nice work bud you made it look easy I just might have to get a hold of your kit and do one myself
so much to learn
Well this is a subject I didn't want to tackle. Honestly the machining marks on this barrel(Green Mountain/Kibler) are so faint I was deeply tempted to leave them. I wasn't confident draw filing at least my draw filing would make a big difference. Well I jumped in and worked on one small area on the bottom flat. It went very fast. It mostly changes the tool marks from short perpendicular to the bore to long on the axis of the bore. The latter is more traditional and not difficult so I will draw file the rest of the barrel before browning it. The lock I am going to leave untouched and brown it raw.
I know this isn’t easy but you sure make it look that way. Makes me want to order a kit and try my hand at it. Would a common bench vise with padded jaws be enough to build a rifle?
Thanks--many many hours standing at the bench. Yes, a common bench vise would be just fine
One day I'll be able to order one but not sure I want a flint lock or percussion cap
Thanks for the great video. I’ve just finished filing my colerain barrel, and sanding up to 240 grit. However, I still can see small waves/ ripples along the barrel flats. All machine marks are gone, and the barrel looks great until you look down the length of it with the light just right. Is this a normal thing, or did I not file enough before sanding? Will it show up worse once I brown the barrel?
I have the same brand of barrel and same "issue" if it is an issue. I am wondering how you got on with your project?
I cannot see what you have, but I will take a stab at it. Just as big trucks will impart a "washboard" surface to dirt roads as they stop for intersections, you will get the same type of surface if you try to finish (polish) the surface before you properly establish good geometric flatness. Start with a larger file that will bridge over more of the ripples, and use a coarse tooth pattern to quickly get to proper flat surface. Then switch to a finer file to finish. Use your eyes. His hint of using the marker is a big help, at least until you get used to knowing how to look at it as you work. Be conscious of your light. A moveable light is really good. You really need to see what is happening as you work. I keep a file card (a brush) handy to keep the teeth clean and free of chips. If you get a chip stuck in the teeth, it will leave a nasty scratch in your work. Also, do not toss your files in with other tools. If the file gets nicked or even if a tooth gets bent, the tool will leave a bad scratch every time you use it. A sharp, clean file is a joy to use. Take care of your tools. When you get it all working right, it is pure fun. You will be amazed how quickly you can file in a notch for a sight. You will acquire the easy perfect piston-like reciprocating action, just like a machine. Use a good solid vise. The work must be rigid. Be patient, be critical of your own work. Your skills will grow as fast as you can learn to use what you see to guide your efforts. Good luck sir. (BTW, Mr. Kibler I am a new subscriber. I know I can trust your work.)
Hi Jim
Can You tell me if that is a bastard cut file you used in this video. I read where You recommend Bahco files so I ordered some and really like them.
Thanks for another great tutorial! Could you spell the name of those files or let us know where you get them?
Jason Cothron www.leevalley.com/US/wood/page.aspx?p=69854&cat=1
This is where I bought the Bahco files. Thanks for the comment!
Great video.? If I order a SMR could you draw file the barrel for me since I don't have the equipment? I will pay if you have a price? Thanks 👍👌😊
Draw filing has gotten easier as we have improved barrel finish. All you need is a vice and a file.
Previos was brass polishing? I must back!
Nicholson files are super great files ! Try one , you won’t regret it! Nice craftsmanship!😃👍👍
Realy nice videos!! Hopefolly there will be more of that coming up. Maybe you are iterested to check my aktual build too. Because you are a pro I am very interested in your opinion and ideas. Thanks a lot.