Baby Turtle 2" Toothpick - My NEW Favorite Micro?! Review, Build, and Freestyle Flights - Sub250gFPV
Vložit
- čas přidán 26. 08. 2024
- Find all Sub250gFPV’s frames, including all Baby Turtle variants here: www.cncdrones....
Prints can be found here: www.thingivers...
Where can I get this this new 85mm frame 😂🤣 Great Video mate 👍 you make my frames sing 🤩🤩🤩
Much appreciated man! That 2s version is truly something else. Can’t wait to try some more configurations
legend
@@MoeFPV where do we buy it? It’s not on the link provided.
These are temporarily unavailable as they are undergoing revision. They will be available to purchase again soon with some new variants, too ! I will update the video description with that info. Sorry about the inconvenience @@robbmatherly6816
Thanks for highlighting the 2 inch sized hole in my fleet!
What’s up Brundle ! Yeah man, I was never really interested in 2” since I love that 3” toothpick platform so much but 2s 2” is a completely different experience. Just a little GRUNTY POWERHOUSE
YES MOE!!
Great review of the Baby Turtle!
Could also buy the bassline and do the swap!
I need to build up a Walksnail version!
I want a walksnail one too 🔥🔥🔥
True, you can also use the baseline as a building block ! I think the baseline is a bit more expensive than mob 8 though due to that carbon fiber plate. Thanks for the watch and kind words, Tom!
@@MoeFPV you are right about price between the mobula 8 and the bassline. I guess my point is still valid if you already have a bassline 🤣
I do enjoy your take on these things you've been reviewing plus you can actually rip them so that's not to see as well 👍
Soo... you're a great pilot AND a great youtube presenter / personailty? Love it.
Ah thank you very much, man! I really appreciate the kind words : ) i like doing these videos so its a win win!
Jesus I come back to this video after some time and the flow is still siiiick. About to make my purchase of the frames so was reminding myself of valid build oprions
Love your videos! Easy to listen to great knowledge and tips
Thank you very much! Makes me happy to hear because i truly enjoy making these videos : )
Yea I love 2s , that’s that sweet spot !!!🎉
This man doesn’t stop grinding! IGOW finals and still pumping out content 😎
LOL very much DONT WANNA GRIND finals tbh
CLEAN edits at the beginning! 👍
Appreciate it, Johnny Boy!
2" 2s is one of my favorites but I get out of control with it in my small backyard so I recently took a moblite 7 HDzero and put it in a tks rocket frame and put 45mm props on it and it's currently my favorite for my small space.
Sounds like a nice little ripper! I enjoy my 1s quads, as well. Still a great choice for quiet, fun, and safe flying. Ive been meaning to build up a rocket race, as well. What motors are you using, if you dont mind me asking. thanks for the watch!
Really diggin' your vids lately dude. Keep grindin' bro! 💪👍
Appreciate it, Swan! Always trying to do things a little better and find what works for me and what others enjoy. Far from perfect yet but a little better each time - thanks for the words man
That thing flies great, and you're a crazy good pilot dude. This makes me want to make a 2"
Thank you very much!
Got the same 2s 2" quad using the old twiglet frame. 1002 are fun but 1102s are stronger.
Nice builds! Been looking for ideas to build 1-2 2" 2s+ micros this winter. So happy to see more frames coming out. Going to be hard to pick one. Happy for the increasing amount of choice.
I am still very partial to my 3” toothpicks - something about the flight characters gets me. Usually more floaty and drifty. But this 2” was a pleasant surprise - felt like I could fly it a lot more aggressively due to its smaller size and surprised me big time with the punch !
Turned a Mob7 1s Elrs into a 2s Crux3. It's so quiet.
Looks like a fun build. CNC drones makes the AOS T3 toothpick frame too which might be my next build. It's Chris Rosser's take on a toothpick frame tuned for better resonance.
I fly primarily the TP3 and Babytooth frames from FPV cycle and have loved every one I built (one recently on the 13mm motors on 1s). I might take a look at the AOS T3, now that you mentioned it to me though. The 3" toothpick platform is one of my all time favorites to fly. 1s, 2s, even 3s - I feel like its all you need. Thank you for the info!
