Video není dostupné.
Omlouváme se.
Freightliner cascadia DD15 engine high blowby compression leak broken cracked cylinder liner
Vložit
- čas přidán 5. 08. 2022
- WARNING!!: ⚠️⚠️⚠️
Always use the proper tools and safety equipment to perform this job.
Failure to perform the job correctly can result in personal injury or vehicle damage.
Don't do this job if you think you don't have the experience or the equipment to do this job correctly. REMEMBER SAFETY FIRST!
Warning!!! ⚠️⚠️⚠️
This video is just a demonstration of the labor to do to perform this job, the results may vary.
Also, the damage found can be greater that expected and it can result in a massive engine failure.
This video contains advance technician information.
keyworks
freightliner kenworth peterbilt international volvo mack western star cascadia coronado t660 t680 t700 579 389 379 589 vnl vn
cummins isx cummins isx15 cummins n14 cummins m11 cummins isb cummins isb DD15 DD13 DD16 Series 60 caterpillar C15 3406 C13 OM 460 OM471 OM472 OM473 mercedes benz atros DD13 DD15 DD16 60 series class 8 truck tractor
Topics discussed:
why my engine has high pressure in the oil cap
how to determine a problem with your engine
why cylinder liner goes bad
what is the reason why dd15 engines suffer this problem
what are the parts needed to repair this engine
how to prevent this problem
symptoms of the fault are:
engine looses coolant
water coolant in oil
high blowby compression leak
low coolant
engine overheating
low power
engine does not run fine
Tools need:
---
Parts needed
---
Thank you for watching Francisco Amaya CZcams channel
FOLLOW my channel to get more informative videos and use the comment section to share opinions. Also, check my community section of my channel and be part of the surveys and questions about my channel so I can guide my videos in the right direction to give you the best information.
______________________________________________
Now acceping support and donation to my channel.
accepting: personal check, business check, money orders, gift cards, gifts, tools, shop articles, etc,..
send your checks or money orders payable to Francisco Amaya
send your support and donation to:
Francisco Amaya
Via
PAYPAL
www.paypal.com...
(remember to add your address at PayPal donation)
OR
CASHAPP cash.app/$Fran...
Follow me on Facebook
www.facebook.c...
Follow me on Instagram
/ francisco_amaya_youtube_
Check my channel for more videos and information.
/ @franciscoamayayt
Check my other CZcams channel
I.E. euros
/ @ieeuros
Question!?
Email me
franciscodamaya@gmail.com
______________________________________________
______________________________________________
#franciscoamaya
Thank for the help
I like your jacket Francesco
Same thing happened to me. Sudden blow by and lots of oil spilling out of breather filter.
Mad blow by for dd 15
Thank you very much
What would cause high compression in diesel tank?
DD13
I had it exact same issue on 08/14/22. It reached 1167800 miles when this happened I replaced engine with used one eventually..i have another issue the used engine already,the engine vibrate while idling, rpm reads 550 while idling, when I set cruise to 800 rpm the vibration reduced.
I have a dt466 mechanical engine 1year ago had a shop do an overhaul but know it’s blowing smoke from the breather crankcase tube have taken it to couple shops but no help at all . One Mecanic told me couple injectors were acting up but he never returned so I’m stuck with this problem any suggestions Francisco ? Thanks!
Que tal Francisco sabes mi camión tiene 700,000 millas le arregle varias cosas pero ahora sale el humo por el oil breaker que puede ser!
Hey my engine has this problem I drained the oil and drove 45 miles to the shop .
The cylinder liners are too thin by design flaws. Those were stress cracks, the differential between engine oil temp and coolant temp.
You saying the water got too hot?
Exactly right
Exactly poor design
Scerry!I have 2013 Cascadia with DD15 840000 miles🤪What could be the most likely reason for this to happen Amaya?
Man that truck looked horrible. Dirty, beat up and neglected. The guys want to make all the money and not maintain their equipment. The DD13 and 15 are good motors if you maintain them
They might be good engines but this seems to be to a common problem to often with this engine I've maintained my engine and this same problem happened to my dd15
@@jaredortiz7485 what year and how many miles did it have when the problem started? It seems like at 700k to 800k you need to plan on a rebuild.
@@haulingfuel4759 Agree. I bought my '13 with a DD-15 engine with 880,000 miles. It had been maintained by dealership and at 1,028,000 miles, she laid down. Can't complain about it, but it's currently in shop getting ready for an in frame. My only advice is at 800,000 miles, get an in frame done.
@@cumminsrealpower680 man, getting a million miles out of a dd13 is incredible. Hell, even a million out of a cat or Detroit without an inframe and new head is good. I tell people to plan on the truck being dead around 800-900k miles, junk it, or make plans to swap in a Series 60 if you can get away with it.
@@haulingfuel4759 I thought about the 12.7, but I decided to in frame the DD-15 to see how much better it will run. Has ALOT of blow-by, and I'm just curious about how much of an improvement on power and fuel mileage will be.
Francisco i have DD15 detroit and I put 2 gallon oil every morning and nothing show on my engine
NO LEAK
NO SMOKE
FUEL CLEAN
WATER CLEAN
ENGINE OIL CLEAN ???
I’m having this issue as well any luck finding out what the issue was?
ese mi daniel!!
We’re are you located
Where are you located?
Esos motores son una basura!!!!!