Cheap Turbo Lincoln Engine EXPLOSION, Can We Save It! - Tony Angelo's Stay Tuned
Vložit
- čas přidán 18. 05. 2024
- We’ve really done it this time! After 20+ HARD dyno pulls, and half a pass down the dragstrip, the all aluminum 32v engine in our dirt cheap turbo Lincoln build has finally sought out higher pasture! Apparently these engines don’t like 17psi?! How bad is the damage? Can we save any of the pieces and take this project to the next level? Stay Tuned to find out what Tony and the crew discover!
----------------------------------------------------------------
Chapters:
0:00 - Intro
2:07 - Dragstrip Recap
4:44 - Carnage Guesses
6:46 - Engine Holes!
8:23 - Teardown
18:27 - Autopsy Report
19:44 - New Powerplant!
----------------------------------------------------------------
Grab the New Stay Tuned Shirts and Gear at: tangeloracing.myshopify.com/
We appreciate YA!
Send Me Stuff: PO Box 68 Spring City PA 19475
Instagram ► / tangelo96
Edited by ► / thakingofhearts
Tunes by The Subtastics subtastics.bandcamp.com/
----------------------------------------------------------------
My Partners:
Eastwood Tools►www.eastwood.com/
Dorman Products: www.dormanproducts.com/
Grease Monkey Gloves Available at Autozone, Home Depot and more!
Miller Welders► Click the link to Grab Our Synchrowave 210! www.millerwelds.com/equipment...
----------------------------------------------------------------
Subscribe to our CZcams channel for new videos every day! bit.ly/HagertyCZcams
Visit our website for daily automotive news, cars stories, reviews, and opinion: www.hagerty.com/media
Stay up to date by signing up for our email newsletters here: www.hagerty.com/media/newslet...
Follow us on social media:
Facebook | / hagerty
Instagram | / hagerty
Twitter | / hagerty
If you love cars, you belong with us. Hagerty Drivers Club is the world’s largest community for automotive enthusiasts. Members enjoy valuable automotive discounts, exclusive events and experiences, roadside service created specifically for collector vehicles, and a subscription to the bimonthly Hagerty Drivers Club magazine. Join Hagerty Drivers Club here: www.hagerty.com/drivers-club
Like what you see? Watch our other series including:
Redline Rebuilds | Time-lapse engine rebuilds from start to finish bit.ly/RedlineRebuild
Barn Find Hunter | Tom Cotter searches the country for abandoned cars bit.ly/BarnFIndHunter
Jason Cammisa on the Icons | The definitive car review
bit.ly/JasonCammisaICONS
Revelations | Untold Stories About Automotive Legends with Jason Cammisa
bit.ly/JasonCammisaRevelations
Contact us:
Suggestions and feedback - videoquestions@hagerty.com
Press inquiries - press@hagerty.com
Partnership requests - partnerships@hagerty.com - Auta a dopravní prostředky
This thing is an intercooler and some ring gap away from greatness. Love this show!
"How much does a $5 footlong cost these days with inflation?" Not kidding I walked out of a subway the other day when my total for just a footlong was over $17. I'll never go back
Damn ridiculous I'd say I had the same experience a Gatorade and candy bar was almost 11.00$
I hear ya. Out here on the road they gouge the hell out of us knowing we don't have many choices. Two cheeseburger meal at McD's is $17. It's beyond ridiculous.
@Haulin' Class TV at that point I would be living out of a yeti cooler. That's messed up
Should have not even walked in because their food is garbage 🤣
@racer89gt yeah it's hot trash at best. I was driving across country
Probably my Favorite episode so far. I have enjoyed watching Tony on motor trend but now to see him just hanging with his buddies, enjoying life, spending time with his family and making less scripted videos.
I just bought a mint 1997 Mark VIII LSC. Black on black with only 30K original miles, I'm the second owner from new. I already lowered it and added 18" Vision wheels. I love it and it rides so nice. I've also had a pro-charged 03 Mach 1 that made 415 to the wheels on the dyno and a 2003 Marauder that was bone stock. I've had good luck with these 32 valve engines. My buddy has a 2016 Camaro SS and he was really impressed how strong the LSC felt. Can't wait to see what you guy do with this car. PS, please don't put an LS in it!
If they put an ls in it I'm unsubscribed. Sick of it
@@ummduhgmail what do u expect only way a Lincoln will ever be reliable for multiple passes is with an ls 😂
15psi + stock ring gap = this motor. Man that was some epic carnage.
