Range/Oven Troubleshooting | Igniter Keeps Clicking or Sparking | PartSelect.com
Vložit
- čas přidán 22. 10. 2019
- This video will take you through the basic steps you should take if you notice that your gas range's ignited is clicking or sparking!
Steve will explain how the spark ignition system works, the components involved (and how to find them), and what the most likely cause of this system!
Here's what you need to know:
(0:34) Important Components Involved (and where they're located)
(1:13) Troubleshooting This Symptom
(1:48) How to Determine If You Have a Bad Switch
(3:17) How to Test Individual Switches for Continuity
(4:12) Common Causes of Damaged Switches
How to Use Your Multimeter to Test Continuity: • Appliance Repair: How ...
More Range/Oven Troubleshooting: • Range/Oven Troubleshoo...
*****************
Find this video helpful? Hit the LIKE 👍 button, and don’t forget to SUBSCRIBE to our channel for more help with your appliances!
Leave us a comment below and let us know what video YOU would like to see us do next or ask a question about your appliance!
More Range/Oven-Specific Repair Videos can be found on the Range/Oven Repair playlist on our CZcams Channel: • GE Oven/Stove/Range Hi...
For more help diagnosing your Range/Oven problems, or to find an instructional video that is specific to your model, visit our website at www.partselect.com
At PartSelect.com, we have thousands of replacement parts for a variety of household appliances. We specialize in OEM (Original Equipment Manufacturer) parts, so you can rest assured that your part will fit with your model appliance.
PartSelect.com is committed to providing you with high-quality parts, quickly and easily. Buy with confidence by learning about our Same-Day Shipping, Secure Shopping, and 30-Day Return Policy on our website.
www.partselect.com/Same-Day-S...
www.partselect.com/Thirty-Day...
www.partselect.com/Secure-Sho...
At PartSelect, we’re here to help at every stage of your repair. Our friendly Customer Service Representatives are happy to help with any questions you have about your repair, your appliance, or your replacement part. Visit our website to try our new LIVE CHAT feature or speak to one of our representatives over the phone at 1-888-260-4310.
Visit Us on Social Media!
/ partselect
/ partselect
www.pinterest.ca/partselect/ - Jak na to + styl
At last!.. so many of these YT videos claim it is 'just' cleaning around the spark sites... none address the switching (misalignment) problem except you! I looked under the know of the offending gas tap and sure enough that particular switch was slightly off compared to the others. I moved it back just a touch and only click once now. I have put up with this for years. Grateful. I even know how to replace the switch set and loom now if it happens again.. Dread to think of a call out fee and then the engineer condemning our otherwise spotless 24 yr old hob for £13 part
Well done, very helpful. Finally an explanation of how it all works and how to fix. Thanks
You are the most thorough video I have seen
One of the best DIY appliance repair video's on CZcams. Well done sir.
Saved me $110 for a service call. Thank you 😊
On my Maytag gas stove when i turn on one burner all the igniters come on each or the burner behind any thoughts Steve ?
Thanks for the video... I was able to fix my igniter based on the instructions given !!
my first impression of this video was. what a nice guy! And in the end the video helped me out tons!! thanks a lot!! god bless you and your family
Thank you. That was incredibly helpful. I think it would be more helpful if you recorded the process of removing the panels, but I should be able to wing it.
Also, I like you, mister, you have a kind face.
I was able to get igniter to stop sparkling by cleaning the tips with sand paper. Hope this helps some folks that run into this problem.
You sir helped me a lot. I wish you well
Great tutorial
Thank you. I removed 4 switched and put it in a jar with alcohol and salt like cleaning a bong) and shaked it a lot. Than I put it under close to running faucet and finished off with a carb cleaner. They started working like new no more click
You guys are the best
I had a pot of water boil over, making the igniter wet, causing constant sparking. I used Gumout Cleaner and Degreaser spray inside the square igniters. The spray drys quickly, and the sparking stopped.
+PartSelect One of mine is ticking and has spark but won't fire up. . could it the switch that is bad ?
THANKES. VERY INTERESTING AND DEMONSTRATING VIEDO.
What should I do its clicking even if the gas stove is turned off??
Great video. Thank you so much. I have the exact problem that you mentioned, the cooktop keep clicking even I disconnected from the igniters.
You're welcome!
what a great video
Hi, i have a 14 year old bosch cooktop that has experienced constant clicking when the knobs are in the off position. i've cleaned the igniter electrodes with rubbing alcohol (worked briefly) and more recently with contact cleaner/sandpaper and they are working for now. i can't remove the burner hex bolts so i can't get underneath to diagnose/replace parts. any suggestions (beyond penetrating oil and don't force them) for removing those hex bolts? thanks
thankyou, switch was the problem.
Soaking the wiring harness in rubbing alcohol worked like a charm.
I have a Viking range/stove and it clicks every single time I turn it on. How do I remove the metal plate to reach the switches? Thank you.
you have to pull every dial and remove the screws, every one behind all the knobs. then the face comes off
I have a Samsung Range and the spark ignition switch has three wires,black red and blue,how can I test it to be able to know that it is working.
At 01:25, you say the igniter switches are the input to the spark module; isn't it instead the module that powers the igniters? It seems backwards.
The switches do power the module, which in turn powers the igniters.
Amazing. 88ACB 1 igniter wouldn't setup. Watched this video. Repositioned switch module with screwdriver without even remove surface top. Turned power back on. Problem resolved. Thank you. Subscribes and liked.
try using a hair dryer before taking things apart. after washing down the top mine kept clicking. the hair dryer fixed it in a few seconds
Every time I clean my has top, it started to constant sparking for one day and then go off itself. Now I learnt that water must be shorting the switch for a day. Thank you for an easy explanation.
"you will need to replace them" evil smile. (Ch Ching) Lol
👍
Thank you my stove was driving me crazy
3:50 -- If igniters spark with all knobs turned off
Igniter on maytag gas stove too slow ,lites with a puff. small explosion. burns holes in all my wife's shirts and blouses, getting expensive. Any way to have ignition start before gas starts flowing.. Warranty tec guy less then useless ,
i did something stupid, i was cleaning under the igniter caps and it was loaded with food and grease. I attempted to use a sponge but it might have dripped off some water, so i sprayed a couple small squirts of kaboom degreaser just on the white parts and then they started clicking, constantly, the 1st knob was sparking and i couldn't stop it and then we unplugged the stove.. I used a qtip to finely get all the areas but i might have burned it out, its been an hour and the house was smelling like gas so i'm scared to turn it on. Its a GE profile, what should I do?
My wife did the same thing and I’m trying to figure it out now. What do you end up doing?
If you're not hiring out for the repair, carefully remove the affected igniter module. Depending on your scenario you may only be down one burner minus the clicking until you can properly resolve the issue...
terrible background noise (music) and poor explanation of troubleshooting