FINALLY, MY SAW BLADES HAVE A STORAGE PLACE | MAKING A SAW BLADE STORAGE UNIT
Vložit
- čas přidán 28. 12. 2019
- All my saw blades had laying around, in it's original packages, in my workshop. Almost never near the table saw. So i needed a solution for storing my saw blades near where i use them. So i came up with a solution which works great for me. Unfortunatelly I had not enough time to make doors, but maybe i will make doors someday.
ISBI
----------------------------------------------------------------------------------------------------------------
If you want to support my CZcams-Channel you can donate here :
www.paypal.me/isimplybuiltit
----------------------------------------------------------------------------------------------------------------
FOLLOW ME ON
INSTAGRAMM :
/ i_simply_built_it
TWITTER :
/ isimplybuiltit
PINTEREST
www.pinterest.ch/isimplybuiltit/
FACEBOOK :
/ isimplybuiltit
-------------------------------------------------------------------------------
#ISimplyBuiltIt #like #comment
-------------------------------------------------------------------------------
DON'T TRY THIS AT HOME :
I am a do-it-yourselfer and this is a private hobby video,
by showing me how to solve special tasks! The video is not an
instructional video and is not intended to be imitated!
That's why : All information and tips without guarantee!
Everyone is responsible for his actions and is responsible
for his own mistakes! For all work, the general observe
occupational health and safety regulations! I do not assume
any liability for damages and injuries!
Sehr gute Idee! Wird 1:1 abgekupfert :-) Vielen Dank!
I like the hand hold cut-outs on the crosscut jig. Keeps your hands away from the blade. Smart idea!
thanks for sharing...very creative & simple solution to every shops challenge
Nice idea my friend. Good job 👍👍👍
A very practical shelf, it is a formidable work
Such a great idea and very nicely built. Will have to add this project to my ever expanding build list.
Thanks for sharing your work.
Superbe idée et très bien réalisée👍👏👏.Merci de cette vidéo. Norbert (France)
Merci
That's realy clever. Now I now what to do in the morning.
Very nice and practical. Added to my list of workshop improvements.
Hello my friend. I like your beautiful storage project for saw blades. Good idea. The saw blades will now stand in place. Congratulations. Good job. Thank you for sharing. Merry Christmas. Yours truly....
thank you it is very nice
only one thing
i would put a transparent door for the durst
For many Woodworkers, they have different sizes of saw blades. There are 7 1/4" circular, 10" table and 12" miter saw blades.
Then, there are people like me. I have a METAL blade for steel in all sizes and a set of solid steel blades for laminates.
So that's about a dozen of them that I have stacked up.
If I made it horizontal, with the pin going through the front top to bottom. Each one could pivot out like a shelf AND hold all of my blades.
Good idea. I just have to reorient the layers to horizontal and a piece of angle for a pin rest.
Great idea, and very nice work. Cheers
Thanks
Very creative project excellently executed! Great Job.
Nice project. Beats my method of sticking a bunch of blades on a 16d nail 😂
Well done!... Great idea.
EXCELLENT !
Brilliant solution. I have tried so many storage methods for my saw blades but this looks like a great idea
Thanks
Perfect. 👍👍👍👍👍
Thanks
Great project ! I need to something similar. Thanks for the inspiration and the video !
I'm glad if you like it.
Clever build 👍
Thanks
Very good idea!
Brilliant! I've been mulling over making something similar to store blades. I'd also like to make something that portable too to take to job sites.
Nette Idee! 👍
Sehr cool diese Idee, schönes Aufbewahrunssystem, das hat mich sehr inspiriert und werde ich auf jeden Fall nachbauen.👌👌👍👍
Ich wünsche dir und deiner Familie einen guten Rutsch ins Jahr 2020 und fürs Neue viel Gesundheit, Glück und viele neue Projekte.🎆🎆🍻🍻
LG Kalle
I'd like to just buy one!
Well done sir!
Thank you
Geninus!
This would make a great lasercutter project.
That's a really clever blade holder. I wish you sold plans for that.
Really fantastic idea, dude! Really well done! 😃
Happy new year!!!
Thanks
Вроде мелочь,а такая удобная ящейка для дисков,!👍
This is a much better design than others that I have seen. If I ever get a real tablesaw and multiple blades, I'll probably build a storage cabinet like this.
