Video není dostupné.
Omlouváme se.
Ram Projectors on any 4th Gen Ram??
Vložit
- čas přidán 3. 08. 2016
- PLEASE NOTE, THIS VIDEO IS OUTDATED! ADAPTERS HAVE BEEN UPDATED TO V2. NEW VIDEO CAN BE FOUND HERE - • RetroShop Ram Projecto...
Short answer, YES!
We have the adapters for this, and they can be found on our website here - shop.retroshop.us/ProductDeta...
Questions?
Website - 💻 www.retroshop.us
Email - 📨 jeremy@retroshop.us
Phone / Text - 📱(314) 669-HIDS (4437)
Just got my lights yesterday and I’m doing the install just in time for Christmas :)
Wish me luck
Nice that you mention the 🇨🇦 DRL's . I don't own a Ram but I do find it interesting to see what you can do to upgrade your truck . I would say go to a junkyard to get the projector headlights . I own a car .
Thank you finally my question is answered!
i just brought this Adapters! i hope they will make me happy!
This works perfectly guys!!
I bought adapters & oem projector headlights for my 2014 ram lonestar..
No problems w/ it thus far & easy assembly..
Great product! Thank you RetroShopLights
so everything works good, I have a lonestar and want to go to the projection. but the dealer said it wasn't possible. also have you done anything with the tail lights?
dealer doesn't know about us ;)
We've sold a LOT of these - and yes, we have adapters for the tails too, as well as the full tail light kit (OEM tails included) on our website - www.retroshop.us
texasking87 yes it works bud easy plug & play
daniel gonzalez where did you buy the projector headlights? I want to get them for my 2016 ram 1500
Yeah I'm looking for a pair on my 1500 Bighorn
Are you able to run hid or LED bulb in the projector with these harness??
where do you typically mount the resistor that gets hot?
I have 2014 Ram 1500. I bought LED 9012 bulbs, because I was told that’s what was the upgrade. Bulbs are too long. Plastic back cover does not close. Are these the correct size? Do I need 2 sets for low & high beams? Yes, they are projectors.
I was wondering if you can make a video installing these projectors on a truck that came with factory quads
I just ordered a pair of the 13+ projector with the PNP connectors
We don't have a video of installing them on the truck. Not much really to it.....remove old lights, plug these in, mount and ground the resistor(s), and done!
I need that big black plug. where would i find it because the one on my factory harness tab broke...
If its just the tab, shouldn't be an issue. these are a very tight fitting plug......
I have a 16 big horn 1500. I just aquired a brand new set of the all black sport light housings built in 2015 with the black shroud which I believe are discontinued. I think on the back it says h1 and 9005 for the headlights in the sport housings. Is this kit compatible with my set up? Also do I need anything besides these adapters like those resistors?
H1? Maybe.....9012 or 9005/9005.......If they are the OEM or TYC lights, I know these adapters will work.
next question
I ordered a 13+ kit from you and I am from Canada... question is can I use just the cable w/o resistors and reprogram at the dealership? thanks in advance
Tamas Princz were you able to reprogram your drl to the signals?
Where can I get a harness to convert from factory projectors to the quad style?Im looking at new headlights and they won’t fit trucks with factory projector lights so I need a harness to go basically backwards.
there is no harness to go backwards.
So I just bought these adapters from you guys, except mine looks different. The resistors are in line and no ground. The conversion worked, the headlights function ok, but the adaptor that connects to the headlight plug on the truck side will not click and lock into place. Is this a common issue? Any suggestions? Thanks
Philly, we had an update on these - just haven't had a chance to update the video. Resistors are different now. Ends are not.....so shouldn't be posing an issue there. Shoot me an email and we can review. jeremy@retroshop.us. TY!
what would you need if you wanted to throw some HIDs on to this set up?
We have HID kits for these as well. All depends on the year of your truck, and.....the bulb type it takes (as there are 3 different types depending on the projectors you have). Best bet, email me with what year you have and the lights you have and we'll get you squared away!
Great video . Where can I buy these adapters . I click on the link but it's dead. Please lmk asap . Thanks
TY! We have those here - retroshop.us/collections/wiring-adapter-harnesses/products/4th-gen-projector-adapter-v3-1-pair
(new website, this is a very old video)
Let me know if you have any questions.