I'm currently building a 3 inch 1s hdzero toothpick to add to my collection of 2 other drones haha, an open prop 1.6 inch hdzero, and ofc a 6s 5 inch monster
I like that lineup! I love my 3" ultralight toothpicks. Built one on walksnail and its such a fun platform! Not sure id want to go any lower than 2" on a ductless setup but i am trying that 45mm frame so we'll see !
You can also get all these components by buying a HM Bassline. I bought one and transplanted everything to an Odonata HD frame from CraftedKwads and it's a favorite of mine. Planning to get a Baby Turtle and put some RCinPower 1002's I have on it with 40mm props. Good video. Thanks.
What do you do to mount the camera ?
I’ve been following your channel for a while but wasn’t a subscriber for some reason…
I definitely fixed that now🎉
Thanks for putting all of this together!
(I love the new video production BTW)
Also,
Maybe try the new Gemfan 2009 or 2008 on the 1s build.
Those might wake up the high KV underpowered motors😊
Thank you very much for the words! I am trying to up the production of my vids a bit but also looking to improve as theyre far from perfect! please let me know if you have any recommendations for me and thanks again : )
Completely true - I have a shipment of an assortment of 2" biblades on the way. Might be making a 1s walksnail version of this soon 👀@@mstrout
While they do tend to perform quite well, I've been noticing gyro issues with the X12. Got two of them and I just constantly hear little chipping noises from the motors on both a stock Mob7 and my custom 2S 3" toothpick. Haven't been able to do anything to completely get rid of it.
But yeah, micros are going so far lately. I absolutely love it!
Thank you for the feedback - i havent had any issues with my x12s just yet, knock on wood. What behaviors do you tend to see? Is it just the audible noise?
@@MoeFPV On the Mobula, I suspect that the small size and torque are preventing it from being a visible effect. On the 3" toothpick however, it absolutely causes visible vibration and there's an excess of wiggles in the gyro data. (external blackbox) The odd thing is that I took the Mobula's flight controller and put it on a Bassline frame, and it's one of my most solid quads now. Maybe it's all frame related stuff.
Dude super good video, I have been looking for that ripper machine in the 2s tiny category. Getting one of these finished asap, thank you! Also super hyped about your work, I remember watching you about a year ago and seeing your progress is sick! Keep killing it💯
Thank you very much - appreciate the kind words! I think youll love it on 2s. This was really the first 2s 2" i took the time to build up and fly properly and was very impressed at just how capable it was. Could even make it HD, as well! Let me know how yours turns out and thanks again dude
It really flies amazing. I guess I will have to build one too now 😛 Great video and flying 👍
Phil makes great frames! I designed the discus to port over the crux35 parts. but it can also take anything ;)
Wow, I didnt know that - I love my crux35! Sorry, what is the discus? Do you work with Phil often? He is a cool dude! Seems like he's working everyday on FPV !
Just went your channel and saw the into vid! Watching now and subbed!
thanks bud came back forgot to sub so got ya back! you gotta direct solder baby! also just so you know stick to 330 on the iron with the micro boards or you can kill them easily!@@MoeFPV
I love that build, but I still stick with the 65mm propped toothpicks with 1103 8k-10k kv motors. I have one that's down to 43g and it's a beast. I also started flying fpv way back before brushless toothpicks. I had a brushed "toothpick" from the micromotorwarehouse days, then I saw kababfpv make a brushless one and....I was fully in the hobby after that. I was all fixed wing before Mr. Roogi introduced me to crack...I mean toothpicks
Damn ! You are an OG then - thank you very much for stopping by. I was enjoying the mob 8, a 2s 85mm whoop. Are you flying a 65mm 2s ?? How is that experience? I have never flown that setup before. And kabab is my hero ! the Babytooth and TP3 are still probably my choice of quad if i could only have one for the rest of my flying life LOL
@MoeFPV no problem man! The 65mm 2s is 65mm (2.5") propellers on a 100mm frame, one of kababs original toothpicks before the 3". And I too have a 85mm 2s whoop, and it's my go to whoop around the shop or jobsites when I'm there. I was taking part in IGOW this year, but I had a baby boy so that got put on hold lol. I only have 1 or 2 videos of me flying, but they're both the meteor85 2s.
