Cutting Up the RZR Turbo!! Bobbed & Boat-Tailed Instead of a "Bed Delete" ++ 2 minutes of Coos Bay!
Vložit
- čas přidán 28. 08. 2024
- Being paralyzed, it was really hard to reach the air filter and spark plugs. I decided to do my "how to" version of a "bed delete" on it. It has provided MUCH better access to the air filter, injectors, spark plugs, etc.
I like what you did there, and it looks pretty good. I think my favorite part is the use of the factory lights flipped sides and the easy access of removable flooring. 👍🏼
Thank you!! It really did make it much easier for me! I just always have to remember that I don't have a "tailgate". 😆
Excellent job! It looks really clean and I like how you used your factory tail lights! A lot of “bed deletes” take them our completely. Great job!!
Thanks! I appreciate the feedback. I was going to buy different taillights, but the factory ones just fit too good in that location.
My guy!!! I am also paralized and looking to a bed delete for the same reason. I installed the AA stage 3 lock and load this summer with my dad and MAN, WHAT A CHORE FROM THE CHAIR!! I just ordered the water cooled turbo and stage 4 so figured while the beds off ill do a bed delete. Awesome vid!!
Hey man, good to hear from another para! The stock bed is terrible for us folks, haha. Working on these things isn't easy, but it's better a lot of cars I work on. I recently did the Dynojet (same as AA water cooled turbo) turbo upgrade. It makes quite the difference! What hand controls do you use?
@@PapaWheeliesWorld good to meet yuh. I used to drag race a custom 300hp snowmobile powered atv...but broke my hip and isnt possible anymore. That ran 3.3 seconds at 90mph...so trying to get a SIMILAR rush...but its not even CLOSE to the same lol. I use the 300$ controls i got almost 20 yrs ago. They clamp to the pedals...each comed up near my waidt and connect...pull for gas pysh for break. Im going to mount my launch control button on the handle so i can have a hand on the wheel and hand on launch. Pretty excited. Should have it in a week or two. I think im gonna bite the bullet and pay my buddy who has an atv shop to do it.
@@BSConservativeGOAT That snowmobile sounds crazy!! That should work well for your launch control to be on the hand control. You might look into the Hess Motorsports 2:1 steering reducer. I love mine for one handed driving!!! 1/2 to 3/4 turn lock to lock!
U freaking killed it. Looks badass buddy.
Thank you so much!! I love hearing feedback.
WOW! I found your video looking for something else entirely, but you did an amazing job on your bed delete! It looks fantastic and I'm happy you made this machine easier for you to work on! I'm sure others will see this and be inspired to paint the canvas to suit them. Thank you for sharing!
Thanks! It sure does make better access. I have three friends who have done something similar after I did mine because of how easy it makes it to work on.
FUCKING KILLED IT!! 🤙
Thanks man!
For your situation looks good for your application for what you need it for!
Thanks! It sure has been helpful!
See the same thing down south on RZRs to narrow up the rear. Great job.
Thank you!
Outstanding! I wish I could visualize a project like you do. I have a ‘21 rzr trail that i was trying to make a tonneau cover for and this made me rethink everything. You’re bed design sure would make it easier to load deer/elk!
Thanks! I wasn't sure how I wanted it to turn out. I just figured if I start cutting something will work out. 😎
Looks really good
Thank you very much!!
Absolutely nothing bad to say about that. Looks killer and even better served a bad ass service! You killed it man! And got major balls to do that too!
Hey man, much appreciated comments!! Thanks so much!! 🤙
@@PapaWheeliesWorld heck yeah man!
I like the bobbed look and the lights work awesome
Thanks!!
Damn man very ballzy a project like this a machine this expensive looks great congratulations bro we’ll done
Much appreciated!! I'd be lying if I said I wasn't a little worried at the start of the project, haha.
@@PapaWheeliesWorld much braver than me I would have been worried sick
I was a little, especially after it freaked my wife out, haha.
At first i was why . But after seeing what you did Good job and my wife is the same way when i am done she likes it
Thanks!
Looks great! I would like to see more video of the finished bed. 👍🏼
Thank you very much! I'll have to do an update video of it currently. You can check out my Treal exhaust video. I believe it'll show the bed as well.
Soooo sick personally love the outcome even for myself! Also such a smart and creative idea for your needs rock on brother!🤘🏽
Much appreciated! I love hearing the feedback!!
Start making that a kit! That is sick! I love the way it turned out. Great job. I wanna do mine now too. I like the way it makes the rear end squatty looking. To me it’s too bulky stock!
Thanks so much for the response!! I never thought about making a kit out of it. You're right, I don't prefer the big bulky rear end of them when they are stock.
Looks fantastic!! Well done sir......
Thank you very much!
I think you did an awesome job with the boat tailed project! I hope that you are able to access the engine better. I assume that the wife was happy with the end result as well.
Oh yeah!! I can reach it all very well now. Haha, she is happy with the way it turned out...thankfully!!
Looks good man! Great job. Looks like the access is way easier.
Thanks man! The access is WAY better for me.
That looks way cooler than stock! “I think I’m gonna throw up!” Lol 😂
Thanks!!
Came out SICK!!!! Bro def a unique look out there and that would be sick if you could put like a tube bumper that matches your cage to cover the exhaust
Thank you so much!! And yes, I should do a bumper like you said. Watch our video on Adam's car called "Part 1: Big Turbo Bernice". Adam's car has a cool rear bump/bed section that I may have to copy some day.
