Lian Li O11 Dynamic EVO RGB Build - Step by Step Guide
Vložit
- čas přidán 15. 06. 2024
- A full step by step guide to building a PC in the Lian Li O11 Dynamic EVO RGB. This guide assumes no previous knowledge and is perfect for a first time PC builder. Links to parts used in the build are below.
Preparing the Case
00:00 The Parts
01:49 Panel Removal
03:16 Front IO Module
07:25 Removing the Front Pillar
07:49 Fan and Radiator Support
12:11 Motherboard
14:33 GPU Support Bracket
17:33 Vertical GPU
20:12 Upright GPU
24:39 Drive Mounting
27:15 Cable Management
28:23 Power Supply
29:25 Reverse Mode
The Build
33:07 CPU Installation
33:38 M.2 SSD Installation
34:07 RAM Installation
34:26 Motherboard Installation
34:48 Case Cable Installation
35:46 Power Supply Installation
37:23 CPU Cooler Installation
41:30 Case Fan Installation
47:46 Graphics Card Installation
48:24 Cable Management
48:52 Complete Build Footage
49:57 Setting up the PC
52:05 Setting the UNI FAN TL LCD
1:00:28 Case ARGB Demo
Parts used in the build (Amazon links are Affiliates Links)
• Lian Li O11 Dynamic EVO RGB
UK - www.overclockers.co.uk/lp/lia...
US - www.newegg.com/p/2AM-000Z-000C0
CA - COMING SOON
• ASUS ROG STRIX X670E-E GAMING WIFI
UK - amzn.to/3RLlVcj
US - amzn.to/3rEhhC5
CA - amzn.to/3HZJ74T
• AMD Ryzen 7 7800X3D
UK - amzn.to/3NzcT2R
US - amzn.to/3T3KMME
CA - amzn.to/3T6tOx6
• Lian Li Galahad II Trinity Performance 360
UK - www.overclockers.co.uk/lian-l...
US - amzn.to/4633sip
CA - amzn.to/3SsKCOK
• TEAMGROUP T-Force Delta RGB DDR5 32GB Kit (2x16GB) 6000MHz FF3D532G6000HC30DC01
UK - amzn.to/3REE7aW
US - amzn.to/46pnK6q
CA - amzn.to/48uvaXE
• ADATA LEGEND 970 1TB
UK - amzn.to/40LsOQQ
US - amzn.to/3utp1eM
CA - amzn.to/3G5v0Jh
• Phanteks Revolt 1000W 80 PLUS Platinum ATX 3.0 Power Supply
UK - amzn.to/45zCoa5
US - www.newegg.com/phanteks-revol...
CA - amzn.to/3LUaPBl
• Phanteks Revolt Cable Kit, Complete Set, Black
UK - www.overclockers.co.uk/phante...
US - amzn.to/46tIoCA
CA - amzn.to/3rLEgir
• ASUS ROG STRIX RTX 4080
UK - amzn.to/3N8sOFo
US - amzn.to/3Nl0bFf
CA - amzn.to/3P1PMz8
• Lian Li Uni Fans TL 120 Reverse Blade - Triple Fan Pack
UK - www.overclockers.co.uk/lian-l...
US - www.newegg.com/p/1YF-005G-000D4
CA - COMING SOON
• Lian Li Uni Fans TL LCD 120 Reverse Blade - Single Fan
UK - www.overclockers.co.uk/lian-l...
US - www.newegg.com/p/1YF-005G-000D2
CA - COMING SOON
• Lian Li Uni Fans TL LCD 120 - Single Fan
UK - www.overclockers.co.uk/lian-l...
US - www.newegg.com/p/N82E16835353031
CA - COMING SOON
• Gelid Solutions GC-Extreme Thermal Paste
UK - amzn.to/3tzlnwT
US - amzn.to/3mM8Sdm
CA - amzn.to/3xp1n0Z
• Maidesite Standing Desk S2 Pro Plus - shrsl.com/3wwme
Affiliate links
I am part of the Amazon associates program, this means I get a small commission when you buy through these referral links.