Ahh i see, i thought you meant 65mm whoop! lol ive heard of those being on 2s but sounds crazy to me but what do i know. and Congrats on the baby ! I hope all is going well - IGOW is such a grind i rather raise a kid LOL hope to see you in there next year@@sakfpv8444
Great review buddy! Turtle Fam!!🔥🔥🔥
Thanks llamas ! Loving the platform
You should do a video on the carnage. I love that frame 💪💪
Funny you should say that ... 😇 Might be having a 3" 4s 1200mw walksnail build coming out very soon ! Stay tuned!!
LETS GOOOOO MOE! Babyturtle takeover!!
!! Loving it so far - HD is probably next 👀
Awesome! Can I use my 1202.5er 6000kV Motors for this?
Awesome review and build trips. Iam a new sub and really like micros!!!
Thank you very much! Happy to have you :) and I also really love micros - safe, quiet, cheap , and still a whole lot of fun ! More vids to come soon and let me know if you ever have any questions 👍
@@MoeFPV Happy that I have found your channel! Exactly and very agile :) Thanks beforehand for the videos I can't wait to see more! I will do👍
One quick question, i dont think you showed how you mount the battery to the frame. I have built two of these by now (one 45mm 1s and one 2'' 2s) and i havent gotten the trueRC antenna to fit because my batteries are allways in the way.
A like for landing on the car lol. That was fun.
LOL thank you ! I had a little landing pad underneath to make sure i didnt scratch the paint : )
Thy the gemfan 2040 on the 2S build. I like them so much
Thanks for the advice - I got a bunch of different props on the way to try. I think those might be in the set 🤞
I got myself the 45mm version and I'm thinking of going 2S with some 1103 1100kv. What do you thing about the combo? Will that work? Maybe even work well?
@MoeFPV I love this form factor. I have a couple questions. 1; does the 2s have frame bumpers at the motors? does it need them? I'm worried they might add weight. 2; Whats the lightest caddx vista build that flies well? I have a couple vistas that I could put into a build to get that digital experience (5inch is just too big for my space).
I have another solution for 2” HD - another frame by the same designer called the BAT. video to release in a few weeks but do you have access to the 03 system? I haven’t built this quad up on vista - only walksnail. But the 03 Bat is by far the best digital experience on a true micro I’ve flown
I like it!!! Just got ya!!! Looking forward to your content!!!
Thank you very much for the kind words! Another vid dropping tomorrow! Hope you enjoy : )
2s micros are the shit
Hey Moe. Built one exactly like this - even had the same antenna already. Can you tell me what sort of tune you used? I'm flying the RDQ 300mah 2s batts. Getting oscillation on high throttle punch outs. Thanks in advance. Love your channel and this build!
Cool build. Don’t know that I’d be using a hdzero whoop board though. The boards look very exposed and the hdzero boards are fragile a.f.
I have had some mixed experiences with their whoop lite vtxs. Some are rock solid others overheat if you breathe on them for too long LOL
Great video bro👏👏
Thank you Fer! Appreciate it brother
Yes sir! Hahahaha I'm building a 2S 2" Odonata. My T-Motor F1103 1100Kv Motors are due to arrive tomorrow. I plan on installing the Walksnail HD 1S video, Foxeer Reaper AIO, RadioMaster RP2 ceramic ELRS recever. I'm praying it will all fit. What recommendation for battery Mah?
Sounds like an awesome little build! Depending on the final weight, i would say anything from 450-750s would be fine. I tend to try to run the smallest battery i can while getting at least 3 or so min of flight time. I feel like 550 will be your sweet spot. Please let me know how it turns out or if you post any vids! sounds like a great build
can you please put throttle in your dvr 😐
nice one thanks moe
Thanks Turion! Appreciate it
Just curious, why could you not use DJI's digital platform? Too heavy?
Nitro - mainly i was concerned about the weight and dimensions, as the vista and 03 are all dual stack boards, ontop of the AIO required for the build. Technically, you MIGHT be able to squish in a Naked Vista and an AIO but I would not recommend for this particular frame. You would need to look for a roomier frame to give that board stack more space but there are definitely some available
Moe where do I get camra mount ?
Like you have . I have no clue
Any other hardware I need
I got 2 frames .
