DIY SEMI, TRUCKING AND MORE • 59 seconds ago For great fuel discounts with no fuel card required, watch this video! czcams.com/video/LjB5Y60p1qI/video.html
Good evening Sir I have a Detroit 12.7 470 horses going up mountains 40k plus truck always start over heating... Will manually turning it on stop truck from over heating? Everything else works great runs like a champ
Great video! After paying a shop to diagnose a stuck fan on, I watched them slap on a new solenoid, then new high pressure switch and charge 2 hours of labor. They swore it was fixed... Didn't bother diagnosing the fan clutch with a vacuum guage or pressure test. 20 mins down the road fan was stuck on... I drove home and personally removed the fan clutch and hub from the engine bay. Not a hard of a job. I opened the fan clutch on a table and found the 20 cent o ring falling apart, not sealing air in. You couldn't hear it leak but it was enough to force the fan to run. Folks, tips in this video will save you hundreds of dollars in bad repair service bills and the frustration of trusting unskilled/ lazy mechanics with your truck.
This video saved a trip to the repair shop and untold headache. Testing the solenoid with the key on revealing air going to the fan but fan stuck in place. "Light" tapping 😅 loosened it right up
Just purchased a Columbia with this very problem. I will be checking all of the suggestions and really appreciate the in depth tutorial. Definitely subscribed
The clutch was stuck in my case too !! I smacked it with a hammer after changing solenoid and ac high pressure switch, and bam it released and rolled freely after I blew out with air hose was real dirty gravel lot also ! Thanks for video saved my butt !!
Just gotta thank YOU for mentioning the stick clutch. I left my hood open over night and the fan was stuck in afterwards. I jumpered the airline at the switch so it had full truck air to the clutch all the time and with the engine off and air changed rapped it with a hammer and she let go. $450 and many hours saved! Thank YOU so much!!!
Thanks. I went on vacation and when I came back the fan kept running. I was troubleshooting the systems when I came across your video after I got stuck. I light tap on the clutch hub did the trick. Thank you
Thank you so much for this video. You helped me diagnose my problem while I was sitting at a Walmart distribution center in Casa grande Arizona and was able to buy the part the next day. Got the solenoid and repaired it myself and now I’m back on the road with no trouble. Thanks so much I’m gonna be mentioning this and you in my next video on the clutch trucker channel. Thanks again
Great video. I subscribed. My 2017 Cascadia sat on my concrete driveway for a month (my bad for not starting it once a week for 30 minutes) and yesterday when I took it for a ride I noticed the fan was on all the time. Watched your video, verified I had air going to it with the ignition switch on, no air leaking, so I tapped on the fan clutch last night,but it would not release. This morning I started up the truck and aired it up to the 140 psi max (last night it was 110-120 psi), shut truck off, turned ignition to the on position and tapped the fan clutch 8 to 10 times and it released. Whew!! Seems to be fine and I will be starting the truck at least once a week from now on. Thanks again. Be safe. ✌️
Thank you this video really saved me time and $ my truck had been sitting in a dirt lot for two months and the fan was stuck on wouldn’t move with key in on position, I tried your hammer trick and it popped sprayed oil around it cycled key on and off and now it functioning properly THANK YOU
Subscribed you saved my butt 6nz cat checked solenoid ran power through it. Working now here’s where you come in I ran through a huge construction dust storm for miles. I said why not hammer time … I see dust welp didn’t work immediately but by end of day viola I give you full credit
Thank you so much for making this video. It helped me alot. I changed the fan clutch solenoid on my 2018 Freightliner Cascadia but the fan stilled stayed on. Then I tapped the clutch lighting with a hammer while ith key was on and it worked.
Awesome video. Just this morning I noticed my fan was louder than usual so I realized it was stuck in the on position. After watching your video my diagnostic was a corroded broken wire at the solenoid. Thank you for your helpful video.