More photographs of the build can be seen at pcpartpicker.com/b/rwnLrH a time-lapse of the build can be seen at • Lian Li O11 Dynamic EV... and the case review at • Lian Li O11 Dynamic EV...
Useful Links
• How to make a Windows 11 Bootable USB - • How to Make a Windows ...
• How to Build a PC - Step by Step Beginners Guide - • How to Build a PC - St...
• Motherboard Drivers - rog.asus.com/motherboards/rog...
• Motherboard Overview - • ASUS ROG STRIX X670E-E...
• NVIDIA GeForce Experience - www.nvidia.com/en-gb/geforce/...
• Armoury Crate - www.asus.com/motherboards-com...
• Lian Li L-Connect3 - lian-li.com/l-connect3/
• Lian Li Galahad II Trinity Performance Review & Installation Guide - • Lian Li Galahad II Tri...
• Lian Li O11 Dynamic EVO - Best Fan Configuration - • Lian Li O11 Dynamic EV...
Music
Arcadewave - LUPUS NOCTE
www.epidemicsound.com/track/e...
Dream Caster - LUPUS NOCTE www.epidemicsound.com/track/H...
#pcbuild #lianli #gamingpc #buildcomputers #tutorial #beginnersguide #buildingpc #electronics #personalcomputer #budgetgamingpc #budgetpc - Věda a technologie
When he casually said, "The added rgb on the top and bottom, which will definitely guarantee you a few extra frames per second." I legit choked on my coffee.
Never built a pc in my life. 2 videos from your channel was more than enough for my build. No one explains everything like you. Thank you.
Man you are the absolute GOAT when it comes to pc build guides. You are the reason I was able to build my first computer ! Cheers from Brazil
Your videos are excellent, thorough beyond belief, and have helped me with multiple builds now. The extra features in this case really show Lian Li's commitment to thinking about what would improve the build experience and is by far and away the best design improvements from the already excellent O11 -> Evo -> Evo RGB (I have built in the first two and can't wait to do my next build in this rig, or maybe an O11 Vision RGB if/when that comes out!)
Chris, without you i would not have the motivation to build a pc. Im saving now to buy some day and i will use your videos as a guide. You are really the best at what you do. i never seen someone explain all so detailed like you do.
The best PC build guide channel on CZcams. I had my 3rd try recently at building a PC in a white NV5 for my girlfriend recently and couldn’t have done it without being able to refer to your videos! I have the O11 Dynamic Evo but this RGB version and the new fans are absolutely stunning
Thank you so much for this well detailed case review and assembly. I really appreciate that you went through all the details of the case and even assembled a full setup while going over where all the plugs go such as usb headers and more. It can be a little overwhelming being new to pc building but you've pretty much answered all my questions with wiring and setting up in this case with one video. I'm more confident to build my new pc once the rest of my parts arrive. Thank you so much 🙏
Christofer thank you so so much! I built my first ever pc based of this video a week ago, I had a lot of similar parts, and the way you explain things is just awesome.
Another great build and guide. Appreciate all the videos throughout the year Christopher 👏👏👏
Thanks
Appreciate the great video. This case and fans are at the top of my wishlist.
Evo RGB > Vision
i have been bulding/working on my pc for 3d now and your video was my savior really id be so lost without it, at so many steps hardware or software wise, thank you a lot for this video, truly! was able to build all and synch the rgbs welly the result is amazing
That's the Best Case I've seen....Nice !
It's really good
I don't think there's anyone who does it better. Class 🔥🔥
Thank you, been looking forward to your video on this case. Also looking forward to your video on the Phanteks NV9. I base my buying decisions on your videos so no pressure 😊
Have to see if Phanteks send one, I'm not chasing one, enjoying a well earned break after this one
This case is awesome. Your guide was very helpful as i wanted to build something similar. Thanks !
Thanks for the video, this is really what I need now.
Thank you so much I'm building pretty much the same build but intel and this video helped me sooooo much what a legend
oh baby!! that just means the o11 mini variant is around the corner. cant wait!
Absolutely love this build my case is coming in tomorrow. I cannot wait to build this BADBOY!
just wish you had the brackets for vertical mount or horizontal mount for the gpu
This is a really nice looking build.
