STIHL MS171 MS181 Oil pipe replacement

In this video I will show you how to fix an oil leak by replacing the oil pipe on an MS171/181 STIHL chainsaw. I accept no liability for anything you do as a result of watching this video.
Thanks for watching and please leave a comment if this helped you. Thanks to my children for helping make this.
Please don't forget to click like and subscribe, also let me have any comments and thanks for taking time to watch.

[@chasjm21]

Great video, very easy to follow, got a new pipe for a few pounds & job done in no time. Thank you.

[@peterjackson3900]

Thanks for the video, we'll put together and easy to follow. Just completed fitting a new oil line and filter. It's on the cardboard overnight, so fingers crossed. Thanks again.

[@vikingthor8060]

Thanks guys just done this with my saw, following your instructions, my only tips are use the end of a tooth brush to seat the pipe as it has no sharp edges. and if your short of a funnel cut the tip of a milk or squash bottle to use. thanks again

[@michaelrimmer5918]

Thanks Austin. I thought that I would have to remove the fuel vent and the handle to change the line but no. Well done.

[@themoth4137]

Excellent and succinct. I found it quite tricky getting the handle back in place.

[@jimg3033]

Thanks !!

[@thebackstagewatcher7364]

Thank You so much for that vid! I got the same saw and the same problem. Thumb up!

[@x5dpt]

Nice, sorted my chainsaw out,thanks!

[@hughjanus4371]

Useful video thank's, if you unscrew the spring that covers the oil pipe it will give you loads of room.

[@gillyhennessy7637]

Great tip "unscrew the metal spring, it comes off of the handle allowing good access to the oil pipe. Easy once you know how .
Thanks for video & tips in comments below.

[@englishclive]

Thanks mate, nice simple explanation.

[@doug.campbell]

Well done, I'll try this now.

[@johnclarke6647]

FYI, I always put a little 1184 gasket sealant on all oil lines that go in an oil tank. This insures they do not leak in the future. I just put a little on the grommet sealing surface. It also helps it to go into the tank. I do the same thing on fuel lines that go into gas tanks. It keeps them from leaking, too.

[@peterscaffidi5977]

John, is this the 1184 sealant you were referring to in your comment? www.amazon.com/gp/product/B007TWXI1K/ref=ox_sc_act_image_1?smid=A1TFBK3C7LO58P&psc=1

[@johnclarke6647]

@@peterscaffidi5977 Pete, 1184 is Three Bond 1184. It is good sealant. You can get it off EBay. I use Playtex Moto Seal on clamshells and 1184 on everything else. I seal in grommets on oil lines with 1184 and fuel tank grommets with 1184, too

[@lablover8559]

@@johnclarke6647 Thanks very much for the information and for replying. Ordering some now!

[@idefix2500]

Super Video, vielen Dank, hat mir sehr geholfen

[@roystheboy]

nicely made video well explained

[@abbots69]

very useful video expertly directed can you do some more

[@jasonputtock4428]

where is the fuel breather pipe please.?

[@ryanthethumb]

Is the oil system adjustable for more or less oil

[@austintovey]

No, as the chainsaw runs at max output all the time. So there is no need to adjust this Stihl have designed to optimal flow providing the oiler system is functioning correctly

[@ryanthethumb]

@@austintovey how much bar oil shud It get trough I always thought roughly a tank of oil to a tank of fuel my 171 seems to get 2 tanks of fuel to a tank of oil