Man I love how you went over everything and explained it. Perfectly Thank you!!! I am have an issue right now, fan clutch keeps spinning, found out we need to charge AC no AC in the truck blowing. But I am going to go over all the things you talked about. I just subscribed to your channel :)
Hey Adam, I just wanted to thank you for this video my van was staying on I troubleshoot it it just like you showed and it’s looking like it’s the high pressure switch for the AC when I turn off the AC the fan turns off the switch inside! Anyway thank you I appreciate the video keep making them!!!
Good in-depth tutorial! I'm having an issue with my own engine fan at the moment. I'll be using this to try to diagnose and see if I can't find the issue. Got sub out of me.
Thanks for the clear info. Just learning my truck and now know the solenoid I saw just today is actually for (fan solenoid). My fan is on when engine off and no pressure but also stays on when running and has pressure and when outdoor temp is low in winter. So, will diagnose as you described. Appreciate it.
Bro, you are a fucking legend! This video may have saved me hundreds, maybe a thousand dollars in labor and parts. Solenoid was loose and dirty. Cleaned it with Duster, problem solved.
Great explanations. I have a Maxforce so anything you can say to compare if you know would be great. Still what your doing applies to all situations. Thanks.
Some trucks like paccar may have two high pressure ac switches. One thing with Cummins isx if the fan clutch is bad it will stay in the on position. Also if the clutch is thin enough it can separate and now you have a clutch, fan and radiator to replace. I had the clutch fail in that fashion on my isx
The hammer tricked worked for me after replacing numerous parts,I had to re watch a couple of times.dont forget to have air pressure and engine on not running
Great vid....my truck started making a high wind noise while driving. Could it be the fan clutch? The mechanic says I need to change the fan clutch solenoid....but he said the clutch itself is fine. I just wasn't sure if thats the reason for the high wind sound. But what I did notice when he checked and tried to spin the fan by hand....it didn't spin. But he did do air pressure test.....and his suggestion was getting solenoid replaced....it's a 2012 cascadia dd15
did he have the key on and air pressure built when he tried to spin it by hand? give that a try. if it spins by hand then the solenoid is releasing the clutch. If not, could be solenoid. try to walk thru the steps in the video. if he did test it with air then he is probably right. He looked at it hands on so I would probably trust what he had to say.
Yesterday I was driving home, too, turned on, fan clutch and started working. I thought maybe the solenoid needs to be replaced. I changed a new one. but still on I came home. And was about change clutch But then I started to check, the wiring found frayed wire under starter and it was all a problem. started working properly.
Hello Adam thank you so much for the video I have 2016 freightliner cascades had an issue with the A/C took it to 3 shops already nothing is fixed Dan clutch stays on and it had a high pressure switch code replaced it but still the fan clutch is on could you see if you can shade some light on this issue for me . Thanks
perhaps it wasnt a bad switch. You could actually have high ac pressure. have them throw some gauges on and check. If it never ever shuts off, do the checks in this video. see if it is capable of shutting off at all. clutch or solenoid could be bad. see if you can spin it with the truck off key on
Having an issue with my volvo, changed the solenoid and tapped the clutch and fan still turns, but with key on and engine off the fan doesn't freely spin...
It will have to be taken apart and fixed...in my opinion, if it is old and you are taking it apart anyway, you may as well put a new one on. If its not that old, maybe you just a rebuild kit.
That was really helpful, but my default position is on and my fan freewheels even with the airline disconnected. But I'm not convinced the clutch is bad. Any opinions would be appreciated.
