Good Job, Im new in this and your videos are very helpful. Now I have one Dixie one Royal one Automatic Products. 3 of them are very old. But got them work good. :)
@Happy Vending Thank you so much for this Video, it is beneficial, especially for me who is bout to get my first vending machine however I want to change the graphic.
I got our graphics from NBS: www.nbsinc.net/ It cost around 600 to get side and front graphics for 2 vending machines....so around 300 per machine. They were custom graphics so we needed to pay setup charges for the printing. The company also sells generic designs for machines...so those are probably cheaper. Check out their website and request a quote.
Spray the machine and the fully peeled decal with mild soapy water then throw it on slip slide it into position and squeegee from centre out . Easier, Faster Best, Result 1000ML warm water to 5ML dishsoap in spray bottle
It is not recommended because any damage to the side decals would cause the new decal to not stick right. Also, it would be hard to line up the new decal to cover the old one completely. It is best to just remove it.
@@HappyVending Thankyou, i did also try looking in the manual online but also couldnt find the information. (i just want a free vend one for my home🤣) but at nearly at 40c per kwh it might not be the best idea for me. Just watched several of your helpful videos and learnt so much. Thanks again.
When installing slide the panel in the rails to the right, and bend the right top in the rail then the left side. Bending is a little hard until you get the hang of it. Don’t worry about breaking when bending it because it takes a lot too!
@@HappyVending No sir, you just have to bend it and let it slide into the rails. It’s not hard but feels like it’s going to break but they are very flexible.
I got our graphics from NBS: www.nbsinc.net/ It cost around 600 to get side and front graphics for 2 vending machines....so around 300 per machine. They were custom graphics so we needed to pay setup charges for the printing.
@@HappyVending that’s a site I’ve been so hard trying to find. I’m looking into having all of my machines totally customized instead of old decals and wraps. Of course that’s going to be a bit of a time process lol
I got our graphics from NBS: www.nbsinc.net/ It cost around 600 to get side and front graphics for 2 vending machines....so around 300 per machine. They were custom graphics so we needed to pay setup charges for the printing. The company also sells generic designs for machines...so those are probably cheaper. Check out their website and request a quote.
Bill using a machete lol
Dude you literally have one of my absolute favorite intros. 👍👍
Videos like these reach a lot of people to be honest
This the only video on CZcams… thank god you made this… SUPER helpful 👍🏾💯
Not gonna lie... The machete caught me off guard
Imagine walking into your high school and seeing your English teacher with a machete…. Yeah no questions lol
lol. I did this during the weekend...no students were there.
Good Job, Im new in this and your videos are very helpful. Now I have one Dixie one Royal one Automatic Products. 3 of them are very old. But got them work good. :)
@Happy Vending Thank you so much for this Video, it is beneficial, especially for me who is bout to get my first vending machine however I want to change the graphic.
Thanks, great video. I’ll need to do this on a much older machine
Holy crap!
First time I’ve heard someone say
Dee-Cal
Instead of
Deck-ul
And saying it like dee-cal is the more common way!! That’s insane!
good video!!!. these videos are helping me a lot. greetings
casual machette
for the small air pockets poke with a needle then flatten out.
Thanks....I did use a needle for some of the air bubble. I also poked some with an exacto knife.
great video! where did you get the custom vinyl siding made?
I got our graphics from NBS: www.nbsinc.net/
Awesome work Bill
19:40 Mr. Cherkasky? lol.
I teach at the school...hence, the "Mr."
Roughly what is the cost for a new front like that custom or factory, Cold Drink fronts? For say a 660 like that one
I got our graphics from NBS: www.nbsinc.net/
It cost around 600 to get side and front graphics for 2 vending machines....so around 300 per machine. They were custom graphics so we needed to pay setup charges for the printing. The company also sells generic designs for machines...so those are probably cheaper. Check out their website and request a quote.
@@HappyVending that's not bad
looks good 👍
Spray the machine and the fully peeled decal with mild soapy water then throw it on slip slide it into position and squeegee from centre out .
Easier, Faster Best, Result
1000ML warm water to 5ML dishsoap in spray bottle
A bottle of application fluid would make your life much easier.
If I had to do it again, I would probably go that route.
I have to replace the front on our Royal 660 soon. Thanks for the explanation.
Good luck!
@@jeremybowen3097
For the sides could you just cover them rather than removing them?
It is not recommended because any damage to the side decals would cause the new decal to not stick right. Also, it would be hard to line up the new decal to cover the old one completely. It is best to just remove it.
Can someone please turn on the Lights
How were you able to get the dimensions printed
NBS: www.nbsinc.net/ has the dimensions of most common machines on file. You just tell them the model and serial number of your machine.
Hi, like what you did with the vending machine. Where did you get the three Christmas tree inserts for the front of the the display
?
I ordered them from Royal.
@@HappyVending thanks I appreciate it. How much was it and can I do this with a royal 660?
@@marcusgraham8931 600 for the front and side graphics...and yes, you can do it on a 660.
@@HappyVending nice thank you. How much was the Christmas trees and whats the website?
@@marcusgraham8931 Royal Vendors: 1.800.321.8637. The trees only cost a couple dollars...the shipping will be more expensive than the parts.
Man is there any way to avoid taking out the entire front? I much rather just place something right over it
You can't do that because you would see the old graphic when the lights are on.
What is the power consumption on a machine like this?
I'm not 100 percent sure because it doesn't state that in the manual, but it's probably around 12 kWh per day.
@@HappyVending Thankyou, i did also try looking in the manual online but also couldnt find the information. (i just want a free vend one for my home🤣) but at nearly at 40c per kwh it might not be the best idea for me. Just watched several of your helpful videos and learnt so much. Thanks again.
@@itsJENmofo Yeah, it would probably be best to just buy a small fridge for your garage.
Where did you get the side graphics made
I got our graphics from NBS: www.nbsinc.net/
I just got a 7up machine but wanna change the graphics
Yeah...not many people buy 7uo products so i wojld probably change it too. I typically loom for coke graphics when buying a machine.
why no power nut driver ?
I guess I should get one...lol.
Good job but there’s a easy way, I work for coke and change these out daily!
What's your secret?
When installing slide the panel in the rails to the right, and bend the right top in the rail then the left side. Bending is a little hard until you get the hang of it. Don’t worry about breaking when bending it because it takes a lot too!
@@blackghostlsx7808 So are you saying you don't take the top rail off completely?
@@HappyVending No sir, you just have to bend it and let it slide into the rails. It’s not hard but feels like it’s going to break but they are very flexible.
@@blackghostlsx7808 Do you even loosen the nuts on the rails? If you don't even loosen the rails I would have to see it to believe it!
How much was the custom graphic?
I got our graphics from NBS: www.nbsinc.net/
It cost around 600 to get side and front graphics for 2 vending machines....so around 300 per machine. They were custom graphics so we needed to pay setup charges for the printing.
@@HappyVending that’s a site I’ve been so hard trying to find. I’m looking into having all of my machines totally customized instead of old decals and wraps. Of course that’s going to be a bit of a time process lol
How much is for a new graphic?
I got our graphics from NBS: www.nbsinc.net/
It cost around 600 to get side and front graphics for 2 vending machines....so around 300 per machine. They were custom graphics so we needed to pay setup charges for the printing. The company also sells generic designs for machines...so those are probably cheaper. Check out their website and request a quote.
@@HappyVending thank you for the response, I'll check them out
Did they get New Vending Machines
We have all used machines
Sigh... ok never mind.