Jeremy can you tell me if these can work in the reverse order? Meaning going from a projector style to a standard quad headlight? Or is this specific to just get projector style in the quad style headlight truck. If that makes sense thanks?!
No....there are no "inverse" adapters for the truck.
ok thank you for the reply!
1ofakind Why would you want to switch to Quads? Or duals? Over projectors? Any reason?
Will I still need a adapter if I'm doing the same thing but from a 2015 to 2015 head lights?
If you are going from quads to projectors......yes.
Do you have plug that are reverse? A male oem 14pin and female quad plugs? I have a 2017 RAM R/T and it has a projector plug. I’m trying to put alpha owl headlights.
Sorry, we do not make an "inverse" adapter.
Where can we get those new look headlights?
hi, please check our website - www.retroshop.us for current pricing. TY!
how do i run the switch backs in the 2011 all i can get is the switch backs to power on and flash white not amber
Ryan, please email us for troubleshooting with products we've sold you. TY! (email address is in the info above)
Just received the harness for 2017 but they came with one resistor per side, is it gonna work or I received the wrong part?
this video is old.......the product has been updated to have the resistors integrated to a circuit board - and will work on all 4th Gens.
2009 fam with dual lights to projectors.. which harness? And how much
shop.retroshop.us/ProductDetails.asp?ProductCode=13%2EAdapt
so? this is all i need to install 13projector on my 2012?
Yes.
do you have a kit to convert the rear tail lights to LED's
yes, we have these on our website - www.retroshop.us - thanks!
Hi I have a 2016 ram express quad cab will these work for my truck??
Yup. Any 4th Gen Ram.
I need this for a Ram 5500 2011 Will the wiring kit work on this truck. And the lights?
Yup! We can have our latest version of the adapters at www.retroshop.us (in the adapter section) - and we have headlights on the website as well.
Is the Canadian problem with high beam circuit that you mentioned fixed with the new generation of the plug you now sell in 2018?
Nope, that would require quite a bit more wiring, and not be a plug n play option.
Thanks for your reply - I see - do you have any hints or more details in that regard? i.e. what additional steps are necessary, Where I can find the parts (from yourself or sister shops), what have you....
Its not something we have put together, but essentially you'd need to disable the DRLs on the truck, use a 5pin relay system to provide power to the DRL wire on the adapter, then shut off power whenever the parking lights or turn signals are on. Great......fun - but again, not something we've really dived into at this time.
thanks for the info - makes sense - can you also confirm if we don't do the above hacks and leave things as per your video, would the turn signals and everything work and the only thing that will be noticeable would be that high beams will be acting as daytime running lights instead of the amber strip (as you mentioned) -- basically want to confirm that signals will still light up the ambers and not leave them orphaned?
What if I use AlfaOBD and put in BCM all typical factory code ? Would it show amber DRL ? I'm from Canada and would like to match OEM look as much as possible.
this is quite an old video......our newest 3.1 version of the adapters have a wire that runs to the fuse box to enable DRL. AlfaOBD won't be needed in that case.
@@RetroShopLights Thank you for the fast reply. I'll go for your new gen of product then ! Thx :)
To aim the headlights is the screw same like on the old light?
Yes!
RetroShopLights
Oh wow thank you for the fast reply. I have the headlight on the left and if I put the projector headlight and I'll be able to aim them through the hole in the fender?
yes, depending on the year though. Some pre 13s don't have the hole in the fender, it may need to be drilled.
Where can I get that headlight(the one on the right)
we have them at www.retroshop.us under Ram / 4th Gen
Ive noticed on your site that you have a V2 kit and it looks like you dont need any resister boxes anymore? is it an inline resister style now? that wopuld be awesome to not have to have 2 blue resistor boxes to mount on each side.
Yes! Quick note though, 13-14 is currently still using a resistor, but we are working on an update to those years as well - if that is what you have.
RetroShopLights awesome.. mine is a 2018 ram 2500 bighorn. Love the look of the the new projectors in black, mine are black but crappy ones haha.. if you upgrade to true fx-4 projector does that make you have a hid white light and brighter output? So I wouldn’t need hide with those?
The FXR projectors must be used in conjunction with HIDs. And they will give you awesome output!
