Dee Mr Awesome Awesome & you are very welcome. Thanks for watching! Let us know if you have any questions. Please subscribe to the channel and turn on your CZcams notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
I was doing some baking and then the oven started clicking and the light was flashing inside the oven. What needs to be cleaned to stop the oven from making clicking noises?
I didn't know what caused the clicking but as I started cleaning the igniters the clicking slows down progressively then as I continued cleaning it completely stopped. Just like magic! Thanks for this video
dossube Awesome Awesome & thanks for watching! We are happy to hear you got your cooktop back up & running. Let us know if you have any questions, we are here to help! Please subscribe to the channel and turn on your CZcams notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Awesome, and thank YOU! A+ to you for making it a DIY project. Saving money is a great feeling, you can put that $300 towards something more meaningful. 😎👍🧰
Richard Hayes Awesome Awesome & thanks for sharing your thoughts. We appreciate it. Let us know if you have any questions, we are here to help! Please subscribe to the channel and turn on your CZcams notification Bell 🛎 that would be awesome thanks again Richard. 😎👍🔧🔩
Did all this and mine still kept clicking when turned down to simmer. I had to take out the gas jet, the little brass nut down in the center, and ream it clean with a sewing needle. Just a tiny bit of debris in there means there is not enough gas flow to keep the burner lit when turned to low setting....the igniter senses the lack of flame and tries to constantly relite the burner.
Ed Smith Thanks for watching, we appreciate you sharing your experience Ed. Your info is helpful & will come in handy for future viewers. Definitely let us know if you have any questions. Us fellow DIY’ers need to stick together! 😀 Many more helpful videos to come! Please subscribe to the channel and Ring your CZcams Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
It might be the problem but it might not be be. My problem ended up being a faulty wiring harness. I figured this out after cleaning, replacing all of the igniters, and the igniter relay. My 13 year old stove is almost brand new!
Thanks for watching & we really appreciate you sharing this Robin. Sounds like it’s now ready to work for another good 13 years. We can only imagine how much you’ve learned on your unit over the time of working on it. Great job & again, we appreciate you sharing this. This will be helpful to future viewers. Hope all is well, enjoy your weekend Robin. 😎👍🔧🔩
We are happy to help, and thank YOU as well. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
After my cleaning service cleaned the stove top, all the ignitors started sparking. They did not before cleaning and there is no corrosion or dirt buildup. I switched off the circuit breaker and left if off for about an hour and then reset it. All the ignitors still are sparking. Could water or cleaning solution be causing the issue
Thanks for watching & welcome to the DIY Raptor Club. Surprisingly, it can take a few days to fully dry out depending on how much cleaner was used. Some find it best to unplug unit for a day or two. 😎👍🔧🔩
Ernesto Flores Thanks for watching, keep us posted on your project. Please subscribe to the channel and Ring your CZcams Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Is it safe to still cook on mines have been doing this for a long time it’s thanksgiving and i always get anxiety when I cook on it they are supposed to send us a new stove but we haven’t got it yet 🤦🏾♀️ is it still save to use even though the oven ticks while it on
Thanks for watching & some say yes, some say no...it’s kinda personal preference from here... Welcome to the DIY Raptor Club. Let us know if you have any questions, us fellow DIY’ers need to stick together. Enjoy your day. 😎👍🔧🔩
Christine Montano Thanks for watching & sharing your comment! That is absolutely a great idea. Cutting all electrical power from unit is a safe idea! Please subscribe to the channel and turn on your CZcams notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
I have got a Smeg 5 burner that is sparking continuously on all 5. I have cleaned the igniters with rubbing alcohol and the burners with a mixture of vinegar and bicarbonate of soda, but still it sparkes continuous. what can I do, apart from calling a electrician?