This man is legendary
I could't figure how to get into the pure color mode thanks so much!
Merry Christmas!
Very Informative...!! Well Done... :)
I see we did cable management exactly the same :D , I have the white version of the case, it's absolutely beautiful!
Amazing and well detailed guide. I’ve built many pcs throughout the years but being able to follow a step by step guide is always the easiest for me.
I’ve only a question: I’m having a really hard time putting the bottom fan brackets in the bottom of the case after screwing the three fans. Doing it with the motherboard in the bottom position was basically impossible because there was such a small clearance from the fans and the connectors on the bottom of the motherboard.
Now I moved the motherboard in the upper position but still having hard time to fit the damn bracket in the bottom… in the video at 47:15 you do it effortlessly, and even with the motherboard in the lower position…
What am I doing wrong?
I double checked and the orientation of the bracket is correct.
Very good video, helped me a lot. Which electric screwdriver do you use?
Awsome! It would be great if Lian Li made an Evo RGB version os O11 Dynamic Mini. That case really needs an upgrade.
Thanks for the video
At 12:44, he mentions that the stand-off removal tool is in the "case accessory box," which had me confused for a while because I couldn't locate one. I eventually found it inside the GPU anti-sag kit box inside that's inside the case accessory box.
I just bought the EVO XL version. Could you consider doing a step by step guide for the Lian li O11 EVO XL in Reverse mode (just like you did for the original EVO)? or maybe the best fan config for the reversed case.
It's really interesting that this case is actually functionally very different from the vision. I thought that the the RGB and vision would have little differences.
Good to have choice
I love the reverse mode, didn't get the need for it though. Have my case on my left at the moment, looking into the case, as it is angled like 45deg... sure, cables need to be a bit longer but beside that...
Thanks for your absolutely amazing Videos. I have watched the videos about the O11D Evo and Evo RGB. In this video, you use a ROG STRIX 4080 in an upright position in the RGB case. My question is: can the Lian Li O11 Dynamic EVO RGB hold a ROG STRIX 4080 upright when the case is reverted? Thanks!
Does it matter which direction the IO's on the Strix face for temp reasons? I can only find conflicting information about the vapor chamber and the whether the IO's should be up or down. I noticed yours is up and another video I have watched they put it down. Awesome video by the way, putting my first build in 12 years together right now!
Christopher: Perhaps I missed this answer in a previous video. If so, my apologies. Do you design the fan supply/exhaust configuration, including the radiator fans, to provide postiive pressure within the case to minimize dust collection? Want to build a PC for Flight Simulatior and enjoy your videos. Thank you for NY, US.
Just about to pull the trigger on a build similar to this in an Evo RGB, 14900k with the Galahad II LCD SL-INF 360mm Performance. My fan selection is identical otherwise with triple pack TL LCD 120's reverse flow, triple pack TL 120's reverse flow and a single TL LCD 120. Am I right in thinking that I only need two USB 2.0 headers on my motherboard for this configuration? One for the UNIFAN controller and one for the Case RGB? Many thanks. Also, as a side question - are you satisfied with leaving all control of pumps and fans in L-Connect 3 or should I do it differently? Super helpful video and a thumbs up from me.
At 20:00 I'm surprised you didn't address the gpu sagging and how to adjust the gpu adapter to fit the card.
In reverse mode did the glass panels meetup properly in the corner ? Another CZcamsrs review case the panels left a gap in reverse mode only and wondered if that was a 1 off.
Looking for the reverse build aesthetic, heard that there’s a gap between the glass panels when the bracket or beam is removed.
If you plan on doing a video with the reverse build soon lmk! I need the help
Can I connect the fans of the old version of Lianli with the modern version in a consistent manner and with a uniform application?
best of the best
Is the radiator mounting bracket supposed to be included with the AIO? Do some AIOs not come with a bracket? Asking cus mine didn't
It is also possible to use the Top I/O-Panel Kit for the O11D RGB Case?
will i be able to use a corsair shift psu in this case and keep the harddrive cage?