RetroShopLights oh ok, that sucks.. I’m
Not spending 1500+ on headlights. Thanks
you mention no DRL amber lile stock for candian ram owners when purchasing this route. how about for US , if i buy these for a 2016 with the adapters with the amber DRL come on as if theu were in the stock versions?
If your truck is programmed for "turn signal" DRL, then yes. If its programmed for any other bulb, it will follow to that bulb. The adapter is simply a wiring pass through.
RetroShopLights is it possible to reprogram the truck to “turn signal” DRL from “high beam”?
Looking to install the projector headlights on my 2017 2500 that came with quad halogen reflector lights. I know I need these adapters and resistors. If I go this route, can I change the low beam bulb to LED? If so what would I need to do so? If not, but want a better bulb than halogen, what would you suggest?
Correct, though our new adapters don't have resistors (not needed). As for the low beams, HIDs would be best. We have those on the site as well, found here - shop.retroshop.us/ProductDetails.asp?ProductCode=4G%2E15%2EHIDs
So, I would need the 9005 bulbs for low and high if I did HID conversion for high as well? Thanks!
Correct. On the 16+ they are 9005 on both, 2 kits are needed if you want both low and highs.
For Canada. What if I retrofit d2s bi xenon and eliminate the hi beam on the reflector. Can I have the DRLs working normally now?
no.....doesn't work that way.
We are working on something for our Canadian friends - will update as soon as we have info.
@@RetroShopLights Any update for your Canadian friends?
@@Michael_Wild we do have ways of making this work with Canadian trucks. The factory DRL has to be turned off though, and another wiring harness has to be added in.
I have the leds on turn singles not working some work some don’t how do I fix that
The entire LED board has to be replaced. This can be done with switchbacks (white parking / amber turns), or sometimes with OEM boards (if we have any in stock......which is rare!)
hi, i need the adapters and resistors, how much are they?
hi, please check our website - www.retroshop.us for current pricing. TY!
Need some help please... I need a projector lamps set for my ram 2017... Where can I bought it??? Cheap will be great... 😁😁😁
we have replica and OEM on our website - www.retroshop.us
Go on amazon search TYC projectors
Can u use a HID kit with this?
of course! we have HIDs for these lights at www.retroshop.us as well
I know I can't put hids in the standard light can I put hids in the projector light. without a light beam going everywhere.
Yes, the projector lights do quite well with HIDs!
RetroShopLights great I'll order a pair tomorrow doing research on tyc or factor headlights should be done by tonight
Sounds great!
So this will work for my 2010 dodge ram
yes, any 4th Gen Ram.
Going from quads to projectors do I need new headlight bulbs?
Typically the new lights come with bulbs.....but - if you are wondering about swapping over your HIDs or something? Yes..... quads are H11, the projector lights are 9012 (13-15) or 9005 (16+ version)
RetroShopLights okay so the ones from my quads won't carry over? I just had stock but i don't know if the new ones I ordered will come with bulbs.
RetroShopLights so 9012 is the kind of bulb I need to order?
H11 will not fit the projectors......but most lights should come with bulbs. If not - halogen bulbs can be purchased at your local parts store, HIDs we have on our site as well.
RetroShopLights okay thank you! On the new lights are the high/low the same bulb? Thank you for your time and I'm excited to get my kit in!
i have a 2016 lonestar. will it work?
Yes
My parking lights flicker only when the truck is on and the turn signals act weird any advice?
depends on the adapter, but in our v3.1 adapter, those issues are no longer present.
@@RetroShopLights will your adapters work with the depo projectors?
@@viper306m yes, our v3.1 will. This video is very very old (v1 product) - but v3.1 can be found on our website.
@@RetroShopLights will order thanks
The real question is what does my 2016 RAM have 2012 lights
by 2012 lights you mean the quad style right? all trucks from 13 and up have the quad headlights unless they are the higher up trims. if i remember correctly, the R/Ts / sports, laramie longhorn and limited come from the factory with the projectors.
the projectors come with the higher trim trucks, while the lower trims get the quad headlights
I have a 16' bighorn with the quad style!?!
doo you deliver to canada
Yes, we ship everywhere
Does it work for a 2011 Dodge Ram?
yup! your 11 is a 4th Gen, they'll work!
What is ur website name plz
Website - 💻 www.retroshop.us
very hot means can give you problems?
no...resistors are designed to mimic the stock bulb - and when properly mounted to metal - no issues.
To much work for me