Marianne Smit-la Croix Thanks for watching & sharing your experience. The next troubleshooting step we recommend looking at is your actual Ignition Switch’s. These are located underneath your knobs. You will need to carefully remove knobs & clean all switches. Over the years of cooking, these little switches can gather food particles, dust, & corrosion...ultimately causing your cooktop to degrade. Keep us posted! We actually just did a video on this 3 days ago & it’s in the editing process. Once we upload it, we will share a link with you! Please subscribe to the channel and turn on your CZcams notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Marianne Smit-la Croix We are reaching back out to you because we mentioned we would share our Cooktop clicking troubleshooting videos with you. We just uploaded a video & there will be a few more to come. Below is a link & we hope you find this helpful! czcams.com/video/JaidSxKXH5E/video.html 😎👍🔧🔩
Marianne Smit-la Croix We just uploaded our tutorial video on our new Cooktop. Lots of fun DIY CZcams filming going on @ our place to help our viewers! 😎👍🔧🔩 czcams.com/video/imtd_U5SAWI/video.html
I hope you can help me. I have a brand new Bosch stove that has all the 5 burners clicking after one of the burners is lit. I tested all 5 burners individually and they all light up but the ones that are NOT lit keep clicking. HELP!!!
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. Thanks for sharing your experience. A brand new unit shouldn’t be giving you any fuss…🤔…that’s a bummer you’re having issues. Does your new unit require you to turn the ignition button or knob to a different setting/position after burner ignites? Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
Dan Thanks for watching & sharing your experience. Great question & this is very common. Anytime you experience this, it’s most likely your Spark Module. Below is a link to our step-by-step video showing replacement of Spark Module. czcams.com/video/oUGNfXS71aA/video.html In the event that it’s a single burner clicking, it’s almost 100% of the time your Ignition Switch for that specific burner. Below is a link to our step-by-step video that shows replacement of a single Ignition Switch. czcams.com/video/pZIgLsxRiCs/video.html Keep us posted, we are here to help! Please subscribe to the channel and turn on your CZcams notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
In the end it was easy! The knobs are fixed to the stems with a grub screw so they can't come off. grab one knob pull it up and towards yourself. this seems to make some sort of short circuit and it stops happening. stove works again like normal! Problem fixed! 8
Marianne Smit-la Croix Awesome Awesome & thanks for the update. That’s great to hear Marianne! Let us know if you have any additional questions, we are here to help! 😎👍🔧🔩
Uhmm what if all the clickers sound at the same time... my housemaid tried cleaning it i suspect she used way too much water but dont take my word for it... thing is when I plug the stove all 6 clickers start clicking albeit slower than when you press the knob to ignite a burner any ideas?
Clearjab Thanks for watching & sharing your experience. Let’s get this figured out. A few things come to mind. 1. Spark Ignition Your spark ignition is in charge of starting the Spark process...if it fails, all burners will click. 2. Spark Module Your Spark Module is in charge of controlling all spark sequences & if it fails...you will experience miscellaneous sparks on different igniters...& sometimes all igniters. Replacing both parts should definitely get your stove top up & running properly & efficiently. Keep us posted! Please subscribe to the channel and turn on your CZcams notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Thanks for replying so fast ill look into it asap cause the clicking drives me nuts its an lg model but lg support in my area is laughable at best might have to bring the DIY out in me
Clearjab 😃 there is a DIY in all of us 😆 Definitely keep us posted! If the replacement parts start adding up close to the cost of a new burner, you may even consider a new burner come Black Friday/Holiday deals! Definitely an option to keep in mind! 😎👍🔧🔩
This is also my problem. I cleaned it I think I used too much water while cleaning because the clicking noise didn’t start till I cleaned my stove. Not sure what to do at this point I unplugged it
What if it wont stop clicking even if your not turning on the ignition? But it is plugged. Should i clean also the internals? Mine keeps clicking even if your not touching the switch.
Thanks for watching & if something was recently spilled on cooktop, you will need to clean igniters. If system is still clicking after you clean it, you may need to just wait a few days for any remaining hidden moisture to evaporate and dry.
Thanks for watching & it may be the igniter or your actual Spark Module. Below are links to videos that may be helpful. 1. Ignition Replacement czcams.com/video/pZIgLsxRiCs/video.html 2. Spark Module Replacement czcams.com/video/oUGNfXS71aA/video.html Keep us posted. 😎👍🔧🔩
Our stoves have a feature called auto reignition, it is able to sense the presence of flame and if it knows the gas is on but no flame is sensed it will trigger a spark again. It senses the spark by the increased electrical conductivity of the flame. It senses this between the spark tip and the flame port right next to it. That means if the flame port is clogged or the spark tip is corroded/gunked up with debris it will not be able to correctly sense the presence of the flame. To fix this clicking issue you need to check two things on every burner. 1. That the spark tip is clean, like this video shows. 2. That the gas ports/flame guides nearest to the spark tip are clean (this was my issue, I had to disassemble and run a drill bit through the tiny holes to clear out the blockage) If that doesn't work, then could be something wrong with the igniter electronics.
