LIVESCOPE SETTINGS LVS32 LVS34 USER FRIENDLY
Vložit
- čas přidán 23. 02. 2023
- Settings for LVS32 and LVS34 in forward, down, and perspective. Also tested 0 degree vs 8 degree mounting options while looking at the bottom. Bonus Fish Catches and views included.
Using Seelite 2.0 Livescope Pole, Cornfield Folding Double Mount, Universal Gooseneck Phone Holder for "IPilot Remote", Garmin 126sv's, 106sv, UHD 93, Solix 10, Ulterra 112, Avid 21FS Bayboat, - Jak na to + styl
Best comparison so far. Still happy with my lvs32 after seeing this 😊🇧🇪
Right on! Love my 32, it’s my old fishing partner, still makes the fish glow.
Best comparison I've seen! Appreciate your hard work! Subbed
Thanks for taking the time to comment and sub!
Very very helpful thank you
I'm glad it helps!
Thanks so much, I truly appreciate your help on explaining some things. It helps put the missing pieces of the puzzle together. Really do enjoy your channel very much thanks once again
Hi Daniel, glad the video helped! Thanks for watching the channel and the awesome comment!
Nicely done!
Thank you, appreciate the feedback!
Appreciate the video on your settings! My ls34 comes in today
Awesome! Hope you get on the fish!
Awesome video, you have a great channel!
Hi David, thanks for the comment! I’m glad you enjoy the channel!
The livescope messiah will lead you to the fish. Great work sir.
But will they bite? Thank you
Great video
Glad you enjoyed it
Thank you
I've got to get me at least 1
Thank you for sharing! Very informative on setting up the graphs settings. I see you have a Seelite trans pole, I personally can't swing the $$ for, any suggestions on second best that you may have looked at?
Thank you, never tried another pole or even shopped for one. Try to get a pole with a pivoting arm.
👍👍👍👍
👍🏽
Like Your video
Thank You! Hope you get dialed in
@Carlos Padilla working on it..thanks👍🏾🤞🏾
What network hub are you using? In my upgrade "rebuild" I'll need to network 7 electronics. I'm currently using the "Breezy Box" network hub. But I'll need more ports for this next build
Garmin GMS10 with 5 ports located in the hatch under the bow graphs. 2 ports go to the 2 GLS10 black boxes. 2 ports go to 2 Echomaps on the bow. 1 port goes to the Echomap on top of the console. The Echomap on the console has 2 ports, 1 from the GMS10 and 1 that goes to the built in UHD 93. That sill leaves the the 2 cradles mounted on the bow with 1 port open on each one. Good Luck on the build!
Where did you get that mini a rig? Great video, thanks for sharing
Academy, I think by the spinnerbaits. Thank you, and happy to share.
I've got a 7" UHD Garmin, it's supposed to be LiveScope compatible, but I question if it's even worth buying with such a small screen, or should I just save up and upgrade everything 🤔 and should I go with the 32, or the 34 🤔 so many questions 😂 not even sure where to start!
In my opinion, get either transducer unless you need to see your bait past 60 feet. The 7” with Livescope will out fish any non live sonar setup.
I’m really conflicted. I ordered a garmin 126 ultra, mostly plan on fishing like 10-14ft of water for crappie (shallow lake where I live) I don’t know if the 32 or 34 is better for me, or if the 34 is worth the $800 price difference. I’m primarily a bass fisherman, but wanting to start crappie fishing now. Any suggestions?
I would go with the 34 for the extra money, even if it’s just a little bit more detailed. The 32 is great, but knowing you have the most advanced live imaging transducer is worth it.
would love to see settings with the side imageing unit and images.. thanks.. im going to do some tweaking on my garmin 1222 as you are getting great pictures.
I’ll try and do that
I put some of your settings in my 1222 and had improvements,, thanks,, I tried setting my install height to 2 feet, but had trouble locating my jig so im going to put it back to 1 foot and see if it improves,, I wish they had it in inches, like 30 inches.,, @@CarlosPadillaCentex
Can you recommend a desent 12 inch graph that compatible with the plus?