Sorry for the delay ! Below are all the prints you need. Cam mounts, skids, antenna holders and battery trays :) if you elected to get the hardware , outside of the mouthing of your aio and vtx, you’re all set
All prints can be found here: www.thingiverse.com/thing:5427107
Great video. Subbed!
Just finished my first full build after breaking too many Crux 35 bottom plates. I went with a RVS Yeet35 frame, Mamba F7 stack, ELRS, and a Vista - while I reused the Crux 1404 motors, I have T-Motor 1507 3800s on the way. I enjoyed the researching and building as much as flying.
I'd love to build something like the 1S in this video - quick to charge and get up in the air. However, the 2S version looks sick!
On a side note: Other than lots of stick-time, what's your method for learning tricks? You have a pretty wide repertoire. Do you practice new tricks in the sim or just send it?
1s and 2s are both great in their own ways. 1s for the quiet convivence and safety and 2s for that extra power and control! To me, you cant pick just one 😉 But i am very fond of the 2s on this platform.
For new tricks, i do practice most of them in the sim to start then move over to doing them on whoops or other small crafts that i am not worried about breaking/breaking other things with. I found that, if i got confident with a new trick on my whoop, i could do it on my larger drones either right away or within a few tries. Just need to keep in mine the throttle when switching between more powerful drones.
And always be confident in yourself when attempting them ! Thank you very much for the sub ! More content coming very soon : )
WOW GREAT BRO FOR SUB 250 grams thanks for sharing👍👍👍
Thanks very much! I will have a lot more SUB250 content coming out in the near future, I think😉
Is this frame still for sale , I can’t find on the web site.
These are temporarily unavailable as they are undergoing revision. They will be available to purchase again soon with some new variants, too ! I will update the video description with that info. Sorry about the inconvenience
Hey Moe! Question: Did you need to ream the motor holes out to fit the 1103 motor screws?
On this version, no I did not. The slightly larger motor screws of the 1103s fit just fine. BUT the new design will probably not accommodate the larger screws without drilling them out slightly , is my guess. I don’t know for certain, but I rather tell you no just to be safe !
Thanks Moe! Yeah I'm still digging the toothpicks. Being able to fly in a Walmart parking lot in the middle of the day with nobody knowing is priceless.😂I'm still rocking the TP3 style toothpicks and I have an 82mm Blujay Walksnail I just built with 1103 motors and BetaFPV AIO board. But the baby Turtle is definitely cool. I'm thinking it might have more protection for the cam and the AIO board. Especially on the Baby Turtle X that's going to come out soon.@@MoeFPV
Awesome review and flying Moe!!!
Did you go with 1.5 mm or 2 mm thickness for the bottom plate on your 2-in build?
Also what are your flight times on the 2-in 2S build on the 300 and 450 battery?
Thank you very much Chrys! I went with the 2 mm for the 2” as I knew I would probably be beating it up 😅 probably would go 1.5 for the 45mm though. On the 300mah on the 1103s I could squeak out about 3 min if I wasn’t gunning it the entire flight. Over 3.5 min on the 450 and I tend to baby my multi-cell batteries a bit. They usually recover to 3.6 ish when I land. Those 1103 11000kvs are tough sometimes because they will sag the hell out of a battery and I never know if it’s going to come back up or give out on me LOL
@@MoeFPV Thanks for the info Moe! I may have to try this platform!
Does the NC Miata have 3 pedals?
@@miguelt.7997 3 pedals and 6 GEARS BABY
@@MoeFPV same here, ND2 6MT
No experience with FPV but am comfortable with 3d printing, lipos, and soldering. Is there a frame/setup recommended for newbies? Are these smaller frames more affordable than larger ones?
For a complete beginner, i would not recommend an open prop build like this. I would get something called a WHOOP, or a prop protected micro drone. Check out the Happy Model Mobula 7 - i think this is about the best drone you can when you first start. Powerful enough indoors and outdoors, safe, small and cheap batteries and will grow with you - as long as you dont break it ;)
dope i dig 2" x 2s :)
Ive been loving it lately! Cant wait to build more - maybe an HD version
@@MoeFPV im still flying with my old school FS HDO. Which HD goggle eco system have now?