My fan is always running when I drive down the freeway, and my ac stopped working, and the mil light is on. I hope it’s just the high pressure switch. Great video
@@HighWayRambo it was the a/c high pressure switch that’s on the top metal pipe that leads off the ac compressor and goes back towards the firewall. Don’t forget the small plastic ring when you screw on the new one. It will leak refrigerant of you leave it off
Got to be older than a 2012 model,no DEF on that model and 2008 and later Columbia was replaced by the Cascadi model,same with the Century Class.The only exception was later yr built Coranado model.Also later models had the DD15 replaced the 60 Series.
i have freightliner Columbia but my fan says on i changed the solenoid and ac switch and i have no air leak and fan clutch did not get stuck i have checked everything you mention on your video but my fan stays on the second thing i have is i don't have cruise control when iam driving but when i am parked i have cruise control i changed clutch switch and cruise control switch but still i have the same issue
Hello sir I have 2000 freightliner Classic xl , with 60 Detroit 12.7 motor, And I replaced new fan clutch, and solenoid, and Ac high pressure switch . But fan still runs on even engine is cold. Any suggestion , could be relay? Or something else. I noticed when I turn ac on ac compressor turn on off but, ac working. And I liked your videos and subscribed. Thank you
any air leaks around the clutch? possible overcharge in refrigerant. at a certain point, once you adddress all the mechanical issues, it can be electronic and need to be hooked to a computer for eelctrical diagnostic
Hi, I have a Freightliner Cascadia 2015. It’s hub fan gets stuck a lot and works sometimes but other times it doesn’t. The secondary air tank pressure drops and the fan keeps moving. This happens a lot what do you think is wrong?
Please can you help me my fan is going to be on only when I am driving with low temperature less than 150 or higher and stays on as long as am driving I pretty much change everything whole engine hornes I changed solenoid twice I changed all the sensors coolant reciver sensor yesterday I went to frieghliner after I paid $$$$$ nothing when I stopped and reset my truck everything is going to be normal and working again but when I drive that is when it comes on if you have any ideas please let me know is 2007 frieghliner century with Detroit engine thanks
I have the Detroit D15 and some pressure is building up in the cooling system that pushes coolant out of the surge tank. Engine's fan looks OK. What could cause that problem?
that's not good news. without knowing all the details, the first things that come to mind are: bad air compressor, bad head gasket ,or cracked head. If you are looking to start looking for something simple first, check the cap on your surge tank...make sure it is the correct psi, and that it is functioning...or spend a few bucks on a new one. I'm not all that experienced with the dd15, drove one for a bit but never had to work on it. sorry to say, if it's not a faulty pressure cap, then it's probably an expensive fix. Someone more experienced with that engine would be more qualified to help you.... but that's just my first thoughts on it.
@@DIYSEMI , coolant is pushing and leaking through the little, overfilled hose. I noticed silicone under the heads. It says to me there is not head gasket, and somebody put just silicone. I do not think it is original. Truck is 2016, and has just around 300K miles on it. Thanks for your good advice. I appreciate it.
if all the mechanical items seem to be working properly, it is possible it's an ecm issue. or a temp sensor might not be sending a good signal to let the ecm know to kick it in. just my first thought.
I got a 97 freightliner fld120 with a cummins m11 my fan wont turn off it did twice and started blowing out the over flow line of the reservoir ( i think the reservior was over filled ) my question is even with the fan blowing my temp should still be above 140-150 right? I replaced my thermostat and still have the same issue. Will the fan really keep my water temp down that low?
@DIYSEMI we haven't been running it for long but last year when we bought it the temp gauge still showed that same temp even in the summer ( I just wrote it off as a bad thermostat ) we just had it replaced and found out it is stuck closed wouldn't that cause it to run hotter? I also live in Florida it was about 55-60° here when we ran it after replacing the thermostat.Thanks for helping me BTW this has been racking my brain for the past few days! I
On a 2012 Freightliner M2. Once my fan engages, it stays on. It does it even when the A/C is off. That wouldn't have anything to do with the high pressure switch would it?
DIY SEMI, TRUCKING AND MORE
• 59 seconds ago
For great fuel discounts with no fuel card required, watch this video! czcams.com/video/LjB5Y60p1qI/video.html
Can you answer my questions which I mentioned in comment
Good evening Sir I have a Detroit 12.7 470 horses going up mountains 40k plus truck always start over heating... Will manually turning it on stop truck from over heating? Everything else works great runs like a champ
Turning Fan on 🤦🏾
@@JRich-kq6dc [oka
Great video! After paying a shop to diagnose a stuck fan on, I watched them slap on a new solenoid, then new high pressure switch and charge 2 hours of labor. They swore it was fixed... Didn't bother diagnosing the fan clutch with a vacuum guage or pressure test.
