Fiamma Awnings - How to Rigidise a Box Awning

Sdílet
Vložit
  • čas přidán 22. 08. 2024

Komentáře • 12

  • @rogerpaul6056
    @rogerpaul6056 Před 5 měsíci +3

    Hooray finally a straight talker with great results

  • @lyninglis1074
    @lyninglis1074 Před 2 měsíci +2

    Thank goodness. The velcro strap is our answer. Thank you so much

  • @alcofarm1
    @alcofarm1 Před 5 měsíci +1

    thank you for explaining it in simple terms and making it look so easy!

  • @avalynnewilby8150
    @avalynnewilby8150 Před 4 měsíci +2

    The problem is that box awnings are for shade only. Not for rain or wind conditions. Of all the designs, Fiamma is probably the better, but they are really not fit for purpose if your purpose is an all-weather awning. All you need is an AFK and tie down straps. You dont need extra poles and holes. Also Peggy Peg make a foot support which the foot at the bottom of the poles fit into. No need for modification.

  • @mckeeje
    @mckeeje Před 5 měsíci +1

    That’s my van, almost!

  • @JonKaren
    @JonKaren Před měsícem +1

    Can we use aluminium poles (rather than the steel tent poles) - trying to recycle some of our tent gear?

    • @ConceptAdventures
      @ConceptAdventures  Před měsícem +1

      Yep should be fine as long as the clamping lock on the poles are strong so it doesn’t collapse

  • @victormeldroo
    @victormeldroo Před 4 měsíci +2

    never use ratchet straps they apply too much force, use only cam buckle or double D ring straps, much safer and many people don't know how to use ratchet straps properly anyway. also if you put a twist in the straps it will stop that annoying buzzing sound when the wind picks up, you know the one that sound like crocodile Dundee making a telephone call.

  • @sharnewarde1447
    @sharnewarde1447 Před 5 měsíci

    Hi that is exactly what I have set up same van and all how ever 1 end works perfectly but the other doesn't when u slide the grass hopper on to the plastic lip there's not enough material from awning to clamp down. It's like it's to far from edge of awning so when you close the clamps on AFK it doesn't hold any suggestions would be very appreciated been away 4 times and can't get that end to clamp ??? Thanks

    • @ConceptAdventures
      @ConceptAdventures  Před 5 měsíci

      Hi there… if I understand what you’re saying, it could be a little like mine…. On one of my ends it’s like the awning vinyl has not. Web cut straight or put in not perfectly square - however yours sounds a bit worse than mine - at least mine clamps pretty much ok…..if I’ve got it right about yours I’d be putting in a warranty claim

    • @sharnewarde1447
      @sharnewarde1447 Před 5 měsíci

      Thank you I wondered that see how I go with that

    • @davidfenner197
      @davidfenner197 Před 2 měsíci

      I thought the same the first time I used the AFK. I found though, I was using an 'outer' piece on the awning frame to slide the Grasshopper onto... wrong one, the proper slide on bit is inside the one I thought it was... if that makes sense. Then perfect.