Car Painting: How to Spray 177 UHS CLEAR COAT| Chamäleon Winter Academy
Vložit
- čas přidán 7. 02. 2022
- Go to the product 177 UHS ➡️ chamaeleon-produktion.de/uhs-...
Go to the product 178 UHS ➡️ chamaeleon-produktion.de/id-1...
One of the most popular clear coats among our customers is the UHS 177. It is loved for its amazing deep gloss, economy in use, and protection against scratches.
UHS 178 Clear Coat is optimized for spray temperatures over 25°C / 77°F. This product has the same properties and excellent results as our 177 and can be used with the same hardener as the 177.
Follow us on social media:
Facebook - / chamaeleongmbh
Instagram - / chamaeleon_gmbh
LinkedIN - / 11488268
Tik-Tok - vm.tiktok.com/ZMdXYptCC/
If you want become a distributor, please contact us: info@chamaeleon-produktion.de - Auta a dopravní prostředky
HOLA... DESDE VENEZUELA... USTEDES TIENEN EL SISTEMA BICAPA...
what should i do if my spraygun specifications (Iwata HVLP LPH80) says that the optimal pressure at the inlet of the gun is .8 to 1 BAR? should i change my spraygun?
You have to do spray gun settings regarding to spray gun producer recommendations
what does it mean
High solid quality ❤
Luster or hardness?
@ahmedgamal3 high solids means that after the solvents release it has atleast 50% left over solid material. Most high solid clears are between 50 to 60% solid content, most are 2:1 mix too but there are some 4:1 high solid clears on the market too. Your production clears you see out there that are 4:1 like acme finish 1st fc720, and other standard overall clears are low to medium solids which are about 33% to 45% solid content. They are easier to spray than high solid clears but i prefer high solid clears because i feel you get more luster (glossy finish) and they usually are harder, offering more protection from scratches as well as UV rays because the mil thickness of the coating is thicker because of the solid content. Important thing about high solids when spraying is to do your first coat as a half wet mist coat like video says otherwise your next coat (or next two which i prefer two after my first mist coat) will run or sag on you since your next coats will be full wet coats. I have used Chameleon 177uhs and 180 uhs fast and perfect and can say they are both excellent high quality clears that are up there with kits that cost $100 to $150 more than the Chameleon which the 177, and 180 run between $170 and $200 per kit
How much time I need to wait before drying in camera or ic?
Dear sir,
5-10 min flash off time should be enough