Video

Sorry for the long wait. In principle, there is no need to cover with other primer. But it depends on what further application steps are planned. If, for example, you want to apply a 2K top coat, then it is not necessary to apply an intermediate coat with a primer. However, if it is planned to apply filler(putty), it is strongly recommended. even if a primer coat of clear varnish is planned, i would recommend an intermediate coat followed by intermediate sanding to create a smoother surface. however, if the surfaces are not visible, this can be dispensed with. It is important that there are no recognizable sanded-through areas on the metal substrate. Otherwise, you have to coat these.

Got it, thanks for the follow up! Can i use your 2K 4:1 primer (14444) cause i remember that the hardener was “Acrylic”.

Yes, this is the right product, apply 2-3 coats

It is recommended to wait for the 1k clear coat to cure, sand and then apply 189

@ Sorry I meant laying this express clear on top of 1k acrylic base coat after its 15 min flash time, how should I go about it? What will happen to the still relative wet paint underneath the express clear coat once clear has set?

Yes, of course, but the drying time will increase

It is possible, but for a guaranteed high result it is recommended to lower it to 3000 and treat it with abrasive polishing paste

@ thanks 🙏

The clear coat is applied in 2 layers, without adding a thinner. Easy to polish.

Thank you for your feedback, it's valuable to us

Hi, please contact our local distributor in France: Color-carrosserie Zaoui Ayachi, +33 6 66 86 16 38 color.carrosserie@gmail.com

Hello. Gloss: satin matt

Hello. Yes, but, on not large area

looks like it is kinda "rust locker", could be similar to MIPA made "Rostversiegelung". In my understanding it converts top of the rust and closes it from ambient moisture. I think, epoxy primer must be put over it.

Yes, sure. Chamäleon thick layer filler is advanced filler with excellent filling properties and coverage. It is highly suitable for levelling superficial scratches and minor irregularities in sanded surfaces. It offers excellent adhesion on polyester filler, plastics and metal. It has a very good flow, is wet-on-wet re-sprayable and easy to sand.

Ebay or Amazon

@@debardelabenc couldn’t find it

Hello. Thanks for your interest in Chameleon. Please, contact our distributor in California: www.germanrefinish.com/

Hello, and thanks for your interest. Unfortunately, we don't have a distributor in the UK.

Contact us: write to our technical support address 📧 technic@chamaeleon-produktion.de

Ciao. Al momento abbiamo in stock solo il nero.

Hello. What exactly do you mean by "single stage"

@ single stage paint

With acrylic 2k top coat yes, for base coat use base coat binder

Dear sir, 5-10 min flash off time should be enough

Hallo, könnten Sie uns sagen, woher Sie kommen?

Hello, yes. More information on our website www.chamaeleon-produktion.de/id-511-super-fill-putty.html

Hello. You can apply 499 primer over 1K epoxy primer and get good results.

@ thank you.

Hello and thanks for your interest. Unfortunately, we don't have a distributor in the UK.

Thanks for your interest. Could you tell us where you are from?

@ Frm Nepal

Really ?

Thanks for your interest. Could you tell us where you are from?

Hello. Mixing 2:1 with hardener. Applied without adding thinner

@ thank you very much!

Hello, could you tell us where you are from?

Hello. Sorry for the delayed reply. Spot blender applying immediately after clear coat

Oh sure

I think that is user error