These big power on the cheap projects are great! Hopefully you keep it up, it's nice to see something obtainable being built
Such a relatable build, everyone just wants to go fast! Thanks for watching!
Pizza bit totally got me. I was on the edge of my seat waiting to see the new motor hahahahahaha. Can't wait for the next one. Awesome work guys!
Love the episode, and the show itself. I really appreciate that you’ve got mics on everyone now; it makes it a lot easier to follow and broadens the cast from “just Tony is important enough to rate a mic.”
I loved the new powerplant reveal at the end. It's what I would have chosen too.
"Sometimes the 10 mm socket you are looking for, are the friends you meet along the way"..... We now have your new t-shirt, Tony.
The carnage in this episode was incredible! Amazing that even TA could cause destruction at this level.
Man Tony you guys are seriously the only reason why I keep the YT app on my devices. Guys like you and your team are the reason why I love cars so much man. Keep it up!
ya O K ..................
Thanks man, appreciate that!
Me, 95% of the way through this episode: "Where the F is the pizza?"
30 seconds later: "Ah yes, there it is!"
hahaha, we run on pizzzzza
My vote is to get another Teksid block and upgrade everything that failed.
Follow through with this so I can learn from your mistakes because I bet my budget is smaller than yours. HAHA
Im pumped for more Mark 8 love!
Really tho make it happen!!!
Trouble is the rear wheel drive teksid blocks are getting harder to find. They stopped making mark 8s in 98 and they weren't SUPER popular to begin with despite being a decent car. I've only seen one cobra in the junkyard ever and that's because it was in a bad fire so hot the metal valve covers melted. Any of the 3 different aluminum blocks should hold 1000hp, though the WAP and NEMAK varieties a different motor mount bolt holes, everything else should more or less work.
@@ElPants21 You can find alot of Mark Engine Blocks in Junkyards, from time to time
@@Jacobprogammer not by me. Not anymore at least. I pull them to sell for parts. I've bagged probably 20 over a few years but increasingly less I suspect due to age and used car prices
@@Jacobprogammer and the FWD continentals have a different bell housing bolt pattern so they're no use in a RWD application
Look on the bright side. You can reuse the alternator bracket.
1 of my favorite videos, can't wait to see what's next. Thank you for sharing, everyone keep yourselves and love ones safe and healthy and remember to SMILE 😃 😊
Tony Broke it.. Again.. Great Video, and yea build it.. doing it cheap once or twice is cool, doing it better than the other guys (Cleetus and Finnegan) is what keeps everyone happy.. That Lincoln could and should be your next Burn out car for Cleetus and Cars.. IMHO
I loved the pieces falling out as you flipped the motor to remove the heads.
I almost didn't recognize Tony cleaned up. 😃.
Great follow up. Glad to see what the limit is. Thanks for the great conversation at sick week.
Thanks for coming out! More to this one for sure, can't wait to get it back on the road.
Ring gap might have saved it 🤔
More than likely. They probably kissed.
Awesome, loved the tear down reveal. If build it cheap is the idea, get another exact 4.6 turn the boost down & run the heck out of it. Be great to see what the motor could reliably take.
Thanks for watching! Yeah another stock motor and keep the boost down would work for sure.
@@StayTunedTA - No, this is ‘Murica! At a minimum open up the ring gaps on the replacement engine. Better yet replace those hypereublowup pistons, some better rods and ARP fasteners and then crank that sucker up!
@@danmyers9372 for real. That 4.6 will take some power with a little thought put into it. Sucks they trashed a teksid block already.
When your new episodes drop I can’t stream them quick enough. I love your “quirky” projects. Main stream is lame! Keep up the weird. I love it!
Good lesson about intercoolers and engine management
Plenty of malice in the combustion palace. Piston McNuggets and inspection ports are sub-optimal.
Those 4.6L are tough tho.....💪
The "GET THE FUCKOUT" when Barbalinardo sees the second hole in the block 🤣🤣🤣
When the Intech/4 valve mod motors came out, they had a habit of scattering cranks under boost and traction conditions. That's why the 03/04 cars had such overbuilt bottom ends. The teksid blocks are strong, but not when the cast crank and rods decide to take a siesta out the side.
Two options. 1) replace with same but open it up and inspect, ring gaps, new bearings and seals. 2) replace with 4.6 SOHC, upgraded rotating assy and trickflow heads.
Man, I wish I knew some dudes like this to wrench with. This looks like so much fun.
Haha I'm Rollin about the oil dry 🤣🤣🤣
Please get this project happening & continue development! Great viewing guys!!
