DIY Under Seat Organizer Build
Vložit
- čas přidán 6. 09. 2024
- In this part of my truck organization project, I build an under seat organizer for my 2007 GMC Sierra Duramax Truck. This is a great DIY project that can be done in an afternoon with pretty basic tools. I used plywood for my box but it could be made of MDF or other materials.
I made mine only cover part of the floor because I usually flip the seat up to haul my electronics needed for my work .
the dimensions for the box are:
Sides 17" x 7.5" sloping down to 4"
The front is 33" x 7.5 "
I used 1/2 inch plywood so the overall depth of the box is 17.5 if you use a different thickness of of wood you may have to adjust for it if you want the same dimensions.
Materials:
1/2" sanded plywood
5-6 oz veg tanned leather
#16 7/16 upholstery nails
mahogany stain
clear coat
5/16 Threaded Rod
5/16 Washers
5/16 Jam Nuts
5/16 Cap Nuts
1 1/4" Wood Screws
Tools used:
Table Saw
Jigsaw
Drill
Impact Driver
Drill bits
Razor knife
Leather Stylus
Hammer
Thanks for watching!
Music:
Horses to Water by Topher Mohr and Alex Elena from CZcams Audio Library · bit.ly/32TUZyy
Hey Sailor by Letter Box from CZcams Audio Library · bit.ly/32TUZyy
Very glad I found this video I have plenty of wood in my little shop for this I will build one
Chevy Colorado is my work truck. I have no boxes and need a better system of organizing. Thanks for sharing good idea. Take care.
Thanks gave me some ideas for my sierra
Wow, this looks amazing! Thank you for posting this, I am planning to make one of my own and this was the extra bit of motivation needed!
Thank you so much for watching! After several months of using it was just what I needed. Best of luck to ya!
Came out really good
Thanks! pretty simple and fun. Thanks for watching!
thank you!!!! planning to make one with a middle gap for a single under seat slim subwoofer in the middle, mix of a bit of bass and storage, I cannot see that in the market
Lmao I love how much stuff you have in your back seat hilarious!
Right?! Thanks for watching!
WOW that is nice! Good job!
Good job. Good video.
Thank you so much for watching!
Hey looks great! I’m thinking of doing the same just curious if you’ve noticed any rattling or movement or if there’s anything you do differently hind sight?
So far so good. No rattle just make sure there is slight contact with the underside of the seat and it should quietly stay put. Thanks for watching and commenting!
Nice!
Thanks!
Cant figure it out how that ladder came out of the truck 🤣
Yeah, not how that wound up in there lol. Thanks for watching!