2008 Macbook Pro 15" A1286 CPU Heat Sink Replacement
Vložit
- čas přidán 28. 08. 2024
- Macbook Pro 15” 2008 (A1286) video series:
Remove bottom case (recurring for all videos)
1. Replace Battery P/N: A1281
2. Replace/Upgrade Random Access Memory (RAM) P/N: PC3-8500 1GB, 2GB, 4GB (8GB MAX)(Workaround: Any 204-Pin DDR3 SO-DIMM as long as 1 old module is left in one of the banks)
3. Replace Hard Disk Drive P/N: Any compatible SATA Drive
4. Replace DVD Super Drive P/N: 678-0612A or comparable
5. Replace Trackpad P/N: 922-9008
6. Replace Screen Assembly P/N: 661-4837
7. Replace WiFi/Bluetooth AirPort Card P/N: 661-4766
8. Replace Fans P/N: 661-4952, 922-8703, 661-4951, 922-8702
9. Replace Logic Board P/N: 661-4834, 661-5098
10. Replace CPU Heat Sink P/N: 661-4949
11. Replace Speakers P/N: 922-8700, 922-8699
12. Replace Microphone P/N: 922-8701
13. Replace Power Connector/DC-in-Board P/N: 661-4950
14. Replace Keyboard P/N: Any A1286 Keyboard 2008
15. Replace ExpressCard: 922-4953
16. Remove Mid Divider P/N: 922-8711, 922-8993
Reinstall bottom case (recurring for all videos)
You are THE BEST... AND THANK YOU SO VERY MUCH FOR THE VIDEO...
Glad to help!
Thanks
No problem :)
Thank you very much, super helpful!!!
Muchas gracias! Necesitaba esto!
Followed this to a T, wanted to clean up the MacBook and put new paste on, put back together and the MacBook will boot up but it stays on a black screen. It does flicker when I press the power button at first. I’ve tried reseating the lcd cable to no avail.
I have this Mac since 2008, do you think should I replace the thermal paste or not? Temperature in normal condition of use are about 60°