Pre ordered my case, any idea when they release UK?
so recently i bought this case and no matter what ive done i can not get the rgb strips to turn on at all is there anything i may be missing? i did the sata connection and the rgb connector on the bottom of the mb! thanks in advance!!!
Can I ask you why you didn't prefer to put the motherboard in the high position? :) Thank you
What is the electric screwdriver that you are using? I have been thinking of getting one.
Does Lian li 011 Dynamic Evo RGB (Black case) have tinted glasses?
I have this Evo RGB case and TL / TL LCD fans, but I can't control all devices with L-Connect because there's no way to connect the case to Lian Li TL hub. The only way I could set it up is by controlling rgb through the motherboard and using a third-party software like SignalRgb. Besides it doesn't have full support to tl hub, it works. How do you control your rgb devices?
Your videos are brilliant and this one's no different, thank you for your thorough explanations.
Quick question tho, would a 7800x3d be good for a pc more used for productivity/workstation stuff? And would it pair with an rtx4070?
I have always had intel (prebuild), but I don't like them retiring the LGA1700 so fast and I want my first build to be a bit more futureproof
A month late, but intel is by far superior for any productivity/work and decent for gaming on the side. If your a hardcore gamer than AMD is superior. And as far as futureproofing if you buy the best of either it usually always last the longest.
@@vsynccx4263No worries, thank you for your reaction! This helps with my decision, I'm probably gonna go with either i7 13700 or 14700, whichever I can find the best deal on :)
@@JustCarnivorousCupcake Yeah, those cpus are really good regardless of what you do. 13th gen is dead though, so down the road you won't be able to upgrade
Question. When i try to play some gifs or mp4s on the fans with lcd i got really bad "fps drops". it doenst look smooth. any idea why?
This seems like a very well built case, for the people who've been able to get there's assembled. But the variations in these cases in combination with the catastrophically written "instructions", make trying to understand how these units fundamentally go together, excruciating (at least in my case). *I watched the build you did with the white case that had the exact same model name as mine, and I didn't have the parts you had (i.e. vertical GPU parts, and fan adapter rails). Do I have an updated version??? If so, where do I find that, so I can watch an appropriate video? Like I said, the instructions are all but worthless, making this EXTREMTELY confusing.* I could slop this together, and put screws where they seem to fit, but I'd like to assemble this the way they designed it, to get the most out of it. I'm anxious to hear your thoughts on this... For what it's worth, your videos are excellent, and obviously needed given the number of views you've gotten... They strangely just don't seem to apply to my model which, again, is the exact same (at least by name).
Can you make a build on the LIAN LI V3000 case?
Awesome video, but I think I would move the motherboard up one step I think 🤔
one question do i need the one single fan in reverse or normal if i want to blow air out?
Excellent quality and very clerarly explained what is being done.
Talking could be little slower... also white table is not the best background when showing components and parts because it blasts across the screen whoever is watching the video.
Can i build a pc with 8 uni fans and a lt720 with only 1 argb slot on my board?
How is the performance of the GPU upright? Any issues?
just finished identical build. and ive ran out of usb headers on my MB :( . 1 for the case rgb, which leaves 1 to run AIO and 4 more fans. I dont know how u did it.
42:30 what's the name of this exact fan connector? really need to replace it
@christopher flannigan - Upright GPU okay for temps?
I can no longer control the two led strips of the falls via the buttons. Did it happen to someone else? How do I solve it? Thank you
Can this case be inverted like the normal evo?
Do you think the Arctic Freezer 420 AIO would fit in the top of this case using the provided brackets?
This is what I want to know. I did wonder why he didn’t continue the build with a 420 radiator in as it’s one of this cases unique selling points.
I just got the same case would you recommend all reverse fans or mixed? I'm a bit stuck on which to get I'm getting these fans too
Just get reverse blade for the 3 that go vertically and the rest the same
How are the lian li fans vs noctua nf-A12?
Which chipset version to choose? From Asus or straight from AMD. Asus is newer?
What a gorgeous build! Shame about the riser color, it would be a total knockout with the red/blue on the front of the ROG card visible.