Hi Michael I did cleaned the part but it was only with acetone.. I have let it dried and still does click ... although the clicking has slowed down... what should be my next step
Ignacio Rodriguez Perez Thanks for checking out the video and sharing your comment. Let’s get this figured out! 😀 It’s now time to focus on the igniters themselves. It’s very possible that the igniters will need cleaning. Below is a link to a video that shows the step-by-step process of cleaning igniters...definitely check it out. Keep us posted. Please subscribe to the channel and turn on your CZcams notifications that would be awesome thanks again! Below is link to video 😎👍. czcams.com/video/UL_DaKdC51k/video.html
Well lady I did watch this video previous hence my previous comment... however, I went ahead and did a complete cleaning from under and behind the stove, connectors and everything; let it dried and now it stop...problem solve. thanks anyway for your response. ;)
Ignacio Rodriguez Perez Awesome Awesome that’s great news! Thanks for the update. We appreciate you taking the time to reach out to us. Let us know if you have any additional questions along the way! Don’t forget to subscribe to the channel! 😎👍
I had a bad spill on my stove and it has been clicking for 24 hours. We tried cleaning it and dryed it. It clicks rearly but the bottom stove part will not turn on , it lights up for a second and then nothing happens. :(
Higher Self Thanks for watching & sharing your experience. This is more common than you think. Let’s get this figured out together! It’s very possible that the spill that was added to the igniter on that specific burner is causing an interference with the igniters electrical connection. We recommend cleaning the igniter & then getting it lit. You may have to manually light the burner with a lighter....Be extremely careful. Once it’s lit, allow the burner to burn for several minutes...it may take up to 25 minuets or so to allow that burner to burn off any additional particles in order to allow the electrical current to work properly & efficiently again. Let’s start there! Keep us posted! Please subscribe to the channel and turn on your CZcams notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Barbara Evanger Thanks for watching, we hope the video helped! Please subscribe to the channel and turn on your CZcams notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Thanks for watching & depends on who you ask. For us, any sounds or things happening to your cooktop that are not normal will lead to further damage. We recommend cleaning or replacing part sooner rather than later. Hope this helps. 😎👍🔧🔩
Thanks for this video
Just bought a house and the stove is clicking!
I hope the video you made helps me!
Will update
Dee Mr
Awesome Awesome & you are very welcome. Thanks for watching! Let us know if you have any questions.
Please subscribe to the channel and turn on your CZcams notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Just followed the action you did and solved my problem. Gas Mechanic had two attempts and failed, so far looks good, thanks 😊
Awesome, thanks for watching & sharing this Alan. Enjoy your weekend.
😎👍
I have that’s sound but it’s coming from the bottom part of the oven and it stops if u have the Temperature at 425 or up
I was doing some baking and then the oven started clicking and the light was flashing inside the oven. What needs to be cleaned to stop the oven from making clicking noises?
I didn't know what caused the clicking but as I started cleaning the igniters the clicking slows down progressively then as I continued cleaning it completely stopped. Just like magic! Thanks for this video
dossube
Awesome Awesome & thanks for watching! We are happy to hear you got your cooktop back up & running.
Let us know if you have any questions, we are here to help!
Please subscribe to the channel and turn on your CZcams notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Thank you! You saved us a $300 service call for our stove. We owe you $300!!!!
Awesome, and thank YOU! A+ to you for making it a DIY project.
Saving money is a great feeling, you can put that $300 towards something more meaningful.
😎👍🧰
Good video. Clear and simple.
Richard Hayes
Awesome Awesome & thanks for sharing your thoughts. We appreciate it. Let us know if you have any questions, we are here to help!
Please subscribe to the channel and turn on your CZcams notification Bell 🛎 that would be awesome thanks again Richard.
😎👍🔧🔩
Giving me confidence to fix it on my own. Thanks Michael
You are very welcome Cheryl, please keep us posted on your DIY project. Looking forward to hearing back from you.
😎👍🔧🔩
Did all this and mine still kept clicking when turned down to simmer. I had to take out the gas jet, the little brass nut down in the center, and ream it clean with a sewing needle. Just a tiny bit of debris in there means there is not enough gas flow to keep the burner lit when turned to low setting....the igniter senses the lack of flame and tries to constantly relite the burner.
