Fun fact about your z28.. You can buy a Key fob off ebay for your car. Three relatively easy to program to your vehicle. Makes life a bit easier than always having to physically use the key each time to open trunk & doors.
For the A/C line by the strut tower brace - just bend the A/C line inward slightly. You don’t want that A/C line riding on the STB, it will eventually wear a hole in the line. Also, there is an affordable aluminum throttle body elbow available on eBay. It’s way less restrictive. Thanks for the videos. Looking forward to more...! 🤘
Thank you very much for your video and comments on this UMI Performance Strut Tower Brace. As a result of your review and installation, I am now waiting for my UMI Performance strut tower brace to arrive in the mail. I have a 1995 Camaro Z/28 1LE.
I had to replace my transmission mount on my 93 z28 about 1 month ago if you get any jolt from the console area that’s the issue. Just a heads up! Thank you for these videos it’s really helping me keep my car up and running
Same thing with my 97 Z28. First time it happened the bang was so loud I was sure something broke. Trans mount rubber had separated from the metal part.
Sweet video! I just got a 97 z28 vert and stumbled upon your video. Very helpful. I’m not the most mechanically inclined so this video really helps motivate me to do some diy installs. Got yourself a subscriber 👍 keep it up
Yay, Camaro content! Nothing like the roar of the LT1🙂 How's that STB for body roll? I was thinking on doing my 96Z28 drop top, just heard negative things like its a waste of $.
I have an odd question, did replacing the lower control arms, end links, or bushings change the ride height in back any? Did it also make the ride rougher in back?
You could have moved the line over a bit and it would have fit. I have installed at least 3 without removing it. Just trying to help others that may watch this video so they don't do an extra step when not needed.
Replace the stock rear end and upgrade the tranny ASAP! I am finally doing it after putting it off for 26 years. I got my 94`Z convertible in Apr of 97` with 9000 mi on it. It now has 99,000. Do this before anything else. You will not be sorry. It will save you time,money and disappointment. Have a good day. From Sioux City,Ia.
8:05 Do not do that swerves with your car near to other drivers, because they could think You are drunk, they could be scared, and it could contribuite to an accident. Repent and believe in the gospel of Jesus, the Son of God, the Messiah.
Fun fact about your z28.. You can buy a Key fob off ebay for your car. Three relatively easy to program to your vehicle. Makes life a bit easier than always having to physically use the key each time to open trunk & doors.
which one you recommend
lmk which one
For the A/C line by the strut tower brace - just bend the A/C line inward slightly. You don’t want that A/C line riding on the STB, it will eventually wear a hole in the line. Also, there is an affordable aluminum throttle body elbow available on eBay. It’s way less restrictive. Thanks for the videos. Looking forward to more...! 🤘
Its also available on summit, just bought 1 for 89.99 due to having a hard time putting on the rubber stock one
glad to see another camaro video. definitely want to do these same upgrades to my camaro
Thank you very much for your video and comments on this UMI Performance Strut Tower Brace. As a result of your review and installation, I am now waiting for my UMI Performance strut tower brace to arrive in the mail. I have a 1995 Camaro Z/28 1LE.
I had to replace my transmission mount on my 93 z28 about 1 month ago if you get any jolt from the console area that’s the issue. Just a heads up! Thank you for these videos it’s really helping me keep my car up and running
Common break. Replace with a poly one. Take care.
Same thing with my 97 Z28. First time it happened the bang was so loud I was sure something broke. Trans mount rubber had separated from the metal part.
Engine sounds NASTY on the AirPods !!💯
😈
im actualy getting a 4th gen in 2 days lol, very excited to work on it!
Z28?
Yessirrrr 😎
Good Job.
I will have new front suspension on my camaro as well, got the parts ready just need to find time to put them in.
Nice vid. Miss my 95 Z28. Fun cars, LT1 power 💪🏼
As always. Love the attention to detail.
Sweet video! I just got a 97 z28 vert and stumbled upon your video.
Very helpful. I’m not the most mechanically inclined so this video really helps motivate me to do some diy installs. Got yourself a subscriber 👍 keep it up
Great video, can’t wait for the shock video. I have the same shocks and looking to upgrade also.
Yay, Camaro content!
Nothing like the roar of the LT1🙂 How's that STB for body roll? I was thinking on doing my 96Z28 drop top, just heard negative things like its a waste of $.
In my opinion, it helps and was worth it.
Another great Video ! Keep it going PLAYA !
It looks like your new control arms have urethane bushings. I would have gotten urethane bushings for the sway bar mounts as well.
Nice job and those are some great parts. Too bad the sticker was upside down.
🙏👊
OH! Ok. They are urethane. Super job.
Wrap that frig line with a piece of black rubber hose, that's about the same size.
Do you plan on changing the rear springs when you replace the shocks ?
I would like to, yes.
Where did you get that LT1 plate for the top of the throttle body?
czcams.com/video/hqgeZ2XgIfE/video.html
@@ReynoldsRides thank you! Can’t wait for it to get here.
Beautiful car. I also have a Red 95 walkaround in my videos.How much faster is the z28 compared to the Mustang?
Saben si la barra estabilozadora tracera de camari 4 g le queda a un 3 g
Where would I get the new center console lid?
Hawks Motorsports
Have a link to the center console lid?
You should invest in some air tools. Makes all this way easier and faster!
When you make it big on CZcams, take the Corvette to "Kin Dig It".
Any updates on the CAMARO!?
I have an odd question, did replacing the lower control arms, end links, or bushings change the ride height in back any? Did it also make the ride rougher in back?
I did not see a change in ride height. They did make the handling stiffer (which I guess could be equated to rougher).
You didn't have to take off the AC sensor to install, and also you can slightly move the other AC line so it's not rubbing.
I did have to remove the sensor. I tried installing the brace without removing it and couldn’t.
You could have moved the line over a bit and it would have fit. I have installed at least 3 without removing it. Just trying to help others that may watch this video so they don't do an extra step when not needed.
Honestly, I’ve never dared to bend an AC line. Do they bend easily?
@@ReynoldsRides Yes they are very easy to move, just aluminum lines but just don't go too crazy with it lol.
Replace the stock rear end and upgrade the tranny ASAP! I am finally doing it after putting it off for 26 years. I got my 94`Z convertible in Apr of 97` with 9000 mi on it. It now has 99,000. Do this before anything else. You will not be sorry. It will save you time,money and disappointment. Have a good day. From Sioux City,Ia.
LOL! Thumbs up on the lube on the bushing. I was just about to respond (-:
👍👌🚘
😎👍🏾💯🔥
get yourself a Torch cut that shit off well the links lol
كم
You really need another RED car.....
🏎💨
@@ReynoldsRides LOL
8:05 Do not do that swerves with your car near to other drivers, because they could think You are drunk, they could be scared, and it could contribuite to an accident. Repent and believe in the gospel of Jesus, the Son of God, the Messiah.
Ctfu.... Don't go to the jail speeding!!!