Thanks from South Australia 🦘👌🏼👏🏼
Tony in a sweater made it worth watching to the end.
Cant believe you broke that Teksid block. All us ford fans are weeping.
Nice job guys 👍👍
"It was spinnin real fast... then it wasn't." 🤣🤣🤣🤣 Great episode!
Tony blowing stuff up is what he's best at and that's not the first track he's lubed
Hopefully Tony learned his lesson there. Nothing much worse than pissing off the track crew.
Liked this video for the 10mm socket statement. I will use that one in the future.
Coincidentally, I was eating pizza while watching you guys dissect that beautiful disaster.
Tony go with the C-head motor found in 99/01 cobras, Mach 1s aviators.
Good luck finding one for a reasonable price.
@@danmyers9372 some places let you snag the Aviator motor for cheap, but at that point why not get a 32V Navi 5.4?
I saw one a while back on another channel, this particular 4.6 had all 8 pistons at TDC. This engine had multiple holes in the block along with broken crankshaft. Heck, even the heads were trashed. The channel is called I Do Cars.
Best display of omni pistons, iron distribution and escape rods :)
Best way to end an episode ever!!!
This game a flash back to when Tony blew the transmission in the Earlcamino and soaked down the strip in atf. Lol.
Love this project.
Luv the sawzall wiring removal!
Under normal service conditions these engines are bulletproof. This is what comes stock in the Crown Vics that you used to see everywhere being used as taxi cabs and police cruisers. Everything is bound to break when you push the boundaries on a high mileage motor.
Nope. These are DOHC motors
@@Bigbigpoopi so this is not the 4.6 L V-8?
@@vayabroder729 it's the DOHC version. Same in the Marauder, Cobras had an iron block. We're SOHC
the 03/04 cobras got iron blocks, 96-99 cobras got this exact same long block as the mark8. What failed here is basically the same across all non supercharged 4.6s 2v, 4v, even 3v use the same thin connecting rods and same piston rings.
I was driving my belovet VW Passat R36 with its low front bumper towards the bank to withdraw all my cash, when a Duesenberg with road presentation zoomed past me and accidentally crushed a pair of vise grips on the road. Despite the minor incidend, I continued on my journey, enjoying the scenic views and the feeling of the wind in my hair.
Thanks for reading my comment despite the facd it doesn’t have many likes.
Great content! Very impressive for 17psi!
Good work, good test, you found "a" limit. Really good top limit for the money.
It always big power with tony under the hood.😎👍
The end had me rolling. 👌
Sintered metal rods.... 400 crank hp is all I would ever put through them. After that, forged H or I-beam rods are a must. Ford figured that out when they supercharged the 32v
Whoa 8:58 I felt that 😟
I need a "It Was Spinning Really Fast..... And Then It Wasn't" T. Angelo shirt.
Quickly becoming one of my favorite channels tony..
The intro was hilarious😂😂
love the stuff that anyone can do in there garage on a decent budget
When the truck backed in I thought it was a big block and it was!!!
I wonder if dialing down the boost to 300 would have saved the motor. Nice of ya'll to keep going at it.
Absolutely would have, but we like to party over here in the Stay Tuned shop! Thanks for watching!
@@BarbalinardoInnovations - WTH fun is that right? More blow ups just means more pizza.
The stock rods typically check out in the mid 400s. Allegedly the cast crank is good for close to 6. The steel 8 bolt crank in the mustangs have been used to 2000+
I had a buddy in high school with a 4.6 DOHC cobra and a Vortech super charger. That thing was fast as hell in those days and sounded nasty (as mustangs tend to do, even if they aren't). Reliability was not in its vocabulary.
I'm fucking loving the energy of the crew and the videos, keep it up guys!!!
Hi, I'm a Ford guy, and all around car nut. I really enjoy your channel. Just a thought, maybe find a Same model year Cobra block. Pretty close to same engine. Cobra has forged internals. Look forward to future episodes. You rock 🤘
Probably would have helped to increase the ring gap
Nobody breaks it like Tony!!
The episode I’ve been waiting for!!!!! Love this build and Tony had me rolling laughin when we was sprinkling piston bits like salt 😂😂😂😂
Yes, the best Italy has to offer! And pizza too! Great episode guys. Can’t wait to see how you dig out of this one.
Best music of any car channel!
Fun tear down. That is CARNAGE though... Wow.
It's always snapped rods or spun bearings on 91 to 04 mod motors. Breath a little boost on them and pop goes the weasel. I still love them, but Chevy did powdered metal rods with great success on their first try. And I'm a Cobra owner saying this.
