Did you weld the air intake from a turbo fender to a regular one just because stock turbo fenders are hard to find nice ones? What turbo do you use? And are you going to run the 606 without open it and change bearings or anything like that? How many KM had that 606 run stock before you got it? Ask because nice to learn from a good builder like you 👍🏼 Love your Mercedes builds they are 100 my taste ❤️🤙
Yes i had a nice fender without rust so easyer to weld in that air intake instead. Hx40 super #16 Yes, un opened engine with just the mods i always do on my engine builds, check previous videos! Thank you! 😊
Where did you get the Hammer-style bumpers and sideskirts? Been looking to get a set for my W124, but the only one I could find so far was a 1000 dollars + shipping and import from the US. Wouldn't be the end of the world, but surely there's guys here in Europe making these as well right? Also, do you happen to know if the rear bumper would clear the factory tow hook?
Здравствуйте. Собираю om 606 на 7.5 плунжерах. Не знаю какие пружины клапанов поставить. Всё ставят от m 113 у вас какие стоят?. И по турбине что лучше будет?
Awesome content all the way from South Africa ❤..... BTW how do you wire up your rpm sensor? And do you use the starter ring gear as a pick up for the rpm or do you use the ecu trigger wheel on the flywheel?.... Thanks
Hello! I have the same car and I'm doing a project but gasoline, what suspension does it have at the rear and what did it need to adapt it, thanks for the help, I'll follow you!😊
Damn, my W124 is a total shitbox compared to yours. If that's not impolite, what budget have you planned to go through the swap and all the parts? I almost spent 10k between parts for the engine, the 722.6, the drivetrain and brakes. And I still don't have the stainless exhaust done Outstanding work 👌
Jonku verran materiaalia kyllä tullu kuvattua, mutta vielä tarttis vähän lisää et sais episodin. Menee kaikki energia kasaamiseen niin ei taho keretä kuvaamaan 😁
I'm so happy to see more videos of you work. Thanks for the sharing !!!!
I waited a lot of time for this episode finally always perfect 💥🇩🇿 can't wait for the next ep ❤️
This w124 is going to be blomppo’s favorite car when it’s ready. I’m sure about that😎
Really nice work, the paint looks really good!
Nice blomppo always top work from you love the paint looks really nice man 😮
Thanks for all the explanation
Clean job !! Well done bro !!
I just saw
“Om60”
And instantly came to see what’s up haha nice work.
Nice work!
Super hype to see you dropping more content!!! THIS WEEKEND I SHOULD BE NABBING A W124 E320 WAGON
Your S124 is one of the best in the world IMO😮
Beautiful car you got there
Good video! 🇸🇪
Amazing work as usual, I would like to buy an S124 you built some day, save me the effort :P
шикарный мерседес получится👍👍👍
Did you weld the air intake from a turbo fender to a regular one just because stock turbo fenders are hard to find nice ones? What turbo do you use? And are you going to run the 606 without open it and change bearings or anything like that? How many KM had that 606 run stock before you got it? Ask because nice to learn from a good builder like you 👍🏼 Love your Mercedes builds they are 100 my taste ❤️🤙
Yes i had a nice fender without rust so easyer to weld in that air intake instead.
Hx40 super #16
Yes, un opened engine with just the mods i always do on my engine builds, check previous videos!
Thank you! 😊
Kul med ny video!
on kyllä herkullisen värinen pitkäkatto! kelpaa kesällä ajella luu ulkona! :D
😍
Hyvvääää👍👍👍👍
Where did you get the Hammer-style bumpers and sideskirts? Been looking to get a set for my W124, but the only one I could find so far was a 1000 dollars + shipping and import from the US. Wouldn't be the end of the world, but surely there's guys here in Europe making these as well right?
Also, do you happen to know if the rear bumper would clear the factory tow hook?
They are from Gup-tuning.ee
Check my previous video!
I dont really know about clearance with the tow hook, i will not use one on this anymore.
@@Blomppo995 Alright, thank you so much!
Здравствуйте. Собираю om 606 на 7.5 плунжерах. Не знаю какие пружины клапанов поставить. Всё ставят от m 113 у вас какие стоят?. И по турбине что лучше будет?
Hi there. Im doing the same conversation to my wagon w124. What engine mountings did you use ? Many thanks and subscribed.
Original om603 mounts and scania rubber bushings. Same ones as in my previous build series
Awesome content all the way from South Africa ❤..... BTW how do you wire up your rpm sensor? And do you use the starter ring gear as a pick up for the rpm or do you use the ecu trigger wheel on the flywheel?.... Thanks
This car had it from stock, but in my first build series i show how to wire it 😊
@@Blomppo995 which episode? 🙈
Cant remember 😂
@@Blomppo995 😂🙈... Ohk no problem I do enjoy watching your content anyways
Hello! I have the same car and I'm doing a project but gasoline, what suspension does it have at the rear and what did it need to adapt it, thanks for the help, I'll follow you!😊
Hi, please watch the previous video.
Hej, hör av dig när den är klar så gör vi affär😂👍🏻👍🏻👍🏻
Hello. What company make your clutch. I dont find that heckblum motorsport?
www.haggblommotorsport.fi/en
Damn, my W124 is a total shitbox compared to yours.
If that's not impolite, what budget have you planned to go through the swap and all the parts? I almost spent 10k between parts for the engine, the 722.6, the drivetrain and brakes. And I still don't have the stainless exhaust done
Outstanding work 👌
Thanx 🙏🏼 i have not really counted, i have a lot of parts laying around and make a lot myself.
Hey dude do you have Abit more info on your scania engine mounts plz?
Febi 05922
Where did you buy AMG bumpers and do they fit good?
Please watch previous video.
as usual it's a dream👌💪😍😍😍but please write PORSCHE 😁😉
Hahah, sorry 😂 fixed!
@@Blomppo995 now everything is perfect 😁 as usual 😂😂😂😉
Hello, do you have the part number for the valve springs?
Send email to: moottorihiomo@hotmail.com
How did you clear the front sway bar with the om606 pan ? Thanks
Straight fit with the 6:cyl bars
@@Blomppo995 So you used the om606 pan and W124 E300 sway bar ? Thanks
Why type of bushings are those red ones?
Watch the previous episodes for all info.
Do you have an instagram that you keep people posted to what you're doing on the car? I think we all need MORE VIDEOS PLEASE ahahaha
Yeah if you watch the video from the begining you probably have seen it 😏
what color code is that?
Google: Porsche Viola Metallic
Koskas uutta videota? Hieno peli kyllä taas tulossa👍🏻
Jonku verran materiaalia kyllä tullu kuvattua, mutta vielä tarttis vähän lisää et sais episodin. Menee kaikki energia kasaamiseen niin ei taho keretä kuvaamaan 😁
Is it going to beat the UIP?😎
It will sure be a hard choice to pick one of them 😮💨
Kazakhstan
Komia väri
swap to 8hp70 😀
More videos