DIY: Homemade Dremel Cork Drum Sanders
Vložit
- čas přidán 28. 12. 2018
- Very practical, incredible easy and very durable, you can use different abrasive paper grits.
You just need:
Dremel or any other rotary tool.
Sandpaper similar to the one that i used.
Wood glue.
Plastic pipe (i used 16mm)
Painting/paper tape
Cork !!
Very easy and cheap to do, this is an updated version of the first video that i did 3 years ago ;)
Music list:
[No Copyright Music] Dream to live - ZAYFALL
Music removed because it´s not free anymore....
(Homemade project woodworking sanding bands tool, mandrel accessory, useful bit for drill, Start to finish full video)
#DTekDIY - Zábava
Thanks, it was very helpful since I was running out of drum sanders!
Excellent. Thank you. I also love videos without any talking, where the instruction is all visual. Well done!
Nice! Thanks for the tip, simple yet useful!
awesome !!! i was going to use extra strong glue, didn't expect it will work with wood glue ! great video thx
Yes, wood glue works if you use "painters tape", when it dryes it "fuses" to the paper grit.
Powerful idea, great job!
Thanks,it’s very useful. Cheers!
Absolutely brilliant. So simple but so clever. I’ll start doing some later 👍
I uploaded a similar video 3 years ago and re-ploaded this one a few months ago, i use this diy sanding drums all the time ;)
DTeK well I needed some fine grade paper to do the hard to reach places on my motorcycle casings and you can’t get them over 600 I think and then you have to wait because they come from China
Well done!
Super helpful to heck my little cheap manicure tool to sand my nails for fake nails! :D My good drill is too fast for that. Huge thanks from Hungary,EU! :)
Thanks :)
Cork is brilliant.
amazing idea.
Very useful, thanks
Fantastic idea.
thanks
Great work ! i like your channel :)
Nice work
Great video thanks
Best I’ve seen
If my wife saw me using a razor knife to cut sandpaper on her table that looked like that, this would be my last post . Ever
ha ha ;)
Show de aula!!! Parabéns, ganhou meu like e a minha inscrição.
Obrigado ;)
that methiod of getting a spiral cut is very smart!
My tention is free when I see your vidio tq
Simple and effective
For dremel we can buy it however. But bigger, for drills etc are hard to find. I am going to make bigger ones becouse can't find it
thanks
nice
nice.
For people asking about the pvc pipe diameter: he has to sand the cork (which is 24/25 mm diameter) so it all depends on how much you sand it down.
E.g: Lets say you have a 25 mm cork and sand 5mm off from it, your pvc pipe needs to be 20mm.
This explanation sounds kinda silly but since I see so many people asking the same...
in this case i used 16mm pvc pipe, the cork just need to be sanded a little bit bigger than the inner diameter of the pvc pipe for a tight fit, thank you for your reply :)
What is the size of the plastic tube? And where can i find it?
Can we use this for metals??
Sandpaper works sooooooo well with glue smeared all over it dude! Such attention to detail....bet you make some reeeeeeal quality stuff from what that video just showed
Tell everyone you're a karen without telling everyone you're a Karen. What a loser.
Saya salut kreatif
They have sanding attachments for that
How do you get sandpaper which is thicker and will last longer while sanding?
Store
На какое основание клеили скотч ?
This was a great video ... up to a point. It didn't show how you got the dowel out of the band of sandpaper since the dowel had tape the sandpaper was glued to the tape???. What was the thing attached to the cork?
Thanks, i don´t remove anything, the plastic pipe is part of the "drum sander", i just cut it in smaller pieces and the smaller pieces will fit in the "cork attachement" has you can see in the final part of the video.
@@DTeK Thanks for this. I thought the plastic pipe was a solid wooden dowel!
Did you remove the wrap from the pipe before cutting ?
no, the plastic pipe is part of the drum sanders.
What is the number (grit #) of sanding paper you used in the video
80 grit
What is the core? That you wrapped the tape over?
It´s a plastic pipe used in electrical wiring.
@@DTeK what the dia size of plastic pipe please my dear?
but wont getting the glue on the sandpaper (rough side) soften it?
Its a minimum amount of glue where the sides of the sand paper are touching, it doesn´t affect it.
@@DTeK ok thanks. i made my sanders 2hrs ago, thank you for the video
Only the paper-based skin will wear out quickly. Must be used on fabric.
it doesn´t wear, it remains glued
молодец)леруа мерлен и dexter тебя спалил)))
THANKS .from Argentina
Nice but I find it not very dependable seeing how no clue to keep the cork from doing its intentions without spinning also??
Pressure fit ;)
How u remove the wood inside the sandpaper?
the wood? i used cork
What size plastic pipe
12mm in diameter
😃N😃 i 😃C😃
is the superglue in the cork working?
The cork is not glued, its only used to atach the sanding drum
@@DTeK I means this: 1:23
@@luter82 sorry, yes its working, i use it often and after 1 year its holding fine.
@@DTeK oh great, Thanks!
couldn't you just sand the pvc pipe to roughen it instead of taping over it?
No because the wood glue will not stick, but if you use another tipe of glue it will work, i choose the wood glue and the painters tape because they are super cheap.
They miraculously fell off the dowel back stage, can't believe the rod easily came out - if it had you'd have shown its removal
What a glue name ?
it is wood glue
Yep, coppying that one...
Забивать абразивный слой клеем???Да тебе премию Дарвина надо выдавать!!!
ا
Take your gloves off, if they get caught is not fun, never wear gloves with spinning tools
Maybe with high power tools, this is a 170 w dremmel that i use always at low speeds using around 30/40w.
This is absolute not working!
it works, i use the same method 5 years later, tell me what is not working and i tell you what are you doing wrong ;)