ford clutch push rod repair part 1
Vložit
- čas přidán 12. 09. 2024
- This repair would work for any 1992, 1993, 1994, 1995, 1996, 1997, ford f150, f250, f350 or f450 im not sure about any other years or models but if you know of any let me know and i can definitely update the desciption or if you have any other ideas about how i could have done the repair differently let me know.
I created this video with the CZcams Video Editor ( / editor )
Your video helped me alot dont listen to the other negative views
Heya Poorboyz,
I'm with you! Use what you got & get the job done. Thanks for the video, I've got to tackle this job next week, what else does a guy do with his vacation time but a brake job & this mod? . Just got a heim joint mod ordered from ebay.
With the pin being so stubborn, may I suggest drilling it out with bigger & bigger bits until you get close to the bracket hole size? The drilled hole will allow the remaining metal to deform inwards when you punch the pin out.
Thanks Again & Best Regards,
Jon
Use what you got. I've had to fix a lot of things "the wrong way" due to not having all the tools needed.
Heat almost always helps loosen stuck steel fittings, and penetrating fluid. The fluid will smoke but that's life in the big city. A chunk of steel and some clamps (or more vice grips) are your friend.-just sayin'...
I was using what limited tools I had at the time. If I did it now I'd grind it then put it in a vice and air hammer it out.
When you were trying to hammer out the pin after grinding off the weld, instead of hammering it against the sidewalk, you should lay it across a vise or some other surface with an opening just wide enough to support the bracket but let the pin fall through the opening of the vise or other surface with a hole in it. The way you did it, the pin had no freedom to be driven out.
Cedric Ward I just used what I had and it worked great
“I don’t have a vise, guess I’m using my boot” did you not hear it?
At the very least I would have used a Ball Hole in the bumper instead of beating my paint to death and wrecking my bed. I've used my bumper as an anvil on many occasions works pretty good
I was waiting for him to wack his thumb.
Thanks for watching. Like and subscribe and your wish might come true.
Hey so this problem just happened to my 1992 f250 7.3 diesel, I really would appreciate it if you could give me a link where to buy one of these. I need and miss my truck already :'( I need an answer asap please I need to order it quickly
m.ebay.com/itm/like/261916068931?lpid=82&chn=ps&ul_ref=http%253A%252F%252Frover.ebay.com%252Frover%252F1%252F711-117182-37290-0%252F2%253Fmtid%253D1588%2526kwid%253D1%2526crlp%253D53601919689_324272%2526itemid%253D261916068931%2526targetid%253D87946132209%2526rpc%253D0.23%2526rpc_upld_id%253D50676%2526rlsatarget%253D%2526device%253Dm%2526mpre%253Dhttp%25253A%25252F%25252Fwww.ebay.com%25252Fitm%25252Flike%25252F261916068931%25253Flpid%25253D82%252526chn%25253Dps%2526adtype%253Dpla%2526gclid%253DCjwKEAjw4-SrBRDP483GvreDr2ASJAD5sCIuwsu_-aoxNHAcg_YGzQVqSLTVjUapUQYrdoTvkEYohRoCxm7w_wcB%2526srcrot%253D711-117182-37290-0%2526rvr_id%253D847183621134&ul_ref=http%3A%2F%2Frover.ebay.com%2Frover%2F1%2F711-117182-37290-0%2F2%3Fmtid%3D1588%26kwid%3D1%26crlp%3D53601919689_324272%26itemid%3D261916068931%26targetid%3D87946132209%26rpc%3D0.23%26rpc_upld_id%3D50676%26rlsatarget%3D%26device%3Dm%26mpre%3Dhttp%253A%252F%252Fwww.ebay.com%252Fitm%252Flike%252F261916068931%253Flpid%253D82%2526chn%253Dps%26adtype%3Dpla%26gclid%3DCjwKEAjw4-SrBRDP483GvreDr2ASJAD5sCIuwsu_-aoxNHAcg_YGzQVqSLTVjUapUQYrdoTvkEYohRoCxm7w_wcB%26srcrot%3D711-117182-37290-0%26rvr_id%3D847183621134&_mwBanner=1
I am sorry for the late reply
No vise. Use a socket to set the pin into. Go to Menards and get a real hammer. I'm sure if u have kids their missing the tack hammer you got.
any reason you can't just cut and bore the pin why cut off the push rod
To bad he is trying to hammer it out the wrong way, talk about backyard mechanics. wow.
thanks for showing me how it's done bub. good job pal.
I googled how to remove clutch pushrod in 2002 ford ranger? and got this. can anyone answer my question?
Yeah buy a old Toyota pickup with 22re they will last for ever and just a fyi ford went back to a cable clutch for mustangs hummm makes u think why. oh wait I know cable works every time
Zip tie ?
DV8 are you asking what a zip tie is?
What if mine is plastic
What is plastic?
this is scary. i wouldn't let this guy sharpen a pencil. unreal!
lol thanks for the info
holy shit! how long you gonna beat on that fuckin thing ? buy a new one for $10 bucks
Michael O'Neill heck no just beat the shit out of it. it worked out fine
Damn got mine for 9 lol
crhmachine scam ripoff Carl Robert Hoffmeyer and Kimberly