Fabricating the Exhaust for the $113 eBay Turbo on the Chevy Cruze 1.8 Daily Driver Part 2
Vložit
- čas přidán 24. 06. 2020
- Fabricating the Exhaust for the $113 eBay Turbo on the Chevy Cruze 1.8 Daily Driver Part 2
T04e eBay Turbo - ebay.to/2VteXgX
Murdered Out Intercooler Kit - amzn.to/2Mbw8zq
Turbo Oil Feed kit - amzn.to/3exfTc0
Cheap 3" Air Filter - amzn.to/2M7pBWn
Turbo Stud Kit - amzn.to/3eA3wvx
Weld in 02 Sensor Bung - amzn.to/3ezmTFl
$20 eBay Turbo Gauge - ebay.to/2Y26Qe7
2.5" J Bend Exhaust Tubing - ebay.to/2znLsFK
Oil Catch Can - amzn.to/2XdvYh5
2.5" BOV Flange / Pipe - ebay.to/2x6UPcj
HKS Murdered Out BOV - amzn.to/3cgj324
Universal Exhaust Kit 2.5” - amzn.to/2XGyWtp
FlowMaster FX 2.5” - amzn.to/2Xbl9Mt
Cheap Hi Flow Cat - amzn.to/36EKq4K
AEM X Wideband - amzn.to/3gCfUgm
HP Tuners - amzn.to/2XF2mbn
Be sure to follow me on Facebook and Instagram...
► / matthew.chevalier
►Instagram - @matthewchevalier
🔔 Subscribe and hit the bell to support me and so you don't miss a thing!
Something to note: Keep in mind that I'm just a normal guy who loves cars. I'm not a trained mechanic, although my father was. If something interesting car wise comes up, I try to film it and upload it for entertainment and the "look at what I done" factor. Pat me on the back, or give me a "good game" pat on the butt. These videos are meant to inspire other DIYers. Working on cars can be dangerous, even life threatening, if the proper cautionary measurements aren't taken. You also run the risk of damaging your vehicle and or voiding your warranty. If for any reason you feel like the job is too big to handle, I would suggest consulting with a professional mechanic.
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support! - Jak na to + styl
Moving right along! Exhaust done. Next it's the intercooler and charge pipe! Be sure to subscribe and hit the bell icon so you don't miss out.
Any tuning needed for the turbo ?
Or was it just slapped on like in the part 1 video
@@youngrequest1060 In the later videos I started tuning and was running 8 psi of boost with spikes around 10. It does require tuning with Hp Tuners, at least for my application.
So I drive a 2015 Sonic 1.8L and this isn't helping me not put a turbo in it... How many miles were on your Cruze before you started the project?
@@beans356 LOL, you should go for it. 5-8 psi all day on the stock engine would be fine. Mine had 122k. I put 2k miles on it before I realized I didn't set the PCV up correctly.
The human mind cannot comprehend how little interest I have in a Chevy Cruze, but your videos are awesome! Subscribed
Thanks! I appreciate it.
I know right lol. I had one for a rental last year and it wasn’t a terrible car , quite comfortable actually.
@@Firebird400 They do handle and ride quite nice for a compact car.
Same man! And I've subscribed too! 😆 Keep up the great content, btw, Matthew!
Those welds gave me the goosebumps lol
lol...welds look like a box of nerds
Just found these videos and I love them
Thanks JJ! A lot more to come!
Sounds good, I'll be staying tuned. Keep up with the good content, I wish you CZcams success, your videos deserve it
@@JJ-jq9sk Thanks! I really appreciate it.
Ran into one of these videos and promised I ended up watching most of them in a few days. Talented dude here.
Thanks, Earl! I really appreciate it. Thanks for the support.
Idk how I found these videos and I don’t own a Cruze but you just got a sub! Keep up the good work man!!!
Thanks! I appreciate it.
Nice fitment! Sounds louder than I expected. Pretty beastly.
It definitely has a really nice sound.
I'm a new subscriber and already love this channel. You need more subs
Thanks! I appreciate it. I'm sure they'll come as more content is posted and the channel is discovered.
This is awesome def subbed great vids bro
Appreciate it!
Using the marker as a tape, love it. Great content btw, sub'd
Thanks for the sub!
I just saw this right now and my car sounds like that , it’s crazy how some mods your making are similar style , that’s dope🤙
That's awesome! Did you see my latest video where I did the stainless 3" exhaust?
@@cmattdabrat I’ll check rn
Oh my god man , ya shall invest in some Gas mig welder , never the less nice videos man really love your channel so far 👌🏻👌🏻
Thanks! Got a tig welder for next round. Tired of the bb's lol
Just use gasless wire and it's fine though
You should check out the aero turbine/ jones turbine straight flow mufflers, they sound amazing and deep on 4cyl cars, no rasp. I've ran one on my cavalier and on my cobalts ss and they sounded amazing. My buddy even ran one on his civic and it was just as deep sounding on his car.
Sounds awesome. I'll look into it.
Nice welds. What did you use ? Love to try this now with my vehicle. Great video. Nothing like the sweet sound of success
Thanks! Just a cheap Harbor Freight flux core mig.
Top mano aqui no Brazil não tem muitos projetos assim
I'm not sure what that say, but thank you!
@@cmattdabrat Translation: "Awesome bro, here in brazil we dont have this kind of build"
When I drive me wife's Chevy Cruz. I don't shift until I hit 6500. Or so I wanted to hear that thing bang second on limiter.😁🤘
LOL! Too funny. I hope she doesn't know that.