What did you use for the “new plastic” ? I really like how you did this
The floor of the bed? I just got a sheet of 1/4" abs. Let me know if you want more info. The other stuff was about 1/8" abs.
Started watching because of the catchy title...immediately thought wtf is this guy doing, but I'll be honest it doesn't look bad for what I assume was relatively low cost overall. Plus it helps with your mobility needs so I'd say it's a job well done. The factory taillight locations you chose do look really good so nice idea there. As long as you're happy with it and it's functional for your needs, then it's a win.
Thanks for your comment! I do enjoy the feedback!
Looks beautiful
Thank you!!
You should be proud!!!! Looks awesome!!!!!!
Thank you!!
You did a Bada$$ job. SWEET!!!
Thank you so much!!!
Looks awesome man good job!
Thank you very much!
Looks great im a short guy thinkin about it doing this.your pretty inspirational good on you
Thanks man! I really think you'd like it. There are a few in our riding group now that have cut the back off theirs. The access is so much better.
Great job.
Looks awesome
Thank you very much!!
Badass dude! I was just looking around for RZR videos and found you. I myself am a para and recently purchased a RZR myself. I was wondering from the title why anyone would do this and after seeing this I love it being that we are in the same situation. Would love to link up and ride sometime.
That's awesome you got a RZR!! Are you from Oregon? It would definitely be cool to link up!
Awesome video and great job.
Thank you very much!
Looks awsome great idea
Thanks!
That's tight. I want to do something similar to my new turbo R.
That would be awesome! I haven't seen anyone do that to a new turbo R yet.
Looks good brother
Thanks, I appreciate it!
This is the best video out there and you should be proud! Can you do an update if you have the machine of close ups of where everything is screwed in?
Thank you so much!!! If you email me at dewarjon@gmail.com I'll take pictures and send them to you.
Well done.
Thanks!!
Looks good!
Thanks!
Oh wow, nice custom bed... thanks for sharing, definitely opens my mind to endless ideas.
Looks amazing, any other custom work you’ve done to your rzr
Thanks for the comment! It was really a fun project! I haven't done too much custom stuff to it yet. I'd like to upgrade the turbo at some point, but I like the reliability of stock.
Looks good 👍
Thank you very much!
Looks awesome bud
Thank you very much!!
I like it.
I’m also 20v Dewalt and 12v Milwaukee 😂
One day I'll consolidate, haha.
I’m paralyzed too, and I was WTH is he doing. But makes sense. Personally if I need access to that stuff I’ll have someone else help me out. But I get it man, sometimes you just wanna do shit yourself lol. This was balsy but you did impress me, came out pretty clean
Haha, thanks! I'm usually the one doing all the work (spark plugs, oil change, air filter, turbo swap) myself so every little bit helps. I was a little worried when I started, but I am happy with the results. Thanks for your feedback!!
Looks Kool, I've watched this video 3 times now. I'm way to chicken to cut up my car.
Thanks so much! It took me a little bit to get brave enough to start cutting!!
😎🤘🏻🔥 great job
Thank you!!
Looks great!! What is the factory cage made of? Chromoly / steel?? MIG or TIG weld?
Thank you! The factory cage is not chromoly and it's not tig welded. The aftermarket cage on mine is DOM and MIG welded. I wish there were more options out there for chromoly/tig.
i think it looks bitchin! i love how you re used the stock lights by reversing them and really like that light bar tail light! thinkin about doing something similar to my 2 seat. thanks for the great video and inspiration/motivation to bust out the multi tool and get cuttin!
Thanks for your input!! It's fun to just start cutting and figure things out as you go! A little nerve racking sometimes, but that's part of the fun I think.
i get it. if i was paralyzed i may have come up with a project like this. it doesn’t look bad at all either. it just seems like a lot of work just to get to that compartment. couldn’t u have your wife do the simple checks since u couldn’t reach? or just have to dealership to the scheduled maintenance. if people like us have the money to buy a rzr we have the money to have a pro maintain it
Oh yeah, I definitely have people to help! I am a mechanic/fabricator by nature and build my own stuff so I like making things more convenient. I enjoy the tinkering part of it!
nice job man. tap tap plastics
Thanks so much!!!
Not bad
Thanks!
Do you have a picture of the air box routing?
Yeah, shoot me an email @ dewarjon@gmail.com and I'll send you a couple! -Jon
Where did you get that plate for your bed?
It's a 1/4" piece of ABS I cut out from a local plastics supply store.
My dad is also in a wheelchair. Has no movement in legs or feet . He’s always wanted a side by side to join me on rides . My question is does your have hand controls or how do you drive yours ? Also do you keep a wheel chair on board or leave it back at the truck ? Love the video keep on riding safe man !
I do have hand controls in mine. I have a kit from these folks: www.suregrip-handcontrols.com/recreation
It took a little modifying, but it's a good kit overall. I don't usually bring my chair with. If I know we are going to get out somewhere then I'll bring it.
@@PapaWheeliesWorld thank you for the help. Maybe we can get him in one soon . Keep safe on the trails
We’re did u get that chase light from
I looked all over and found the only one that looked like it would fit on Amazon. I was skeptical, but after hooking it up it is BRIGHT!!! I actually tilted it down so I don't blind my friends every time I put on my brakes.
Pretty cool man!!
Thank you!!
Looks good!
Thanks!