Grand Marquis, Town Car, Crown Victoria, evaporator removal / replacement Part 4

Sdílet
Vložit

Komentáře • 8

  • @zacmcdonald4517
    @zacmcdonald4517 Před 2 lety

    Got a part 5? Lol
    About to do this job now

    • @TACOMASRT5
      @TACOMASRT5  Před 2 lety +3

      I'm so sorry I do not. It got dark and started to rain so I had to wrap it up.
      Take out those little screws
      Open it up, you may need a screw driver to pry, pry carefully as it is plastic, remove the old one, Incert the new one, reinstall small screws. Reinstall the unit into the car.
      It's just as tricky to reinstall as it was to remove. Careful not to break the plastic as it may be brittle, Careful not to screw up the heater core lines as they are fragile too.
      Other than that, it goes back together the way it came apart.
      Personal piece of advice from life experience. When assembling something with several nuts bolts or screws....
      #1 start all nuts, bolts, or screws by hand A. To make sure they are not cross threaded
      B. To make sure both surfaces are lined up properly.
      Hand tighten then torque to specification.

  • @miguelmaldonado9881
    @miguelmaldonado9881 Před 7 měsíci

    WE NEED PART 5 !!!!

    • @TACOMASRT5
      @TACOMASRT5  Před 7 měsíci

      Thanks so much for watching! See my reply to the message above!

  • @JohnSmith-xx1lx
    @JohnSmith-xx1lx Před rokem

    Where on Earth is the drain for this box? Having a really hard time finding it. Especially when it's on the vehicle..

    • @polymetric2614
      @polymetric2614 Před rokem

      I was wondering the same thing. I believe he shows it in part 3: czcams.com/video/h8P8XoCXyk0/video.html

    • @JohnSmith-xx1lx
      @JohnSmith-xx1lx Před rokem

      @@polymetric2614 I'm trying pausing in and zooming in I still don't see it.

    • @TACOMASRT5
      @TACOMASRT5  Před 7 měsíci

      If you pause it at 22 seconds you can see it next to my finger😊