Henry Hoover Hose Keeps Coming Off? Repair Henry’s Hose in 2 Minutes

When your Henry Hoover Hose keeps coming off your vacuum it can be frustrating to say the least. There he is peering around the door frame, watching you trying to vacuum without a hose attached.
Your first thought might be that you need to buy a new Henry Hose, But 90% of the time there is no need.
This is a quick guide How to Reattach Your Henry Hoover Hose when it keeps coming off.
(we also have a guide how to replace Henry cuff on your hose if it's the other end that keeps coming off the metal pipes)
How to repair your Henry Hoover Hose
There is a video at the bottom of the page that will also talk your through these steps.
1. Unscrew the Machine End Hose Connector from your Henry
2. Clean any excess glue off the connector and the hose (you don't have to go mad, as long as its free from bits that are hanging off)
3. (Optional and by no means necessary) Put a very small amount of glue on the inside thread of the connector that the hose goes into.
4. Screw the hose ANTI-CLOCKWISE into the connector, as tight as you can. The natural thing will be to try and screw it the opposite way which will not work!
5. Make sure that the connector is swiveling on the end of the hose and then screw the connector back onto your Henry.
Done! A simple repair that will last.... and not a single roll of gaffer tape in sight.
I do hope that this has helped you and please see our other help pages for other Henry Hoover Repairs
If this video has helped you, please comment.
My videos are to help people save time and usually money. I’ve been asked about how people can make a donation to say thank you. I don’t do this.
Instead please save my site henrybags.co.uk
The next time you need any bags or parts for your vacuum, please use the site to buy them. We are a family business who are always here to help.