126sv has been great. Has a touchscreen and quick disconnect mount.
Is this the ultra version of the Garmin Echomap? Good video!
Yes, Ultra 126’s on the bow, Ultra 106 on the console. Very good graphs, even with glare they are very easy to see. Thank you!
Garmin Panoptix the best 👍👍👍
👍🏽
could you tell me the mount you're using (the bottom one) at the 28 sec mark of this video ? I wanna get one like that. thank you !
Not sure which one, but both mounts are Garmin 0 degree.
@@CarlosPadillaCentex
Did you get them From Garmin ?
Thanks
Garmin or a Garmin retailer
Have you seen any interference running both at the same time. I don't know if they are using the same frequency or not but would assume so. Easy enough test, just turn off one and see if the others picture changes. I only have the lvs34 but just curious.
No interference on Noise Reject High. I’ve had the 34 at the bow alone, and I’m pretty sure the picture is the same.
If you think about it. This wouldn't work like typical radio frequency interference where you'd be getting a different signal. Especially with them being so close and oriented in the same direction it makes sense that if anything, you'd only be getting a stronger return and perhaps a few fish on screen that are returning from slightly outside your beam angle but even that doesn't seem to be happening here since he still sees two different images for each.
Carlos, I have the Garmin Echomap Ultra 126sv like you but do not have LIVESCOPE yet. Bass Pro has the LVS32 for $999 and LVS34 for $1699 is it worth the $700 difference or should I get the LVS32 for $999? I also intend to use it inshore saltwater fishing the flats and bridges in Florida. Please advise.
czcams.com/video/vKreueWxxqE/video.html
This Video has the 32 and 34 on top of fish. The top graph on the bow is the 34, the other 2 graphs are the 32.
Get the 34, if you get the 32 and think your image is not good enough, you might blame it on the 32. They both are equal at about 30 feet, closer than that the 32 shows your bait bigger and it’s easier to track. Further the 34 shows your bait better and is easier to track. They both show fish pretty far out maybe 80 feet. Just my opinion.
@@CarlosPadillaCentex Thank you. I think you are right. ☺️
What holder is that in your remote ?
Lamicall Phone Holder Bed Gooseneck Mount - Cell Phone Clamp Clip for Desk, Flexible Lazy Long Arm Headboard Bedside, Overhead Mount Stand, Compatible with iPhone 14 Plus / Pro Max XR X 8 7 6 Plus
where did you get the phone holder great idear
I got it from amazon, google “adjustable phone holder clamp” I was recording the front livescope screen using the holder and my phone, I put the remote in it one time, and knew that was it’s new home.
What sounder bracket is that? Can you adjust height?
Seelite, the silver collar is the height adjustment with a set screw.
Sorry man. I meant the bracket your 2 x screens are mounted to.
Oh ok, it’s a Cornfield fishing gear folding mount. Easy to switch from 1 to 2 graphs with a bracket they have.
I just upgraded to the lvs34. Do I really need to? No, I don't but damn, the 34 just looks so much nicer that I can't help myself. I'll have to look into selling my lvs32 for half price and try and make up something to help offset the cost. 😅
It’s an upgrade, but not 30% better as claimed.
@Carlos Padilla you can see up to 100-120ft forward range and with target separation from other videos I've seen compared to only about 60-80ft on the lvs32 so that's about 30%. 😄
Although I have yet to see it for myself to make that comparison, I'm still looking forward to the extra range because that definitely helps for ice fishing.
What screen monitor are you using
On the bow 2 126sv’s. 106sv on the console.
What model minnkota you have
Ulterra 112 36volt ipilot with link
You’re missing an important tuning tool in focus
That could be useful
Why not just use a single transducer? It will run both.
True, when I got the LVS34 I had planned to sell the LVS32. They are both great tools, so I started doing a lot of testing using both. Still testing.
LVS 32 And LVS 34 have the same specs
👍🏽
Wow there is a reason your getting alot of feedback you should never have to run noise reject on high your losing alot of return doing that
Yes, 2 transducers at the same time