Thanks for the review. Really enjoyed where you showed where the stabilizing arm attached to the bottom of the drill. That was having a hard time finding it and you made it easy. Many thanks
Yeah, anything you can attach them to and has enough torque, most handy dudes will find a way to fit them, I used mine with a off-brand drill sold by aldi here in Australia and it worked well till the blades wore out.
Hello! I recently bought this shear tools and i've noticed that the upper part of the blade (the ne that swivels up & down) it's a little loose (has a little play when it's not used). it's normal or it's something broken or untighten inside? can you please confirm if yours it's the same please? thank man!
Would this be able to flush cut up against an inside frame? I'm putting metal siding on a building and need to cut out the doors and windows that are already framed. I want to just sheet the whole wall and then cut out the the openings, like we do with a router on wood sheathing. Can it cut flush against one side?
If that thickness is less than 16 ga strap (is the thickest metal I've cut) then yes it should work but you might want a double cut shear if you need both sides of the cut to be FLAT straight edges.
@@toolrev have you ever tried it on cement sheets aswel, because the tool you use might actually go good on cement sheets regardless if the blades can cut through steel.
you can get every part for almost every dewalt tool at their parts website - here the link for this tool -www.toolservicenet.com/dewalt/en//Dewalt/OUTDOOR//p/DCPR320B
Thickest I've cut is 16GA strap so whatever mm that is is all I can say. I'd get it, try it, return it if it doesn't work and then come back and let us all know.
Finally, a short to-the-point video. Thanks!
Thanks for a quick, easy, and no-nonsense review!!
Thanks for watching!
Just got one yesterday! As an HVAC installer I think I'm really gonna like this!!! Thanks for the tutorial very informative!
You bet! 👊
Thanks for the review. Really enjoyed where you showed where the stabilizing arm attached to the bottom of the drill. That was having a hard time finding it and you made it easy. Many thanks
Simple, quick ,nice review. I just picked one up for my occasional use... much better than using hand snips for long cuts.
nice! you answered my question after searching through other reviews, This can cut 16 gauge coil straps. THxx!!
Cool, I was hoping someone would be able to use that info.
Great review, lots of info, exactly what I needed to know. Thanks!
Great review. Awesome video examples of the different applications
I bought one and it works on ryobi drills
brief and explicit review!👍💪👏thanks
Awesome review
Does this work on corrugated iron?
Haven’t tied it but let us know if you do and how it works.
Clear and quick. Thanks!
You're welcome!
Wonder if we can use it on normal drills, like dewalt 12v drill or Milwalkee drill
Yeah, anything you can attach them to and has enough torque, most handy dudes will find a way to fit them, I used mine with a off-brand drill sold by aldi here in Australia and it worked well till the blades wore out.
Thank you!
Ever try this out on thinner titanium sheets by chance? .5mm or 1mm gr5. I'm guessing the .5 would work, but unsure of the 1mm.
I haven't.
What is the attachment in the very begining that you used to make the original hole? What's it called?
It's called a step drill bit. This one's a Milwuakee 3/16" to 7/8" with a 1/2" shank. You can also get them with a 1/4" shank for impact drivers.
This accessory is compatible with which drills?
Thanks great video
Wore my blades out, where do you buy replacements? ... nothing online!
Does it work well with wire mesh?
Haven't tried it but I'd guess yes.
Can this be reliable for cutting copper
never tried it myself
Could you use this above a fuel tank? No sparks? Need to put an access panel in a vw bus.
I haven't seen sparks but who knows.
Hello! I recently bought this shear tools and i've noticed that the upper part of the blade (the ne that swivels up & down) it's a little loose (has a little play when it's not used). it's normal or it's something broken or untighten inside? can you please confirm if yours it's the same please? thank man!
yes mine also has some play
Would this be able to flush cut up against an inside frame? I'm putting metal siding on a building and need to cut out the doors and windows that are already framed. I want to just sheet the whole wall and then cut out the the openings, like we do with a router on wood sheathing. Can it cut flush against one side?
Probably not like routing out windows and door openings but let us know what happens if you try it.
Will this cut diamond plate sheet ? .058 I believe. Diamond sheet that you can buy in Home Depot
If that thickness is less than 16 ga strap (is the thickest metal I've cut) then yes it should work but you might want a double cut shear if you need both sides of the cut to be FLAT straight edges.
Hi I'm wondering if these can be used with cement sheets as I have all my tools dewalt and don't really want to change or get the makita cement shears
Not sure.
@@toolrev have you ever tried it on cement sheets aswel, because the tool you use might actually go good on cement sheets regardless if the blades can cut through steel.
@@Canipeks I haven't tried it but if you do let us know how it works out.
@@toolrev I haven't got one of these tools, however if I buy one and try it will definitely keep you updated.
Can you get replacement blades
you can get every part for almost every dewalt tool at their parts website - here the link for this tool -www.toolservicenet.com/dewalt/en//Dewalt/OUTDOOR//p/DCPR320B
if they made one of these that was a double cut I would buy one to day
Can it cut steel sheets? Maybe 1mm?
Thickest I've cut is 16GA strap so whatever mm that is is all I can say. I'd get it, try it, return it if it doesn't work and then come back and let us all know.
That’s awesome
Rediyl tyre katne wala masin chahiye
Wait its supposed to be on the base Shit Bro told me to cut metal and the stabilizer leg was on the back of the drill😂
Rediyl tyre katne wala koi masin hai
Doesn't fit my Ridgid drills
Phon number dijiye