Ed Smith
Thanks for watching, we appreciate you sharing your experience Ed. Your info is helpful & will come in handy for future viewers.
Definitely let us know if you have any questions. Us fellow DIY’ers need to stick together! 😀
Many more helpful videos to come! Please subscribe to the channel and Ring your CZcams Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
It might be the problem but it might not be be. My problem ended up being a faulty wiring harness. I figured this out after cleaning, replacing all of the igniters, and the igniter relay. My 13 year old stove is almost brand new!
Thanks for watching & we really appreciate you sharing this Robin. Sounds like it’s now ready to work for another good 13 years. We can only imagine how much you’ve learned on your unit over the time of working on it.
Great job & again, we appreciate you sharing this. This will be helpful to future viewers. Hope all is well, enjoy your weekend Robin.
😎👍🔧🔩
What should you do if turning on a single burner causes all of them to click (regardless if the other ones are on or off)?
Baking soda and vinegar is a mixture that makes no sense. The baking soda is basic and the vinegar acidic and they will neutralize each other.
Thanks for watching and sharing your thoughts David.
@@DIYwithMichaelBorders Agree 100%. This is high school chemistry.
@@dr.sandorjworen8560
Thanks for watching.
Thanks! I hope this resolves my issue. Very easy instructions.
C Damato
Thanks for watching. Definitely let us know. Us fellow DIY’ers need to stick together! 😎👍🔧🔩
Thank You 🙏🏾!!!
We are happy to help, and thank YOU as well. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
After my cleaning service cleaned the stove top, all the ignitors started sparking. They did not before cleaning and there is no corrosion or dirt buildup. I switched off the circuit breaker and left if off for about an hour and then reset it. All the ignitors still are sparking. Could water or cleaning solution be causing the issue
Thanks for watching & welcome to the DIY Raptor Club. Surprisingly, it can take a few days to fully dry out depending on how much cleaner was used.
Some find it best to unplug unit for a day or two.
😎👍🔧🔩
I’ll try that pretty cool video thanks
Ernesto Flores
Thanks for watching, keep us posted on your project. Please subscribe to the channel and Ring your CZcams Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Is it safe to still cook on mines have been doing this for a long time it’s thanksgiving and i always get anxiety when I cook on it they are supposed to send us a new stove but we haven’t got it yet 🤦🏾♀️ is it still save to use even though the oven ticks while it on
Thanks for watching & some say yes, some say no...it’s kinda personal preference from here...
Welcome to the DIY Raptor Club. Let us know if you have any questions, us fellow DIY’ers need to stick together. Enjoy your day.
😎👍🔧🔩
UNPLUG it before working with it. This was not stated in the directions.
Christine Montano
Thanks for watching & sharing your comment! That is absolutely a great idea. Cutting all electrical power from unit is a safe idea!
Please subscribe to the channel and turn on your CZcams notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
If people don't have common sense as to turn power off they need to not be working on appliances
Mine is gas. No power. How?
@@CdLobo There is power to the igniter. Under the cooktop it will be plugged into an outlet.
Can I use a commercial anti-rust spray instead of the homemade baking soda?
Thanks for watching, we haven’t tried that in the past...🤔...can’t give you a 100% confident answer.
I have got a Smeg 5 burner that is sparking continuously on all 5. I have cleaned the igniters with rubbing alcohol and the burners with a mixture of vinegar and bicarbonate of soda, but still it sparkes continuous. what can I do, apart from calling a electrician?
Marianne Smit-la Croix
Thanks for watching & sharing your experience. The next troubleshooting step we recommend looking at is your actual Ignition Switch’s. These are located underneath your knobs.
You will need to carefully remove knobs & clean all switches. Over the years of cooking, these little switches can gather food particles, dust, & corrosion...ultimately causing your cooktop to degrade.
Keep us posted! We actually just did a video on this 3 days ago & it’s in the editing process. Once we upload it, we will share a link with you!