20 mins down the road fan was stuck on... I drove home and personally removed the fan clutch and hub from the engine bay. Not a hard of a job. I opened the fan clutch on a table and found the 20 cent o ring falling apart, not sealing air in. You couldn't hear it leak but it was enough to force the fan to run.
Folks, tips in this video will save you hundreds of dollars in bad repair service bills and the frustration of trusting unskilled/ lazy mechanics with your truck.
Thanks bud, I tapped gently, all fixed, truck was parked for ten days near a dirt road 🙏🏾
This video saved a trip to the repair shop and untold headache. Testing the solenoid with the key on revealing air going to the fan but fan stuck in place. "Light" tapping 😅 loosened it right up
Just purchased a Columbia with this very problem. I will be checking all of the suggestions and really appreciate the in depth tutorial. Definitely subscribed
Thanks Bubba.. you did a really good job explaining the entire operating mechanism of the fan.
The clutch was stuck in my case too !! I smacked it with a hammer after changing solenoid and ac high pressure switch, and bam it released and rolled freely after I blew out with air hose was real dirty gravel lot also ! Thanks for video saved my butt !!
cool
Thank you for your time to show us.
Thanks for the info! We have a 17 Per with Paccar mx13. Fan won’t turn off going to check everything you just mentioned and hopefully we get it fixed
Love you video I learn a lot from your videos you are awesome especially when I open up my own authority I follow your step-by-step thank you
Just gotta thank YOU for mentioning the stick clutch. I left my hood open over night and the fan was stuck in afterwards. I jumpered the airline at the switch so it had full truck air to the clutch all the time and with the engine off and air changed rapped it with a hammer and she let go. $450 and many hours saved! Thank YOU so much!!!
Thanks for the help! On mine was the celenoid. Tapping gently and done.
Thanks. I went on vacation and when I came back the fan kept running. I was troubleshooting the systems when I came across your video after I got stuck. I light tap on the clutch hub did the trick.
Thank you
Thank you 🙏,
You saved me time and money
Volvo 2016. Bad solenoid.
Thank you so much for this video. You helped me diagnose my problem while I was sitting at a Walmart distribution center in Casa grande Arizona and was able to buy the part the next day. Got the solenoid and repaired it myself and now I’m back on the road with no trouble. Thanks so much I’m gonna be mentioning this and you in my next video on the clutch trucker channel. Thanks again
Glad it helped!
Great video. I subscribed. My 2017 Cascadia sat on my concrete driveway for a month (my bad for not starting it once a week for 30 minutes) and yesterday when I took it for a ride I noticed the fan was on all the time. Watched your video, verified I had air going to it with the ignition switch on, no air leaking, so I tapped on the fan clutch last night,but it would not release. This morning I started up the truck and aired it up to the 140 psi max (last night it was 110-120 psi), shut truck off, turned ignition to the on position and tapped the fan clutch 8 to 10 times and it released. Whew!! Seems to be fine and I will be starting the truck at least once a week from now on. Thanks again. Be safe. ✌️
Awesome
Thank you this video really saved me time and $ my truck had been sitting in a dirt lot for two months and the fan was stuck on wouldn’t move with key in on position, I tried your hammer trick and it popped sprayed oil around it cycled key on and off and now it functioning properly THANK YOU
Good video. My ac compressor ironically just exploded as I was trying to figure out why my fan was stuck on .
Glad i found ur channel. I appreciate the DIY'r style.
Subscribed you saved my butt 6nz cat checked solenoid ran power through it. Working now here’s where you come in I ran through a huge construction dust storm for miles. I said why not hammer time … I see dust welp didn’t work immediately but by end of day viola I give you full credit
Thank you so much for making this video. It helped me alot. I changed the fan clutch solenoid on my 2018 Freightliner Cascadia but the fan stilled stayed on. Then I tapped the clutch lighting with a hammer while ith key was on and it worked.
