AliExpress Bottom Bracket Swap - FSA Omega to Shimano 105 Crankset
Vložit
- čas přidán 31. 07. 2024
- I wanted to switch my crankset on my Felt IA16 to 165mm cranks in Shimano 105, so I got the ZTTO BB30sh bottom bracket from AliExpress. This is a press fit and screw together bottom bracket similar to the one from Wheels Manufacturing. It was my first time removing a BB30, so I'm glad I had the Muqzi bb removal tool.
Is this a @Hambini approved bb swap??
Muqzi Bottom Bracket Removal Tool
s.click.aliexpress.com/e/_DCe...
ZTTO BB30sh
s.click.aliexpress.com/e/_DF5...
Shimano 105 Crankset
s.click.aliexpress.com/e/_Dka...
Intro 0:00
0:39 ZTTO BB30sh
0:51 Shimano 105 Hollowtech Crankset
1:06 Prepping for the BB swap
1:40 FSA Omega crankset removal
3:32 Muqzi BB removal tool
3:57 BB30 removal
11:09 ZTTO BB30sh installation
13:03 Shimano 105 crankset installation
15:21 Installation complete with a spin check
15:57 Testing the new bottom bracket and crankset
Hit that subscribe button for more content and have an awesome day!
Products that I've used:
henrychungfitness.com/shop/
Use coupon code "henrychungfitness" for a discount on your next purchase:
Zwift: www.zwift.com/invite/btmF7jKacw
santic.com/
Outdoor Master: outdoormaster.com/?ref=_CWEV_...
Souke.cc: www.souke.cc/?ref=henrychungf...
Superteam: superteamwheels.com/?ref=henr...
Trifox: www.trifoxbike.com/?ref=henry...
Duonamic: www.duonamic.com/?affiliates=53
Website: www.henrychungfitness.com
Instagram: @henrychungfitness
DISCLAIMER: This video and description may contain affiliate links which are a means to help support the channel and allows me to continue to make videos like this. As always, thanks for watching and thanks for your continued support. Until next time, have a good one!
Almost in F - Tranquillity by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
Anyone else use ZTTO ceramic bearing bottom brackets? Are they @Hambini approved?
Hambini says ceramic bearings are 💩
The ZTTO press fit hollowtech BB that screws together in the middle copied Hambini’s design solution to non-round BB shells on carbon frames.
@@iMadrid11 damnit, I should’ve checked with Hambini first 😂
@@henrychungfitness Hambini BB30 for Shimano 24mm spindle is £197. NTN ultra low friction bearings for BB30 is £27.
ZTTO bottom brackets is probably fine for recreational use. As long as you don’t expect high performance. Also if you’re fine with replacing the bearings often. Since the bearings on cheap BB don’t last.
Been running this on all my pressfit bikes. As they are threaded and its less of an inconvenience to replace. No problems since
Nice, clean install. The prequel with the crack was unnerving. Glad you got it complete the way you need. Nothing more satisfying than getting a bottom bracket replacement in.
Thanks for watching! Definitely a satisfying replacement when it works out 👌
Waxed chain ftw! Keeps everything clean. Also I agree that the tool is perfect for a home mechanic. Quite frankly we don't change bottom brackets out that often, doesn't make sense to spend $200 plus on a tool that you use only once or twice.
Waxed chain ftw!! No more greasy gunky chain marks on the hands and legs 😂 agreed, it’s actually a well designed high quality too in my opinion
Brilliant video. Thanks 👍
@@johnhatton5325 thanks for commenting and watching 👌
I’ve been looking at these bottom bracket to replace my press fit Shimano one on my MTB. From what I’ve read the bearings are okay but now you have the tools to pull the bearings and install new ones if they get chunky, the aluminum shell should be fine. Time will tell.
Agreed, atleast if the bearings are crappy then I can always replace them. At the price I paid ~$30CAD I can’t go wrong 😂
Nice. I was thinking you were going to have a much wider Q factor until I went back and saw the crank profile at 2:39
Thanks for watching! Yea I tried to match my Q factor from before to keep it consistent. Luckily I have pedal washers to adjust since this new setup is slightly narrower than the FSA crankset 👌
Have to speed to 1.75x then the speech cadence sounds normal.
1.75x speed is hilarious 😂 thanks for watching !
Zitto yikes are those parts really reliable?
Only time will tell 😂
Are Shimano's?
You would be better off with praxis bb30 to shimano bb. They use enduro bearings and spin damn well.
Thanks for the tip! I checked the pricing and it’s considerably more expensive than the $30 ZTTO bb, and I wanted to try this option out to see if it could be an economical option. Maybe one day I might upgrade the bearings 👍