Please subscribe to the channel and turn on your CZcams notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Marianne Smit-la Croix
We are reaching back out to you because we mentioned we would share our Cooktop clicking troubleshooting videos with you. We just uploaded a video & there will be a few more to come. Below is a link & we hope you find this helpful!
czcams.com/video/JaidSxKXH5E/video.html
😎👍🔧🔩
Marianne Smit-la Croix
How to remove Gas Cooktop
czcams.com/video/OlosBNa4RFE/video.html
😎👍🔧🔩
Marianne Smit-la Croix
We just uploaded our tutorial video on our new Cooktop. Lots of fun DIY CZcams filming going on @ our place to help our viewers! 😎👍🔧🔩
czcams.com/video/imtd_U5SAWI/video.html
I hope you can help me. I have a brand new Bosch stove that has all the 5 burners clicking after one of the burners is lit. I tested all 5 burners individually and they all light up but the ones that are NOT lit keep clicking. HELP!!!
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
Thanks for sharing your experience. A brand new unit shouldn’t be giving you any fuss…🤔…that’s a bummer you’re having issues.
Does your new unit require you to turn the ignition button or knob to a different setting/position after burner ignites?
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and help us grow an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
I'll be using just one burner, and then 2 others keep clicking for the whole time I'm cooking. Why is this?
Dan
Thanks for watching & sharing your experience. Great question & this is very common. Anytime you experience this, it’s most likely your Spark Module. Below is a link to our step-by-step video showing replacement of Spark Module.
czcams.com/video/oUGNfXS71aA/video.html
In the event that it’s a single burner clicking, it’s almost 100% of the time your Ignition Switch for that specific burner. Below is a link to our step-by-step video that shows replacement of a single Ignition Switch.
czcams.com/video/pZIgLsxRiCs/video.html
Keep us posted, we are here to help!
Please subscribe to the channel and turn on your CZcams notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
In the end it was easy! The knobs are fixed to the stems with a grub screw so they can't come off. grab one knob pull it up and towards yourself. this seems to make some sort of short circuit and it stops happening. stove works again like normal! Problem fixed! 8
Marianne Smit-la Croix
Awesome Awesome & thanks for the update. That’s great to hear Marianne!
Let us know if you have any additional questions, we are here to help!
😎👍🔧🔩
Hi, I have this issue but with a Gas oven. Is the fix the same? Just clean the sparker?
Thanks for watching & it will be. Please keep us posted on your project.
😎👍
Uhmm what if all the clickers sound at the same time... my housemaid tried cleaning it i suspect she used way too much water but dont take my word for it... thing is when I plug the stove all 6 clickers start clicking albeit slower than when you press the knob to ignite a burner any ideas?
Clearjab
Thanks for watching & sharing your experience. Let’s get this figured out.
A few things come to mind.
1. Spark Ignition
Your spark ignition is in charge of starting the Spark process...if it fails, all burners will click.
2. Spark Module
Your Spark Module is in charge of controlling all spark sequences & if it fails...you will experience miscellaneous sparks on different igniters...& sometimes all igniters.
Replacing both parts should definitely get your stove top up & running properly & efficiently.
Keep us posted!
Please subscribe to the channel and turn on your CZcams notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Thanks for replying so fast ill look into it asap cause the clicking drives me nuts its an lg model but lg support in my area is laughable at best might have to bring the DIY out in me
Clearjab
😃 there is a DIY in all of us 😆
Definitely keep us posted!
If the replacement parts start adding up close to the cost of a new burner, you may even consider a new burner come Black Friday/Holiday deals!
Definitely an option to keep in mind!
😎👍🔧🔩
How do I open up the range top? I see no access screws that hold the gas range down.
This is also my problem. I cleaned it I think I used too much water while cleaning because the clicking noise didn’t start till I cleaned my stove. Not sure what to do at this point I unplugged it
WOW! What an ingenious idea! Clean something filthy dirty and it will work properly! Are there any other applications I can use this with?
What if it wont stop clicking even if your not turning on the ignition? But it is plugged. Should i clean also the internals? Mine keeps clicking even if your not touching the switch.
Thanks for watching & welcome to the DIY Raptor Club. A friendly cleaning may help followed by gentle & careful drying. Keep us posted.
😎👍
What to do when all 4 igniters clicking non stop even after trying turning off the main
Thanks for watching & if something was recently spilled on cooktop, you will need to clean igniters.
If system is still clicking after you clean it, you may need to just wait a few days for any remaining hidden moisture to evaporate and dry.
What do you do if it’s still clicking? You managed to get yours to stop. Mine won’t.
