How To Drain & Refill BMW E90 E92 GM Transmission Fluid | 328i 330i 335i
Vložit
- čas přidán 28. 08. 2023
- In today's video, I show you how to replace your BMW E90 GM Transmission Fluid using the drain and refill method. Not changing your transmission fluid at regular service intervals can lead to transmission slipping, shuddering or complete failure.
PRODUCTS USED:
AC Delco OEM Dexron-XI Transmission Fluid: amzn.to/3YYxW3m
LubeGuard ATF Protectant: amzn.to/3YZx0eP
Hand-Held Transfer Pump: amzn.to/47W9J1F
Save time and money by SUBSCRIBING for more helpful videos! 🔔
INSTAGRAM: / izzysakran
BAVMODS WEBSITE: www.bavmods.com
MY FAVORITE UPGRADES:
BMW Digital Gauge Cluster: go.www.bavmods.com/ancCXJ
Carbon Fiber Flat-Bottom Steering Wheel: go.www.bavmods.com/JZbTTB
BMW E92 Smoked LCI Taillights: go.www.bavmods.com/tpaY7a
BMW E92 Seatbelt Extender Arm Fix Hooks: go.www.bavmods.com/DfZ0Zo
BMW Carbon Fiber Paddle Shifters: go.www.bavmods.com/KhI3xM
My Exterior Modifications:
E92 M-Sport Style Bumper w/ Fog Lamps Included: amzn.to/3ySPnXg
E92 M3 Style Front Bumper w/ Braking Ram Air Ducts: UNAVAILABLE
E90 M3 Replica Front Bumper w/ Braking Ram Air Ducts: amzn.to/3vUJXrg
BMW E92 Smoked LCI Taillights: go.www.bavmods.com/tpaY7a
Gloss Black Double Slat Kidney Grilles: amzn.to/3re9ok7
CSL Style Trunk Spoiler: amzn.to/3ci0b6p
M3 Style Carbon Fiber Mirror Caps: go.www.bavmods.com/lzFMZI
Aluminum Triangle Tow Hook: go.www.bavmods.com/km7bOu
Black Sequential Turn Signal Side Markers: go.www.bavmods.com/JwnoKO
White LED Front Turn Signal/DRL Bulbs: go.www.bavmods.com/X5Gbfk
BMW E9X Aluminum Roof Racks: amzn.to/3tUNh7z
BMW Black Emblem Set: go.www.bavmods.com/2voyo9
BMW 170-Degree Reverse Camera: go.www.bavmods.com/ISRlEX
Carbon Fiber Fuel Cap: go.www.bavmods.com/1EhSTE
BMW Carbon Fiber Shark Fin Antenna: go.www.bavmods.com/vCbw78
My Interior Modifications:
BMW E9X Digital Gauge Cluster: go.www.bavmods.com/ancCXJ
Carbon Fiber Flat-Bottom Steering Wheel: go.www.bavmods.com/HQrhIr
Carbon Fiber Parking Brake Handle: go.www.bavmods.com/eSFhlS
BMW M-Performance Alacantara Shiftknob: go.www.bavmods.com/Dx0sGw
Carbon Fiber F30 Style Shiftknob: go.www.bavmods.com/EbOJvI
BMW E9X Carbon Fiber Armrest Lid: go.www.bavmods.com/YdPGwZ
BMW E90/E92 Manual Style Shiftboot: go.www.bavmods.com/Mvq8r2
Carbon Fiber Interior Door Handle: go.www.bavmods.com/Fgsjhb
White LED Interior Lighting Kit: go.www.bavmods.com/ENgtuO
License Plate Suction Cups: amzn.to/3facO55
Red Gloss Push Start button: go.www.bavmods.com/mM3zGt
BMW E90/E92 F30 Style M-Sport Pedals: go.www.bavmods.com/gMNl6L
Black BMW Steering Wheel Emblem Kit: go.www.bavmods.com/2voyo9
E90 E92 Gloss Black Push Start Button Ring: go.www.bavmods.com/d8wFiQ
E90 E92 Leather Keyfob Case: go.www.bavmods.com/I4d9YJ
Aluminum Seatbelt Buckle Chime Clip: go.www.bavmods.com/fdGHUK
BMW E9X Carbon Fiber Dashboard Panel Inserts: go.www.bavmods.com/68LkXn
Custom BMW Air Freshener: go.www.bavmods.com/8SJ7t0
Upgraded iDrive Knob: go.www.bavmods.com/yNBQ6P
My Performance Upgrades:
Solowerks S1 Coilover System (RWD): amzn.to/3s8o9rw
Megan Race-Spec Strut Bar: amzn.to/2PlnlQd
Upgraded Air Intake Inlet Silicone Hose: go.www.bavmods.com/WUyv8y
Aluminum Cylinder Head Coolant Hose Fitting: go.www.bavmods.com/alfiGm
Injen Technologies X-Pedal PRO Black Edition Throttle Controller: amzn.to/3yFSssf