Awesome video. Just this morning I noticed my fan was louder than usual so I realized it was stuck in the on position. After watching your video my diagnostic was a corroded broken wire at the solenoid. Thank you for your helpful video.
Good job explaining this for semi truck drivers. Have a good week.
Thanks, you too!
Thank you for making this video. I just fixed my problem by following your advice.
What was your issue
Excellent explanation with good steady video. Thanks. Hope shops leave your fleet air filter alone. Sucks when a tech trashes it.
yes sir!
Thank you so much for your time to create this video
Perfectly explained.
Man I love how you went over everything and explained it. Perfectly Thank you!!! I am have an issue right now, fan clutch keeps spinning, found out we need to charge AC no AC in the truck blowing. But I am going to go over all the things you talked about. I just subscribed to your channel :)
Good info, thanks, man.
Hey Adam, I just wanted to thank you for this video my van was staying on I troubleshoot it it just like you showed and it’s looking like it’s the high pressure switch for the AC when I turn off the AC the fan turns off the switch inside! Anyway thank you I appreciate the video keep making them!!!
Glad it helped
Thanks for taking the time to make this. Very helpful
Thanks . God bless you
Thanks for the info. Mine were loose cable wires to the solenoid.
Thank you for the information it's help a lot !!
Good video and narration. I subscribed your channel only because of the way you requested at the start of this video.
Thank you sir it helps a lot.
Good Job, clear and precise.
Great video I fixed my problem
Turns out our was on because of sitting in the dusty lot.
I’d lead with that. Hammer worked.
Looking forward to that fan install vid.
Just ordered the parts, will be there when i get home in a week or so
saved our butts. you rock.
Thank you!
Thanks alot sir you saved me 900$ my clutch fan all it need it was a little hit with the hammer
Great video. Lots of information you just got yourself a new subscriber. I’m going through this problem now. Thanks for all the info.
very informative thanks
Good in-depth tutorial! I'm having an issue with my own engine fan at the moment. I'll be using this to try to diagnose and see if I can't find the issue. Got sub out of me.
Sounds like an air leak in the clutch.
I have a video on changing a fan clutch
I'll be sure to check it out. 👍🏻
@@DIYSEMI Thanks again! New solenoid and clutch installed after watching that video.
Thank you. Helped so much on my truck
Thanks for sharing
Thanks for watching!
Great video
Thanks for the clear info. Just learning my truck and now know the solenoid I saw just today is actually for (fan solenoid). My fan is on when engine off and no pressure but also stays on when running and has pressure and when outdoor temp is low in winter. So, will diagnose as you described. Appreciate it.
Thank you😊
Thanks bro its very informative
Ty kindly for the game...
Thanks for the video
👍 buen video!!
Very well explained...
Thanks for narrowing it done. Helps a lot
I love the video
Thank you...keep up the good work
Bro, you are a fucking legend! This video may have saved me hundreds, maybe a thousand dollars in labor and parts. Solenoid was loose and dirty. Cleaned it with Duster, problem solved.
Thanks sr
Thank You.
Perfect video , thanks subscribed
Helped me with my issue!!
You got yourself a new subscriber...
Good job.
This freightliner I’m driving has an engine fan switch in the cab should it be on or off?
when it's off the fan should cycle on its own. In the on position it should stay on
Great explanations. I have a Maxforce so anything you can say to compare if you know would be great. Still what your doing applies to all situations. Thanks.
Very helpful thank you very much.
Some trucks like paccar may have two high pressure ac switches. One thing with Cummins isx if the fan clutch is bad it will stay in the on position. Also if the clutch is thin enough it can separate and now you have a clutch, fan and radiator to replace. I had the clutch fail in that fashion on my isx
bet that was expensive
About 2500.00 with tow bill and motel room and three down days. So yes it was
ouch
Very good video
Thanks... great information!