That was the plan, gutted when I opened the box
Can someone please help me? I’m new to pc building and bought this case and a deepcool sc790 argb and fan hub. Can I control the led stripes via this hub with my aorus mobo/ gigabyte software? :)
Do you prefer the XL or the new RGB?
So this is just a 011D Evo refresh, with rgb and 140mm fans?
Does anyone have the link to the reverse mode? I don't think he linked it.
Man the way u said it will definately garantuee few frames per second with a stright face killed me 😂😂😂
my o11 dynamic evo has different inner workings than the video, why?
I'd like to see the phanteks NV9
Problem is these new O11's keep getting wider; dynamic=272, evo=285, RGB=290, Vision=304mm. I need a new case for 4090 my icue 465x with front rad wont do it but i like the case and its 216mm wide.
would the DeepCool AK620 fit in this Case?
Yes
Hello, does anyone managed to control case rgb via a software?
I can’t seem to close the side glass panel on this case, anyone else having that issue?
How do you only have 80k followers, wtf
Add a few extra fps due to the rgb 😂
Known FACTS 💯
See it's not just me who knows about this
GPU manufacturers hate this one simple trick
At least another 1-2fps garunteed. 😂
Like how adding an exhaust tip gets you 1hp
In almost every build with this case the lower position is used. They squeeze the bottom fans in and have a lot of space at the top. Weird...
@ 7:49
the top and bottom do support 3x 140 fans
the side does not
just learned that the hard way today
It doesn't fit fit. Or most of the screws dont fit? And which fans are you using? On the lian li site it says it only supports 140mm uni fans. Been thinking about buying this case. But with p14 argb since its 3x cheaper.
@@bonito_1196 triple 140 fans fit in the side panel, but don't fit in the GAP where it's supposed to go back into
Those fans are beautiful but with one costing 50 bucks, a single exhaust at the back would be fine. The build will also will look cleaner.
2 looks great in the vision
Hello everyone..
I started building a computer but ran into a problem, if you can call it that...
I have a Lian Li O11 Dynamic EVO RGB CASE and Lian Li UNI FAN SL-INF 140mm
I have a technical question regarding the installation of 3 X 140mm fans which are on the front, i.e. to the right of the motherboard...I can't screw more than 8 screws there because the upright bracket is a bit short. ..On the first and last fan, the upper screws, which are 2 each, have nowhere to screw....The fans
I watched a video in which 3 fans of 120 mm fit perfectly and all 12 screws are screwed to them... But for 3 fans of 140 mm something is not right...
Does anyone know where I'm going wrong?
If you're using the 140mm UNI fans, you can skip the top and bottom mounting screws.
Nice case. It's a shame they cost the earth compared to non fish tank style which usually comes with fans included. Compare the cost of this case with 10 fans compared to a lancool 3. Huge difference in price.
Super:))++
With that mobo, what are your boot times?
Faster than those on the AM5 with fast boot disabled due to issues no doubt 🤣
I haven't timed them, but they seem average
Why 120 and not 140 mm fans ?
Why it looks by you so dark inside and like dark tinted glass by Lian Li O11D EVO RGB and by other youtuber it looks clear, exacltry same new Lian Li O11D EVO RGB in black.
Just watch on youtube...on the homepage from Lian LI exist only one black RGB version of Evo with tinted glass...where to find with clear glass?
How is the glass to gpu clearance? I have the OG O11D and with the Asrock Taichi 7900xtx with Cablemod Pro cables I have to use the vertical GPU mount b/c there is no clearance, I was looking to go back to the horizontal gpu look.
I think they should have added fans to it not the strip lol.
yes, but the water cooler is in the other way, omg......
Again no good spot to place a controller like Corsair's... Damn.
Just some constructive criticism, sometimes you talk very loud at first then gradually your voice gets so soft that its hard to hear anymore especially on times where you eat your words. Then your voice gets very loud again then the volume goes soft then you eat your words again. Its a bit hard to understand your words during these times. Thanks for the video though. Cheers!
I don't get it why you build such a beast and then save money on the SSD. This build needs at least another 2TB SSD.
Great video Chris. I am building this PC over the next few days with very similar spec. I assume you did not use the second front IO as the MB has no connectors for it?