BMW 328i PowerSport Drilled/Slotted Rotors and Ceramic Pads: amzn.to/3foVVCK
BMW 335i Drilled Slotted Rotors: amzn.to/3Hq0tHC
BMW E9X Air Intake Ram Air Scoops: go.www.bavmods.com/MiRkpM
StopTech Stainless Steel Brake Lines: www.fcpeuro.com
M/Sport Full Aluminum Oil Filter Cap: go.www.bavmods.com/vhBOWF
Upgraded Aluminum Oil Filler Cap: go.www.bavmods.com/Mvc1oh
Upgraded Aluminum Expansion Tank Cap: go.www.bavmods.com/MjOQKv
CSF Aluminum Radiator: amzn.to/45CIRCo
Performance Cabin Air Filters: go.www.bavmods.com/VVTXm1
My Wheel Setup:
Niche Misano 18 inch 5x120MM Rims: amzn.to/3lJALkR
5x120MM Hubcentric 15MM Wheel Spacers: amzn.to/399oXmZ
5x120MM Hubcentric 20MM Wheel Spacers: amzn.to/3f3Rv5j
My Lighting Upgrades:
DMEX D1S 6000K Cold White Xenon Bulbs: amzn.to/3cc08Zy
BMW 40W H8 360-Degree White LED Angel Eye/Halo Bulb Set: amzn.to/3Qurj4b
White LED Interior Lighting Kit: go.www.bavmods.com/ENgtuO
White LED License Plate Lights: amzn.to/3se8lSN
Black Sequential Turn Signal Side Markers: go.www.bavmods.com/JwnoKO
BMW E92 Seatbelt Extender Arm Fix Hooks:
go.www.bavmods.com/DfZ0Zo
My Diagnostics Scanner Tool:
Foxwell NT510 BMW Full Diagnostic Tool: amzn.to/3c6b0Fc - Auta a dopravní prostředky
Thanks for vid, this is the most helpful one on E92 GM ATF change, helped a lot.
Very well explained, short and informative video, thanks for sharing.
Fantastic job! I got the 578E message on my OBD2. Your video is one of the best videos I’ve seen on CZcams.
No nonsense introduction. Quick and straight to the point.
You were very thorough without being too simplistic. Lots of very good info. Thank you 👍🏿
Thank you for this comment, I’m glad I was able to help!
Awesome video! Thank you!
Thanks for this!
jus changed my transmission fluid with you’re video and i wanna say thank you because my car ride wayyy better feeling brand new
I’m genuinely happy everything went well! the car feels so much healthier with new fluid
how much dexron 6 did you buy?
@agusta5149 you’ll need 6-8 quarts
Do u know how much does the big gallon take? Should I add all
Thank you! Just did my drain & fill no filter on my 07 328i. Oil was original with 249k miles!. I used valvoline maxlife atf and now it shifts silky smooth
I’m glad to hear that brother!
is your car still running well after the drain/fill without the filter change?
@@gonecamping4007X2. How's the car running now?
@@joshb5332 my car is running well after a drain and filter change. My next time changing the oil, I will be swapping out the shift rod and valve body, just for extra precaution.
Sorry. Should you run it through the gears when its on the lift? Then top it off afterwards?
Thank u
Thanks for this informative video. I have a 2010 BMW 328xi with a GM transmission GA6-L45R as well. Would there be an issue not using the Lubeguard if I drain and fill my A/T?
It depends on your mileage and if the fluid has been serviced before. If your GM transmission is over 100K miles and you cannot confirm if the fluid has been changed before, you risk a chance of the new fluid being too viscous and causing slippage.
I’d recommend saving your old fluid in a perfectly clean container so you can re-use it worst case scenario and use a friction modifier (lubeguard or etc.) with the new fluid.
I hope this helps!
@@IzzyE9X Thanks for your input! Have a good day!
