Part numbers to convert to high flow I only done this to a 1990 Freightliner FLD 120 you need to change your radiator you need water pump 3049543 3801708 You need thermostat housing 3013612 you need idler 3064919 1962045 you need water transfer tube 211027 you need water pump radiator pipe tube 3028281 you need radiator connection neck 3018764 you need water bypass tube 213485 and for the intake tube you are going to need to modify once you install the new water thermostat housing assembly your intake pipe will no longer fit I had to go to a muffler shop and ask them if they can make me A couple bent tubes and I had a cut and weld them together
Yes Everything should fit a 444 is the same as a Big cam besides the increase of horsepower and valve covers and some fancy stuff here and there but everything should fit
SHOP AT store.rossairworks.800-290-9798 11 BLADE MAX WIDTH 3.63 F-B 1.90 B-B 1.80 $182.00 + FRT fan this is the price that cost me like five years ago.
how much did this cost you to do? I'm looking at a dump truck that has a new iv in it but I don't want any issues, also do I need to do this if I'm only at 400hp?
It cost me somewhere around 2500. The radiator alone was 1700. It’s a 5 roll radiator. I got that at Detroit radiator. website or you can call. you should be fine with a 400 hp dump truck before we converted this engine to a high flow. It used to be a low flow and we used to pull two trailers 105 500 pounds it did OK. We pull some long heavy hills there was times when it got hot we just have to downshift and take it easy but if you’re a heavy foot guy and you do not want to slow down, you do need a converted to a high flow I like these engines because they’ll never give you problems with any electronic crap, simple, and easy to work on
Yes you need to do it at 400 hp. I had a 335 hp up in canada and it was always overheating. Converted it and turned it up to 450 runs nice and cool now.
Go to the website Detroit radiator tell them that you want a 5 roll radiator. for your freightliner or whatever truck you’re getting it for this is the number 800-525-0011
I don’t remember but it’s been a while I sent mine to Pittsburgh power and I told him I wanted 800 hp all you Gotta do is call him ask for Pete and tell him how much horsepower you want on your injectors and send it to them and they take care of the rest if you want really extreme injectors They make them too
Are you talking about the water manifold that goes on the back you shouldn’t change your original all you need to do is change the front piece the rest stays the same or are you missing the back piece?
I appreciate your video and listing all the part numbers as well, I have a stock BC IV that I'm going to be converting now thanks to your help!
Wow a 750-800hp Cummins big cam very nice, my Cummins big cam is making 550hp thanks to a few mods & a Holset HT60 3537074 turbo😁👍👍👍
Part numbers to convert to high flow I only done this to a 1990 Freightliner FLD 120 you need to change your radiator you need water pump 3049543 3801708 You need thermostat housing 3013612 you need idler 3064919 1962045 you need water transfer tube 211027 you need water pump radiator pipe tube 3028281 you need radiator connection neck 3018764 you need water bypass tube 213485 and for the intake tube you are going to need to modify once you install the new water thermostat housing assembly your intake pipe will no longer fit I had to go to a muffler shop and ask them if they can make me A couple bent tubes and I had a cut and weld them together
Do you have part number for the back water housing or the Amazon Link I can't find it anywhere
How did you know what radiator to put in it ?
My Mexican customers taught me that term guitar intake inner cooler.
Bad ass bro👍🏼
Aren't there flow restrictors in your water rail you have to remove also?
what about the restrictors in the water manifold?
All the part numbers are in the comment section
There’s another video where I explain those gaskets
Another awsome video
That piece that I got off of Amazon u don't have listed with a partnumber
Would these part numbers work on converting a 444?
Yes Everything should fit a 444 is the same as a Big cam besides the increase of horsepower and valve covers and some fancy stuff here and there but everything should fit
Hello there I was wondering if you happen to have the part# for the fan blades or what engine is from
SHOP AT store.rossairworks.800-290-9798 11 BLADE MAX WIDTH 3.63 F-B 1.90 B-B 1.80 $182.00 + FRT fan this is the price that cost me like five years ago.
@@mexicanmexican8682 thank you much appreciated I’ll look into thanks for the info good evening
how much did this cost you to do? I'm looking at a dump truck that has a new iv in it but I don't want any issues, also do I need to do this if I'm only at 400hp?
It cost me somewhere around 2500. The radiator alone was 1700. It’s a 5 roll radiator. I got that at Detroit radiator. website or you can call. you should be fine with a 400 hp dump truck before we converted this engine to a high flow. It used to be a low flow and we used to pull two trailers 105 500 pounds it did OK. We pull some long heavy hills there was times when it got hot we just have to downshift and take it easy but if you’re a heavy foot guy and you do not want to slow down, you do need a converted to a high flow I like these engines because they’ll never give you problems with any electronic crap, simple, and easy to work on
Yes you need to do it at 400 hp. I had a 335 hp up in canada and it was always overheating. Converted it and turned it up to 450 runs nice and cool now.
Good job
About how much did it cost?
The radiator was most expensive of all the parts $1500. The rest of the parts may be 700.
Do you have the number for the radiator
Go to the website Detroit radiator tell them that you want a 5 roll radiator. for your freightliner or whatever truck you’re getting it for this is the number 800-525-0011
What’s been done to your Big Cam to make 700hp?
Which injectors did you use?
I don’t remember but it’s been a while I sent mine to Pittsburgh power and I told him I wanted 800 hp all you Gotta do is call him ask for Pete and tell him how much horsepower you want on your injectors and send it to them and they take care of the rest if you want really extreme injectors They make them too
@@mexicanmexican8682 awesome! Has it been reliable?
Six years ago and still strong
@@mexicanmexican8682 damn! They really are bullet proof! What your mpg like?
Que se gana con esas modificaciones?
que no se te caliente fácil, el motor pueda subir montañas más recio, mantener el motor más frío, no hay que ser negativo compa
Nadie es negativo, es pregunta
Question that water pump part number is what it need ?
To convert it to high flow yes all the part numbers are in one of the comment section
Do you know what the part number is for that piece I can't find it anywhere
Are you talking about the water manifold that goes on the back you shouldn’t change your original all you need to do is change the front piece the rest stays the same or are you missing the back piece?
Are you talking about these water manifolds Water Manifold For Cummins 4060823 here is a part number is this what you’re looking for
Which big cam is this one? Mine looks exactly the same but totally lost since it doesn’t have the factory plate where it says which one it is
Mine is big cam IV
@@mexicanmexican8682first time owning a big cam it the oil change process the same an any other engine ?
I do my oil change every 10,000 miles