I was wondering if it dries to a hard exterior or does it feel rubbery? Also, are you trailering this boat? I’m curious to what the trailer bunks would do to the finish.
Nice job.. I got same size boat u got..I was wondering if I paint it green first and get a clear flex liquids just like the black colored..paint the new paint and then clear coats over it..will that works .?
Very easy, maybe 20 mins. Prep work all I did was wipe debris off with a paper towel. Pretty easy. The boat still stays dry, this was the easiest and best way to stop the leaks. Thanks for watching
I wanted to ask a question. I am doing the same thing to a Jon Boat. I wanted to ask about those Mini Kota trolling motors. I have a Mini Kota Edge trolling motor. About on average how long does a battery last say in hours on these boats?
I use a marine battery for a 30lb thrust trolling motor. Fully charged I get about 5-6 hrs, using any speed. Before I use to use a small car battery, it lasted about 2 hrs
Awesome! Thanks for the response. Do you think one can would work on a 1436? Painting the back and front and bottom like you did. I’d like to try with one can but tempted to order another while I’ve got all the supplies and boat flipped
Good to know one of the tv "Miracle products " actually works! Looked easy enough to apply too.
Yes, was easy and works great
Glad the flex seal worked! Cool drone shots too 👍
Thank ya kind sir
@@LifeWithKernelLee YW
It certainly looks nice, hope it holds up for you !!
Thanks, seems promising
I was wondering if it dries to a hard exterior or does it feel rubbery? Also, are you trailering this boat? I’m curious to what the trailer bunks would do to the finish.
Yes it does have a rubbery feel. I just put it in the bed of my truck or sometimes in my cargo trailer
🙂☝👍 good stuff.
Worked great
Nice job.. I got same size boat u got..I was wondering if I paint it green first and get a clear flex liquids just like the black colored..paint the new paint and then clear coats over it..will that works .?
I bet that would work
No you need to be down to bare metal or product wont stick properly and when scratched will start to peal bond is everything with this stuff
Any opinion on if the texture increased resistance and slowed the boat at all?
I didnt notice any difference
Seems simple! What kinda prep did you do? How’s it holding up?
Very easy, maybe 20 mins. Prep work all I did was wipe debris off with a paper towel. Pretty easy. The boat still stays dry, this was the easiest and best way to stop the leaks. Thanks for watching
I wanted to ask a question. I am doing the same thing to a Jon Boat. I wanted to ask about those Mini Kota trolling motors. I have a Mini Kota Edge trolling motor. About on average how long does a battery last say in hours on these boats?
I use a marine battery for a 30lb thrust trolling motor. Fully charged I get about 5-6 hrs, using any speed. Before I use to use a small car battery, it lasted about 2 hrs
Do you think I could coat plywood with that stuff to make a live well ???
I bet you could, this stuff is pretty amazing
What size was that can you used? Was wondering if I need to get two for my 1436 jon boat
32oz
Scrolled through your videos for a update how well did the flex seal hold up ? Long term
Howdy, still no leaks, really surprised how well it works
@@LifeWithKernelLee started redoing mine found four small cracks used marine jb weld and adding flex seal hope i have good results
@@justjeepin5168 i think that should work, keep me updated
@@LifeWithKernelLee just finished the boat waiting for it to cure I uploaded a short video on here
@@justjeepin5168 awesome ill check it out
After a few months , how is it doing? Thanks for the video!
This stuff works great, no leaks yet
Awesome! Thanks for the response. Do you think one can would work on a 1436? Painting the back and front and bottom like you did. I’d like to try with one can but tempted to order another while I’ve got all the supplies and boat flipped
@@jeremiahlavoie7998 think i would have 2 cans
@@LifeWithKernelLeehow has it held up from 2 years? I was thinking about doing mine in this flex seal
@@Blakeitrain97 still no leaks
That stuff comes off like a bad tan! Sheds everywhere
Hmm, mine hasnt yet
@@LifeWithKernelLee I also keep mine outside upside down… saw another video of a guy doing Bed liner on it might try that
@@TheBradleytv1 yeah mine is upside down as well and outside. I was thinking about that myself
All about bond it needs to be applied to clean bare metal or it peels off
Well that'll do..... lets go fishin and test it out
Lets go
@@LifeWithKernelLee I will let you know when I come to Texas. Should be going to Weatherford in October. We need to meet up 😁
What type and nap of roller did you use
@@justinschmidt9180 just a 6” thin roller
It only lasts so long once it gets scraped up on the bottom it will start peeling off
👍🏻
How’s it holding up now?
Still no leaks
Does it work on boat bottom in salt water?
I dont see why not, but dont know for sure
It’s been a year since yoh did this is it still holding up nicely j need to flex seal my John boat just want to know if it’s worth it?????
Yes, still no leaks, most definitely worth it
@@LifeWithKernelLee thank you I just got a spray can the other day and sprayed the whole bottom was worried it wasn’t going to hold up
@@markdorr6024 i dont have experience with the spray on, I chose to roll and paint it on to get a little thicker coat. Let me know how it turns out.
@@LifeWithKernelLee that’s why I’m a bit nervous i should have just got the paint can because it was ten dollars more
You could always spray more on trouble spots
Has it held up?
Yes it has, very pleased, no leaks
how is flex seal holding up
Still good
What did Donnie Baker just say his name was?
Moonpie
Today ill use a kitchen spoon to apply paint...
That should work
@@LifeWithKernelLee couldnt help myself :)
@@mjkicks2518 ha