I have the HDZ goggles currently. Couple that with an analog module and with the walksnail VRX and you have 3/4 of the systems ! I also bought a cheap pair of DJI V2 goggles off of eBay. But I do primarily fly analog still. What system are you most interested in?
What vtx and antenna setup are you running? Looks to be good for penetration 👌🏽
On the 1s version I had a flywoo 450mw external VTX with true RC singularity. The 2s is an X12 internal 400mw with true Rc singularity
I have the mobula 8 and feel the frame is week. How do you feel this frame holds up in comparison?
Just broke my MOB 8 frame a few days ago... this frame should absolutely fare better than the mob 8 plastic frame. You will also get additional flight performance when losing the ducts. IMO, if you dont need prop protection, ductless drones provide a better flight experience.
Hmm I was looking at ordering a 2inch baby turtle but it looks like all of sub250gfpv frames are no longer on cncdrones site for sale😢. Is he selling them somewhere else? Did you go with 1.6 or 2mm bottom plate?
@@AndyGJorgensen hmm I think the frames might be moving to a different manufacturer - i will ask Phil tomorrow and let you know asap
@MoeFPV thanks I appreciate it I haven't found any info yet on places to order.
@@AndyGJorgensen hi Andy - I spoke with Phil and it appears as though the frames are temporarily not available. I will reply to you on this comment as soon as they are available to purchase again, either on CNC or a different vendor. Sorry for the delay
I prefer 2s on 2inch aswell bro.
Same man - I really wanted to love it on 1s for the convenience but I got SPOILED as soon as I flew it on 2s lol
@MoeFPV definitely, my 2s 2inch is 32 grams, it's almost too quick. I love it.
@@CallistoFPV damn that’s LIGHT! What motors you running? I think these 1103s are a BIT much for this build but was such an easy swap out of the mob 8
@MoeFPV betafpv 1102 old 13500kv ones, (the new 14000kv would be good) with the X12, and on the cncdrones Pickle 2inch frame.
I thought you had a vape in your hand at the begging of the video 😂
It’s my special edition MIC VAPE
Micros aren’t dangerous UNTIL you’re standing on top of a military fort while Moe’s flying #neverForget 🤕
That’s why I’m confined
Damn now I’m getting more impatient I need a fucking aio for mine now. I’m doing a 1S 1102 22000kv 2” version with a happymodel x12/or elrs 2.4g aio
Please let me know how it flies ! This is the exact configuration I wanted to test but didn’t have the chance too. I think those 1102s will handle the 2” a lot better - I am curious about power and flight time. Hope you get your AIO ASAP !
@@MoeFPV def just sent in the aio that was DOA and once pyrodrone credits me imma order another.
First time viewer
Thanks for dropping by! Hope you enjoy :)
Where can I buy it?
You can find the Frame here! 40mm, 45mm and 2" versions available. www.cncdrones.com/philip-hunter-.html
@@MoeFPVthank you
@@nack1686 Np!
@@MoeFPV I'm in Thailand, can't order.😅
@@nack1686 oh no - man I’ll try to get back to you with a solution or a different frame option you will be able to buy
what's a 5"? lol nice rip
LOL who needs em ;)
Зачем накрасил брови?
Funny play with your GF 😂
Lol she’s gonna start hearing my whoops in her nightmares
@@MoeFPV Mount a box of chocolates on a Cinewhoop. And fly to her. This is how beautiful dreams become. 😄
LOL i really like that idea - might be dangerous for her to pick one out though since i wont disarm ;)@@Sugalime3D_FPV
@@MoeFPV 😂 By the way, I have decided to equip all my carbon frame micros under 3 inches with prop guards, among other things I simply cut out whoop frames... I may show this in a video in the next few months. The reason: I tend to fly these micros in small parks where there are always a lot of people walking around... You can also get closer to objects...What you need are extended motor screws... By definition they are no micros anymore, but carbon whoops...
Thats a good idea - i love the safety of whoops, as well. Just peace of mind knowing youre flying something that cant really do much harm and people tend to not mind when you hold up a little prop protected whoop lol looking forward to your vid@@Sugalime3D_FPV
Baby turtle is discontinued...No where else to buy them now? @moefpv
Baby turtles are temporarily unavailable for revision but will be back up soon and with a few more options, as well ! I’ll try to comment on this post again when they are available to let you know