Great video! My 2009 128i has the GM Transmission as well, and the car has around 182,000 miles on it. I'm not sure if or when the transmission fluid has been changed. Should I do a drain and fill as a precautionary measure?
Yes, you definitely should. I'm sure at some stage the fluid in your transmission has been changed because I find it hard to believe the transmission has lasted this long on its original oil
@@Caleb__main Thanks!
Thank you! I would do a drain and fill, not a flush unless you are 100% sure the transmission has been serviced.
Very important Question: How much transmission fluid does the E90 Take?
I have a 2009 328i and it's running nicely with 156k miles. Thinking of changing the transmission fluid and filter. How many quarts did you use for just the flush you did? How many would I use if I changed it all?
for the GM transmission, I’d have 8-10 quarts if you do the full filter and o-rings
I got code for transmission fluid being deteriorated, do i need to do a full service as in filter/fluid change , or just drain & fill
I would recommend doing the filter as well.
for this drain and fill, is 1 liter of DEXRON enough?
no, 1 liter is not enough
Changed my ATF on my GM GA6-L45R.
What should I do if my transmission is "slipping"? 😅
In this order:
1. make sure you check you filled up with enough ATF fluid or didn’t overfill. both can cause slippage.
or
2. use a friction modifier in your transmission.
or
3. if the old fluid is still available, put it back in.
hey great video, should we put the lubeguard before or after the fluid? or somewhere in between?
its been a month, did everything go well? is there anything you would change or add to this video?
Thanks bro!
I would put it before the transmission fluid that way I can get washed around with the ATF fluid out in after. no issues since, car drives great!
@@IzzyE9X thanks for the informative video my guy. i have an 07 323. on forums its pretty 50/50 on whether people suggest changing fluid or leaving it. but im gonna change it.
@@IzzyE9X also do you think its OK with just using the old oil pan and gasket or do you suggest changing that as well?
@@HuuRsJohnny do you have the GM or ZF transmission?
@@IzzyE9X GM automatic, based on the research it says: GA6L45R transmission
I got a gear symbol on the dash and then after my bmw wasnt shifting but then i turned it off and and waited like 5 mins a it went away does this mean i need to do this and change the fluid?
You probably should! Make sure to get things like brake part cleaner, and something to measure what was taken out (you can use an old oil container, and if you don't have one, change the oil, and take the old oil to a shop to be drained but ask to keep the container)
I just had this service done buy an independent shop. Total cost was $800, labor was $495, and parts (new filter), fluid and taxes were $305.
thank you for this input! how is your transmission shifting now, is there anything you’d recommend to the rest of the community? total cost for doing it myself was about $50 in materials and then I rented the lift for another $50 so about $100 if you already own a BMW scan tool.
Great video. Wish I had a lift.
Couple things.
You didn't end up showing how much fluid your took out. Compared to how much you put in.
How much did you end up putting in?
Also. Why not change the filter s well?
Thanks for the video.
I accidentally spilled the jug, I put 7-8 quarts back in though.
@@IzzyE9X Sorry. Should you run it through the gears when its on the lift? Then top it off afterwards?
It's much easier to start with the engine and tranny cold rather than letting it cool down. Do the drain/fill, start engine and fill to drip while running. Monitor ATF temp with scan tool. Let it continue to drip while running so as the ATF expands while it heats up it will drip out the excess. It only takes about 5 minutes to heat up to 40C. When temp hits 40C, install the fill plug. I use BimmerLink phone app scan tool so I can watch temp from under the car via bluetooth OBD dongle. A pressurized fill tank allows much easier filling than a hand pump if you are lying under the car.
Just use RedLine D4 or D6, not AC/Delco plus snake oil additive. It's much better and cheaper. Use proper 6 point box wrench on fill plug, and torque the plugs properly, because you don't want them too tight next time you do this. Just remove the plastic splash shield before starting, it's only half dozen 8mm screws. Change the ATF filter every 50k miles, requires dropping the pan and new pan gasket. If you do three drain and fills with short drive between each, you get 96% new fluid, same as "flush" service. Better yet, do one drain/fill every 15k miles, that's every third oil change. Then you have like new ATF fluid at all times, not waiting for it to turn old.
You can do it in your own garage without a lift, just use ramps on the front wheels and jack stands on the rear lift points to make car level.
how much fluid did you need for a simple drain and fill?
6-8 liters to be safe
Does the Car have to be running while you pump the Fluid in the transmission?????
-pump fluid until it drips out
-bolt it up and turn on the car
-remove boot and continue filling while car is on until it drips back out
Did I miss the filter change?