The hammer tricked worked for me after replacing numerous parts,I had to re watch a couple of times.dont forget to have air pressure and engine on not running
Have done video on adapting the on and off switch?
Yeah I just replaced my fan clutch and hub worked fine for 3 days no fan won’t disengage can’t spin the blades probably the selenoid
Helped me out.
Is the gray wire suppose to have voltage?
Just liked and subd thank you for the video
Great vid....my truck started making a high wind noise while driving. Could it be the fan clutch? The mechanic says I need to change the fan clutch solenoid....but he said the clutch itself is fine. I just wasn't sure if thats the reason for the high wind sound. But what I did notice when he checked and tried to spin the fan by hand....it didn't spin. But he did do air pressure test.....and his suggestion was getting solenoid replaced....it's a 2012 cascadia dd15
did he have the key on and air pressure built when he tried to spin it by hand? give that a try. if it spins by hand then the solenoid is releasing the clutch. If not, could be solenoid. try to walk thru the steps in the video. if he did test it with air then he is probably right. He looked at it hands on so I would probably trust what he had to say.
High wind noise? I’m having issues too. I hear a whistling when I boost and my engine fan is now staying stuck on.
Yesterday I was driving home, too, turned on, fan clutch and started working. I thought maybe the solenoid needs to be replaced. I changed a new one. but still on I came home. And was about change clutch But then I started to check, the wiring found frayed wire under starter and it was all a problem. started working properly.
Lol I taped It very gently 🎉😅
Hello Adam thank you so much for the video I have 2016 freightliner cascades had an issue with the A/C took it to 3 shops already nothing is fixed Dan clutch stays on and it had a high pressure switch code replaced it but still the fan clutch is on could you see if you can shade some light on this issue for me . Thanks
perhaps it wasnt a bad switch. You could actually have high ac pressure. have them throw some gauges on and check.
If it never ever shuts off, do the checks in this video. see if it is capable of shutting off at all. clutch or solenoid could be bad. see if you can spin it with the truck off key on
Having an issue with my volvo, changed the solenoid and tapped the clutch and fan still turns, but with key on and engine off the fan doesn't freely spin...
love your vids keep them coming :-)
Thanks, will do!
I just subscribed thanks
Thanks for subbing!
Good video, but I don’t have ground going to my solenoid
What about if is leaking air i hear whistle coming out top of the clutch do I have to replace the whole clutch
It will have to be taken apart and fixed...in my opinion, if it is old and you are taking it apart anyway, you may as well put a new one on. If its not that old, maybe you just a rebuild kit.
That was really helpful, but my default position is on and my fan freewheels even with the airline disconnected. But I'm not convinced the clutch is bad. Any opinions would be appreciated.
My fan is always running when I drive down the freeway, and my ac stopped working, and the mil light is on. I hope it’s just the high pressure switch. Great video
what was your problem. because i’m having same problem
@@HighWayRambo it was the a/c high pressure switch that’s on the top metal pipe that leads off the ac compressor and goes back towards the firewall. Don’t forget the small plastic ring when you screw on the new one. It will leak refrigerant of you leave it off
Will the fan clutch Solenoid effect the regen process
Got to be older than a 2012 model,no DEF on that model and 2008 and later Columbia was replaced by the Cascadi model,same with the Century Class.The only exception was later yr built Coranado model.Also later models had the DD15 replaced the 60 Series.
It's a 2012 glider
I have a air leak on a fitting that’s connected behind the fan clutch and the belts connected to the fan. Can that be reason my fan is staying on?
Yes could very well be
@@DIYSEMI I need help figuring out what fitting is called. Do y’all have a email or something I can send video of the fitting that’s leaking
i have freightliner Columbia but my fan says on i changed the solenoid and ac switch and i have no air leak and fan clutch did not get stuck i have checked everything you mention on your video but my fan stays on the second thing i have is i don't have cruise control when iam driving but when i am parked i have cruise control i changed clutch switch and cruise control switch but still i have the same issue
Mine is stuck on how can i get it to turn offf? Right now that is cold it is making my heater not work.