@@cmattdabrat 😂 yeah.! I only do that when she's not in the car.
Wow there were a lot of exhaust leaks there. I have the same model, I'm curious to see how much boost/power you can make before blowing the pistons.
We're about to find out!!! :)
Same. '12 LS manual.
@@jay1185 This is very much uncharted territory so, let's make this happen!
Me too. Would never do this...but super curious to see how it goes.
Some of the ugliest welds but good job man great video and cool project
Thanks! Yeah, flux core mig welding is the worst.
have you got biltema's welding machine which sounds just like starwars
Wait, what?
as a mechanic i like u bein diffrant with ur cars but i would hate to service it how bad is it to get the oil filter out?
I'm currently fully building the engine. I'm addressing that issue by turning the turbo the other way.
What's all wet on the ground under the engine oil or is that a stain on the concrete
Probably oil or coolant when I was draining the fluids, and accidentally knocked into the pan.
what brand turbo is that? looks like my maxpeeding t04e just curious cause I also spent about $115 shipped LOL Gonna go on my 2.5L Sentra SER SpecV
Maxpeedingrods turbo! Check out my latest video. Even though they're cheap, they're great! Like Tony the Tiger.
So how much have you spent so far other then 113 for the turbo.? And included with the turbo.
At, what I'm calling Stage or Phase 1, $1,300, all in. Most expensive part was HPTuners. That alone was half of the expense.
What check engine codes did the dash pop up and how did I fix them? Currently planning out my project to do this to my car
It was the downstream sensor code. P0141. The fix is to extend the sensor out of the stream some to trick it into thinking the exhaust flow is the same.
@@cmattdabrat gotchu. I appreciate it man. Stay strong 💯
👍🏾👍🏾
I appreciate it
all your work is impressive, but those welds though...
Thanks. Cheap flux core mig... lots of bb's
First mod my turbo Cruze is getting is muffler delete!!!!
I enjoy the sound of no muffler on a turbo car. You can probably see the progress as things go more race oriented. Still a street car, but at some point, this thing will be stripped, and all weight moved before the front wheels (fuel tank, exhaust, etc).
Sooo I just spent 3000 dollars on my 6000$ shit box Aveo turbo here we come 1.6L probably gunna blow it up but gives me a reason to put a big block in it 😂
lol, wouldn't be the first compact car V8 conversion I've done.
awful welds but good content respect
The next exhaust will look nicer. FLUX mig welding is the worst. lol. I have a tig this time around. Can't promise you they'll be instagram pretty, but definitely a step up.
Wow flux core is hard to look at lol
Tell me about it. Looks like I threw a boxes of nerds at it.
How long before the cruise is complete
I'd say a week or two. Just waiting on the machine shop to finish the work, and trying to get my shop situated.
I'm here waiting like your work, I'm going to strip and tear down my ride as well it's a bigger job but I get it down just want to port the head, manifold and intake cleaner it up a bit in side and put it back together.
I'm going to take out my interior and sound seal it after I clean it first is working on housing. I'm a father of three but where making it the best we can.
Any way to build views I really want to try and build my CZcams channel and get paid.
factory injectors?
60# currently, but moving up to 114# 1200cc injectors.
Haha for some reason I get some mcconaughey vibes from you
Lol, thanks. I’ll take it. Some first name and our last names sound very similar. My last name is pronounced (Shu-Val-Yay).
@@cmattdabrat no,you look similar...it isnt the name bruh,chicks must dig you ~~~
@@trillrifaxegrindor4411 lol, thanks.
Did you finish this?
Definitely. Keep watching the series and you'll see where it's going.
@@cmattdabrat LOVE IT :)
@@PWinmusic Thanks, lots more to come. Just waiting on the engine to get out of the machine shop. lol
A turbo’s worst enemy is a catalytic converter. I’m from Florida so we don’t do emissions or anything but man, I hope the cat is just temporary. You lose sooooo much power having the cat
Some truth to that. Guess it depends on if a few horsepower more is worth the smell of gas coming out the tailpipe. I've ran cars both ways. Being that this is a daily, I didn't want the smell.
I'm wondering if that turbo will blow up since its from eBay 😂
LOL... they're journal bearing turbos, which aren't too difficult for the Chinese to manufacture. There's plenty of side by side videos on CZcams the show the difference, if any of these Garrett clones. People have gone 3 years beating on them, and they hold up great. Just check out the boostedboiz channel.
@@cmattdabrat what's the best cheap turbo you recommend for a v8 🤔
@@sniperlife125forlife2 That really depends on your power goals, cubic size of the V8, and RPMs you want boost to kick in at.
How much hp
Never dyno it. But estimate around 200hp to the crank.
kinda jealous tbh, mine doesn't pop at all at 2-3k rpms 😞
Is your exhaust still stock?
Matthew Chevalier nope. took out the resonator and Muffler, i'm about to go catless soon, though i'm worried that, that little bit of pressure from my cats is what let's me pop :/ i only pop around 3k-4k since my limiter is at 4k.
@@dufflebagboyz813 It'll probably make it have more of the turbo turbine sound. I'm going to go check your videos and see what you're talking about.
@@dufflebagboyz813 I see what you're talking about. Have you seen the ZZP video of the Sonic world record run? Theres has a similar sound. Might just be the nature of the 1.4?
Matthew Chevalier lol i have the 1.8L like yours except mine is manual, but no i'm not familiar with it but i'll watch it right now :)! and do you think it might be because yours is a manual ? since yours redlines so to speak
That exhaust 🤢😂
lol... flex welds look like a box of nerds.