Thanks for watching & it may be the igniter or your actual Spark Module. Below are links to videos that may be helpful.
1. Ignition Replacement
czcams.com/video/pZIgLsxRiCs/video.html
2. Spark Module Replacement
czcams.com/video/oUGNfXS71aA/video.html
Keep us posted. 😎👍🔧🔩
Our stoves have a feature called auto reignition, it is able to sense the presence of flame and if it knows the gas is on but no flame is sensed it will trigger a spark again. It senses the spark by the increased electrical conductivity of the flame. It senses this between the spark tip and the flame port right next to it. That means if the flame port is clogged or the spark tip is corroded/gunked up with debris it will not be able to correctly sense the presence of the flame. To fix this clicking issue you need to check two things on every burner.
1. That the spark tip is clean, like this video shows.
2. That the gas ports/flame guides nearest to the spark tip are clean (this was my issue, I had to disassemble and run a drill bit through the tiny holes to clear out the blockage)
If that doesn't work, then could be something wrong with the igniter electronics.
Hi Michael I did cleaned the part but it was only with acetone.. I have let it dried and still does click ... although the clicking has slowed down... what should be my next step
Ignacio Rodriguez Perez
Thanks for checking out the video and sharing your comment. Let’s get this figured out! 😀
It’s now time to focus on the igniters themselves. It’s very possible that the igniters will need cleaning.
Below is a link to a video that shows the step-by-step process of cleaning igniters...definitely check it out.
Keep us posted. Please subscribe to the channel and turn on your CZcams notifications that would be awesome thanks again!
Below is link to video 😎👍.
czcams.com/video/UL_DaKdC51k/video.html
Well lady I did watch this video previous hence my previous comment... however, I went ahead and did a complete cleaning from under and behind the stove, connectors and everything; let it dried and now it stop...problem solve. thanks anyway for your response. ;)
Ignacio Rodriguez Perez
Awesome Awesome that’s great news! Thanks for the update. We appreciate you taking the time to reach out to us. Let us know if you have any additional questions along the way! Don’t forget to subscribe to the channel! 😎👍
Great!!! thank you for your quick responses. I already subscribed to your channel. ;) Greetings!!!
Ignacio Rodriguez Perez
Awesome thank you 😎👍
I had a bad spill on my stove and it has been clicking for 24 hours. We tried cleaning it and dryed it. It clicks rearly but the bottom stove part will not turn on , it lights up for a second and then nothing happens. :(
Higher Self
Thanks for watching & sharing your experience. This is more common than you think. Let’s get this figured out together!
It’s very possible that the spill that was added to the igniter on that specific burner is causing an interference with the igniters electrical connection.
We recommend cleaning the igniter & then getting it lit. You may have to manually light the burner with a lighter....Be extremely careful. Once it’s lit, allow the burner to burn for several minutes...it may take up to 25 minuets or so to allow that burner to burn off any additional particles in order to allow the electrical current to work properly & efficiently again.
Let’s start there! Keep us posted!
Please subscribe to the channel and turn on your CZcams notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
DIY With Michael Borders
Barbara Evanger
Thanks for watching, we hope the video helped!
Please subscribe to the channel and turn on your CZcams notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
You should have shown how you cleaned it
GregB gregb
Thanks for watching. Let us know if you have any questions. 😎👍🔧🔩
Do you have a video if it clicks when off?
Thanks for watching & not at the moment...
does it cause anything bad if you dont stop it?
Thanks for watching & depends on who you ask. For us, any sounds or things happening to your cooktop that are not normal will lead to further damage. We recommend cleaning or replacing part sooner rather than later. Hope this helps.
😎👍🔧🔩
Mine clicks even with all the burners off. What should I do?
Thanks for watching, you may want to unplug unit & allow it to sit overnight. Keep us posted on how it works tomorrow.
😎👍🔧🔩
Same issue im having
Did the unplugging work
@@blissfulgoddest5430 did it work ones u turned it off ?
What does one part and 3 part mean..we don't speak that language
Really? Cleaning solves this problem? I think it was something to do with electricals, and power-cycle fixed it, not your cleanup
Thanks for watching & sharing your thoughts. It may not work for everyone. Hope all is well with you.
😎👍🔧🔩
could have done without the ridiculous hero music, it is just appliances, not the fate of the cosmos. nice video otherwise.