A small suggestion: most 10" blades are 1/8" wide, slightly more than the 3mm inner partition, which makes for a tight fit. I would suggest using 3/16" (actual size = .175" = 4.4mm) masonite which you can get at home depot for $14 for a 48x96" sheet (Model# 832780). That way you won't have pull the blades out of their sleeves. I do like the idea of this as convenient and volume sparse. Danke.
Thanks. But all of my blades are 2.8mm in width. So using 3mm MDF works perfect.
@@ISIMPLYBUILTIT - Interesting. So my comment would simply apply to American woodworkers.
Un bel progetto riuscito molto bene.... Ottimo lavoro!! Buon 2020 :-) :-)
Grazie
Hallo sehr interessante Idee, gute Lösung. Einen guten Rutsch ins neue Jahr 2020.
mfg. vom Ndrh. Hans-Peter
Danke
👍👍😊
Nice build and video! 👍 Can you please list your blades and where to buy them?
Thanks. I bought all of them in germany. The Blue one is from Bosch, The red ones are all from Freud (I think they are similar to the Diablo Blades) and the flat tooth blade is from DeWalt.
Can you make a video of the tablesaw fence? Have you modified the dust extraction on the saw?
That crosscut sled concerns me...
anybody know where to get those pins he uses to make it swivel.
Go to Amazon.com and search for shelf pins.
What kind of countersink bit is that?
It's a Bit from Wolfcraft. I bought it in a Hardware store near by.
That counter sink bit...where did you get it? I’ve seen it on other videos but still haven’t been able too find one.
Question two: Two different sleds because two different blade kerfs?
General Tools Countersink Set (3-Piece)
Model #195ST at Home Depot is one source
No. Two different sized sled's. One for smaller pieces and one if I have to cut bigger boards.
maybe should have threaded the alu so no nuts showing. cleaner look, as any screw extending gets filed down flush.
Well done, but I am not making a video and I don't have the time or interest that much detail Good job for others
The back isn’t going to come off for sure.
Top! But isn't the effort too big ... for five saw blades?
Na
Nice but the hi pitched ring is annoying
Good project! However. the rapid fire video is a bit distracting! Slow it down a little. OK??
I like the idea but it wastes tooo much space and I have a small shop
Thanks. I have a small shop too. Mine is 4m x 3m.
Den Kanal schaue ich nicht nochmal. Das ist unverschämt viel Werbung.
Du bist ja lustig, dass regelt doch YT und nicht er.., was kann er dafür? Ist doch bei jedem der Videos macht so, oder täusche ich mich?
Und so schlimm ist es doch auch wieder nicht, sie sind doch kurz? 🤷🏼♂️
Und schon mal überlegt, dass er auch was von YT haben muss, für all seine Ideen und Zeit die er da reinsteckt; mit einem Vollzeitjob und Familie?
Und wer sagt, dass Du es schauen musst?
Ich sage ja nur.. 😉👍🏼
@@Metzolino ich habe nichts dagegen wenn Werbung in einem vernünftigen Maß gezeigt wird, aber nicht alle 2/3 Minuten. Im übrigen entscheidet er ob und wieviel Werbung gezeigt wird. Wenn er so gierig ist und alles abschöpfen will muß er sich nicht wundern wenn ihm die Zuschauer weglaufen.
Liebster Holzmotte, ok, wusst ich nicht, doch vielleicht stellt ers ja nach einiger Zeit wieder um, und wer sagt das ihm DIE Zuschauer weglaufen, woher weisst Du das? 🤷🏼♂️
Du würdest ihn lieber zuerst fragen, warum er das so macht, denn alles hat seine Gründe, muss nicht das sein was Du schreibst.
Und erstens gibts doch die Möglichkeit, dass man die Werbung sofort, mit einem Klick abstellt, so mache ich es IMMER.. 😉
Und es gäbe auch noch apps, wo Du alles ohne Werbung ansehen könntest, also nur so als Idee 🤷🏼♂️😊👍🏼
Waste of material, time, energy. Do something usefull.
Dear Robert Kattner, and who are you, to say him, what he have to do and what not? I‘m just asking.. 🤷🏼♂️😉
Don't waste your time, writing something bad to someone you don't even know. And just don't look at it anymore, it could be that easy. 😉
Because as you see, the majority likes it, and that counts..
And now much much love for you... 🙏🏼
could u please chare wiht me the sizes of the proyect??? thank you .