I was waiting for this. Amazing that there was no studding. It lived a long life with great aerodynamics and died doing what it loved. As an Ohioan, I blame Florida.
Ohio would be quick to give Florida the national attention back huh 🥸😂🤣🤣
There's a reason people run e85 on stock ring gap motors it keeps the heat down. I have made 697 to the tire with a 5.3 on 15psi but it's turned down and makes 520 wheel on 9.5psi on the street. It's been like that for 3 years a good tune and e85 is the way to go. I am doing my first 4.6 turbo here soon and will make a video on it.
Love that body shape had never seen one before you guys made that episode. Im in Australia once a vehicle is 30 years old we can legally drive them left hand drive. I want one.
You three need to do a top gear style cheap power build off and competition. Maybe one year do drag racing, next year do drifting, and the next year rally. I don't know, just thinking how to build off of you guys' charisma and energy as a group.
Love the video guys, but the shop has a lot of echo. Throw up some acoustic treatment, you can buy 3.5" mineral wool panels, wrap them in black denim, and just scatter them around the place for $25 a piece.
Powdered metal rods and pistons just became powder puff parts ! BOOM TOWN SPLATS
I like how you make me care about a Ford and an S13. But the Firebird is crazy awesome and I love your Demon. You guys rule - can't wait for the new power plant - let's go!!!
Hell yeah my can't wait to see the 32 valve
Excellent episode
That's what I call GRENADED.
That will buff right out.
right on target tony!
Get another 4 valve! The 93 to 98 marks have the best blocks just change the heads cams and put the terminator Cobra crankshaft and put 04 Cobra rods and it'll be able to handle boost
ahh the sawzall....my fav tool.
Yep, looks like you sent the rods out. 4V 4.6 rods are weak af. They're ok for NA builds but for boost, not a good idea. If you want to continue building a 4V 4.6, get 3rd gen Coyote rods and pistons. The crank seems to be ok up to 500hp or so. Also Livernoise valve springs should be solid and 100% get Felpro gaskets! That's probably the cheapest way to make reliable power.
I have to watch this again 😂😂😃
My vote is to find an engine out of a junkyard, preferably from a tuned Mustang that got forged connecting rods, then slap a turbo on it and run E85. You'll probably have to change the fuel lines, injectors, and fuel pump to prevent the ethanol from eating the gaskets, but it'll definitely help with pre-ignition. Another option that would be a pain in the ass, because I doubt anyone makes a harness adapter for it and nobody in the shop will ever want to bother extracting and then transferring the engine harness and controller for it, but the 3.5L Ecoboost V6 that Ford makes is ludicrously capable. Like, you can take anything with that engine, add in a mod chip to trick the boost controller, and make over 400HP with little effort. And it'll still run on pump gas. But it's a pain in the ass to implement and nobody wants to bother, because there's too much modern tech on that engine so you can't just toss it in and expect it to work. Definitely not as simple as an LS swap. There are companies that have pre-made engine harnesses for cars that are commonly LS-swapped.
Tony Sickweek was killer, loved that big Buick Electra, $1100 dollar Lincoln’s all day , keep up the great work!
"OFFERINGS TO THE GODS OF SPEED " Tony's specialty! 😆 Love ya Tony! Thrash on!
DIRTBAG SCAMMERS BEGONE!
Mrk 8's were cool for the time but they were electrical nightmares. When I worked at Lincoln around 2000 none of the mechanics wanted to touch them when they came in.
Was waiting for this vid after you posted looking for a good bottom end not a week ago lol.
Wouldn't mind that pickup pulling up with what was under the tarp to my house
Ahhhhh Maple Grove raceway! I miss the East Coast!
Nice to see the oil pickup filled with Kosher salt. With piston pieces stuck in the valves, I bet there are some in the intake as well.
Grenading is a word that comes to mind.
Miss you on HRG. Not the same.
A $5 footlong is $14 here in Arizona
Navigator 5.4!!!
Gen one 4.6 l V8s blocks are your best bet Tony can't wait to see what you got lined up
When you get all that power back in the Stinking Lincoln please do something about the one wheel peal!
We knew this project wasn’t long for this world
I ran 17lbs of boost in my Lightning once…… anyways all 2v or 4v 4.6 rwd engines blocks are the same. Good thing is the coyote rods will work in the older modular 4.6. And depending on year they should take 600rwhp with ease. Also the teksid block is what you want for 4 figure hp.