Hello sir I have 2000 freightliner Classic xl , with 60 Detroit 12.7 motor,
And I replaced new fan clutch, and solenoid, and Ac high pressure switch . But fan still runs on even engine is cold. Any suggestion , could be relay? Or something else. I noticed when I turn ac on ac compressor turn on off but, ac working. And I liked your videos and subscribed. Thank you
any air leaks around the clutch? possible overcharge in refrigerant. at a certain point, once you adddress all the mechanical issues, it can be electronic and need to be hooked to a computer for eelctrical diagnostic
Hi, I have a Freightliner Cascadia 2015. It’s hub fan gets stuck a lot and works sometimes but other times it doesn’t. The secondary air tank pressure drops and the fan keeps moving. This happens a lot what do you think is wrong?
Sounds like you have an air leak somewhere
Please can you help me my fan is going to be on only when I am driving with low temperature less than 150 or higher and stays on as long as am driving I pretty much change everything whole engine hornes I changed solenoid twice I changed all the sensors coolant reciver sensor yesterday I went to frieghliner after I paid $$$$$ nothing when I stopped and reset my truck everything is going to be normal and working again but when I drive that is when it comes on if you have any ideas please let me know is 2007 frieghliner century with Detroit engine thanks
I have the Detroit D15 and some pressure is building up in the cooling system that pushes coolant out of the surge tank. Engine's fan looks OK. What could cause that problem?
that's not good news. without knowing all the details, the first things that come to mind are: bad air compressor, bad head gasket ,or cracked head. If you are looking to start looking for something simple first, check the cap on your surge tank...make sure it is the correct psi, and that it is functioning...or spend a few bucks on a new one. I'm not all that experienced with the dd15, drove one for a bit but never had to work on it. sorry to say, if it's not a faulty pressure cap, then it's probably an expensive fix. Someone more experienced with that engine would be more qualified to help you.... but that's just my first thoughts on it.
@@DIYSEMI , coolant is pushing and leaking through the little, overfilled hose.
I noticed silicone under the heads. It says to me there is not head gasket, and somebody put just silicone. I do not think it is original. Truck is 2016, and has just around 300K miles on it.
Thanks for your good advice. I appreciate it.
From my experience it came to be the air compressor so I’d troubleshoot that after the filler cap.
Adam I have an 03 columbia the fan clutch won't come on automatically.i have to turn on fan manually.i changed the solenoid
if all the mechanical items seem to be working properly, it is possible it's an ecm issue. or a temp sensor might not be sending a good signal to let the ecm know to kick it in. just my first thought.
I got a 97 freightliner fld120 with a cummins m11 my fan wont turn off it did twice and started blowing out the over flow line of the reservoir ( i think the reservior was over filled ) my question is even with the fan blowing my temp should still be above 140-150 right? I replaced my thermostat and still have the same issue. Will the fan really keep my water temp down that low?
in this cold weather yes
@DIYSEMI we haven't been running it for long but last year when we bought it the temp gauge still showed that same temp even in the summer ( I just wrote it off as a bad thermostat ) we just had it replaced and found out it is stuck closed wouldn't that cause it to run hotter? I also live in Florida it was about 55-60° here when we ran it after replacing the thermostat.Thanks for helping me BTW this has been racking my brain for the past few days! I
@DIYSEMI also I'm going to run through all your diagnostics tomorrow hopefully I can find out what's causing it to stay on!!
did you verify the temp gauge is working, since it never changes?
@@DIYSEMI I am fairly certain the gauge is working as it should
On a 2012 Freightliner M2. Once my fan engages, it stays on. It does it even when the A/C is off. That wouldn't have anything to do with the high pressure switch would it?
2013 cascadia spn 647 fmi 5 how do i know if its the solenoid or the fan cluth ?