Yup he forgot to it seems
he said its just a drain and fill, if it was a flush then he wouldve
@E90cart thank you 😭 I tried making it obvious I was only doing a drain and fill
If I had a car lift I would have enough knowledge to change the fluid !!! try doing a video where you are working with car ramps !!
I actually just did my e90 to this video, and I’m working with ramps, two jacks, and two jack stands. Put the front end on ramps, and jack the rear up. I used one jack per side and did them evenly until I could get stands under the rear control arms.
I’ve done this job many times on car ramps/jacks but if a lift is available it makes sense to use it @andyrcampbell
I’m glad y’all were able to get the job done yourself and not pay a shop!
@@IzzyE9X Hey if you don’t mind, I have a question myself. What to do if I don’t have a way to check the trans temp for the second add? I’m just worried I may have added too much/not enough. It’s still sitting on stand/ramps because I’m worried I have an incorrect level. Is the temp really that crucial?
Good video. I am a little confused. After first filling the transmission, did you start it up and run it (I guess you did because your gauge read 63 Celsius). Then you shut it off and let it cool to 40ish Celsius. You then turned the engine back on and top it off while it was running?
Correct!
im doing the same job. just so you know. always lose the plugs before you do anything. in his video he did not open and losen the fill plug before he drains. many people arent able to open the fill plug and it is seized so much you are stripping the hex bolt. then u are fked as you cant fill the tranny up and fluid is all empty. and they are aluminum so easy to strip. always losen them first before draining
@@IzzyE9Xnow my 17 mm wrench the round end is starting to strip the corner of the fill plug hex bolt. what do i do😢😢😢
Thanks. I’ll also be sure to loosen the filler bolt first before the drain plug.
@@YorumiTech he literally said to do that in the beginning?
Note to others who watch this video. 1. Go ahead and remove the skid pan from the transmssion right up front. Don't fight around it, because you WILL be removing it anyway...BECAUSE 2.) I strongly recommend that you drop the transmission pan, replace the filter and clean the pan of sludge while you're at it. It is not that much more work. The fellow in this video has a lift, for heaven's sake! You are that close alreay. 3.) Use a torque wrench when replacing all pan bolts, fill bolt and drain bolt. 4.) Add anti-sieze to drain and fill, to make it easier for the next guy. 5.) Write the mileage at the change on the pan bottom in Sharpie for the same reason.
I explained the purpose of why I only replaced the fluid and not the filter at the beginning of the video.
@@IzzyE9Xdoing the filter changed like 1 more quart of fluid. Plus the filter is probably full of crap
Why did you not change the filter?
If you are unsure of the transmission health (example a used car) and you replace the fluid and filter, you risk shocking the entire system. drain and fills are done to put new fluid in, but also gauge the transmission health. If your car drives fine after a drain and fill, it basically tells you “okay, the transmission is in good internal shape. now I’ll do the filter and fluid again” rather than “my transmission is slipping”
@@IzzyE9Xbut the filter is not exactly a shock, it’s the same fluid of a drain and fill just with better filtering properties, where exactly is the shock compared to as you correctly say, doing a full flush?
Lol bullshit, swap the filter out; what does “shocking the system mean”? There is no shocking, u just wasted 6.3L of fresh tranny fluid
took mine to a shop and now its making a gurgling noise at start and winding grinding noise is my filter clogged? could someone help i have a vid czcams.com/users/shortsyzNrflRcHhs?si=0MaOtXISWxKc7ACM
Inside the transmission there is also a filter and some orings which need to be replaced... So you did only about 70%
yes I didn’t do the transmission filter on purpose, it’s addressed in the video
There is no way that fluid did 120,000 miles. It must have been serviced previously.
An Allen key are you serious? No you need a 5mm Allen SOCKET with a breaker bar anything else is stupid.
I have a 1/2 hex key socket set, however he got the plug out with the regular key and was careful how he did it. A T60 torx bit with a breaker bar would be a must on your drive belt tensioner.
Who cares..dosent matter either way.
He got the job done smooth and easy yet you still complain
Yeah. I giggled when I seen that. Straight out of grandmas roadside emergency toolkit. Good way to strip out a hex hole. I certainly don't want that stripped out. Step 2 is to hammer on a torq socket if that happens.
Good thing i got a tool box then 😂😂
Yeah, you rigged it. You should’ve dropped the whole pan. Took the filter off. Put a new filter on then refilled it.