Is PLYWOOD BETTER THAN HARDWOOD - shop made ply nightstand
Vložit
- čas přidán 23. 02. 2024
- I designed this floating nightstand to go next to the bed in my home office. My home office is where my beautiful desk is and I wanted this to match it so I used some of the off cuts and made some shop sawn veneers and subsequent shop made plywood.
If you'd like to support our channel and join our growing Patreon crew:
/ coffeycustombuilds
Select patreon tiers get $10 (50%) off plans!
If you'd like to buy these build plans:
www.coffeycustombuilds.com/sh...
Affiliate Links (These help support my channel):
3M Cubitron Sandpaper 775L (my preferred sandpaper): lddy.no/1i4wg
Glue Roller: amzn.to/404WOXs
3M Green Tape: amzn.to/42VgDBZ
Paint Scraper: amzn.to/4c2v3EP
Set Up Blocks: amzn.to/480x5TS
Starrett Tape Measure: amzn.to/3Rt6SqQ
Festool Kapex: amzn.to/3sWE7Jz
Festool OF1400: amzn.to/3ObDHWX
Festool OF2200: amzn.to/48AKbXE
Festool Domino DF 500: amzn.to/3GpLwUJ
Unibond Glue: www.vacupress.com/product-cat...
No. 5 Dominos: lddy.no/1iq3i
Shaper Origin: www.shapertools.com/coffey
Scotch Brite Pad Handle: amzn.to/48Y7hY0
Double Sided Tape: lddy.no/1iq3j
Bits & Bits 1/2" Compression Flush Trim: bit.ly/4a2mbOg
Stanley No. 4 Smoothing Plane: amzn.to/3uCJeyR
Festool TS60 Track Saw: amzn.to/3R8DpRg
Festool ETS-EC 150/5: amzn.to/416qkwx
MircoJig Push Stick: bit.ly/47GP2pO
Lumber Crayon: amzn.to/3RpFGci
CMT Orange Flat Top Ripping Blade: lddy.no/1iq3h
Totalboat: bit.ly/3IEHrOr
Starbond: bit.ly/3ITPpUy
MircroJig: bit.ly/3XecHbP
Magswitch: bit.ly/3H6uhJl
Bits & Bits: bitsbits.com/ref/6233/
Rustic Lumber Finish: bit.ly/3mZWDxF
Bidwell Wood & Iron: bit.ly/40geRJL (Use code COFFEY10)
Jobber: bit.ly/3iPzZps
Grabo: order.grabo.com/u/Coffey
Coffey Grinds: bit.ly/3GKL6rR
#woodworking #furniture #howto - Jak na to + styl
It makes so much sense to veneer your own plywood. You get to make a true 3/4 then as well. What a great night stand.
It's so nice to be able to make your own. There are SOOOOO many advantages
Wood pulp and pig hooves… would be a pretty sick band name.
🤣🤣
I wish you made this video about three months ago…🤣 absolute stunner Mike.
Thanks man! Also, sorry man! 😂
It's the face you make when spinning the glue roller that really makes the video. Good design and enjoyed the details shared. Great video.
I need to do a video of me just making faces.
AWESOME video mike! really loved the detail you showed and the mdf veneer was smart idea
Thanks homie! It's a straightforward piece but the veneer elevates it for sure
Lovely job 👏🏼
Thank you! Cheers!
Great job Mike!
Thank you
That's purdy. Well done!
Thank you! It's a nice little nightstand!
Well done video! Thank you for all the hard work you put into this!
Thank you for your support
Wow, for such a simple design, it is absolutely beautiful. Love the colour and the grain of the maple.
Thank you! It's really a fun piece
You are a fancy boy! Nicely done buddy!
I am! Thanks bro
Beautiful piece of furniture and very informative video. I love the video style you’ve developed and the quality of the builds you’re sharing.
Thank you sir! We are very happy with this and really appreciate your support
I just scooped up the vacupress 300 3cfm unit. got a 4x4 bag with it. Can't wait to get into veneering looks so damn fun. That plywood turned out great! awesome build mike!
It will change woodworking moving forward.
Beautiful work mate :)
Thank you!
When I'm joining the veneer I'll usually glue the joint at the same time that I am gluing up the veneer to the substrate (taping the joint from the face side, and leaving the tape in place when in the bag). Just saves you that clean up phase between glueing the leaves together and laying it up. Also guarantees that nothing slips and causes a step in that joint that will prevent the veneer making good contact with the substrate in lay up. I also apply my solid lippings before the veneering, so the veneer covers the lipping joint, and with good colour match it's almost impossible to tell it has been lipped that way. Always enjoy your videos, really nicely made and produced 👍👍👍
Great way to do it!
Bases are over rated French cleat for the win 💁🏼♂️ fancy boy status
French cleat is where it's at
So where would I find this Bent's woodworking stop block? It worked perfectly. lol
You'd have to ask Jason but I'm guessing from the garbage can.
Sharp
Thank you
Nice result and I like the look of the wide home sawn veneers. But I don't understand why it would be called homemade plywood instead of veneered mdf? Is it the thickness of the veneers that makes it a plywood?
Well there are plus involved so it's plywood. But also, a lot of "plywood" is coming with mdf cores these days because it's more stable
Which Bandsaw blade do you use to resaw? It seemed to cut super clean and straight.
I use the Laguna Resaw King
slide your banding side to side freates a vacuum doesnt slide around as much
Good tip
Who’s the music in this video?
It's from our music service. I'll ask my editor.
Awesome video. Though please wear a mask, especially with MDF when cutting. Nasty stuff.
Great point!
Mdf. Please wear a mask at least when cutting. Those fibres are not good for you.
They're pig hoofs
Why would you use a track saw over a table saw for finished edge?
Which finished edge?