Thanks for that excellent video Zaff……, great content, well thought out and presented, very good information. I really enjoyed that ! ( I think I may just retire completely from off-roading and just sit back and watch your vids, cuz it’s sooo immersive lol 😄)
Thank you Mr. David, it means a lot coming from you ! You can never retire from off-roading, all us young guns look up to you. I appreciate your support ! :)
If the cups for the back of the lights are rubber, why not cut a small x in the middle and feed the wires in one at a time and put silicone around the wires to seal? Great looking job 👍👍
I'm not sure if it would fit. I don't know the size of the JB74 headlights. You could stick the rings, I chose not to because the glue might release over years which would require me to open the headlights again which I'm avoiding. Thats why I chose wire but glue can work as well.
Dear friend. It was better to take two pins and connect the angel lights wires with the original bulb rubber which has already the two wires red and black.
Hey buddy, thank you for the suggestion. That’s another way of doing it, but I’ve had no issues with them so far, they work perfectly ! 😁 Thank you again ☺️
I’m about to do this to my gen 3. Is there any reason you didnt feed the halo light wires through the original parker light socket hole and make a cable plug for it to pass through? I don’t want to have to drill another hole and also solder. 😅
I didn't want the wire to be visible. So I drilled a hole and ran it behind the reflector bowl and out through the park light socket, which can be seen at 20:15
Hi, my dad is an very proud owner of a 2006 Suzuki Jimny and it has been stuck with most of the original parts but I think i would be nice to give it some upgrades. What kind of upgrades do u recomend ?
Thanks for that excellent video Zaff……, great content, well thought out and presented, very good information. I really enjoyed that ! ( I think I may just retire completely from off-roading and just sit back and watch your vids, cuz it’s sooo immersive lol 😄)
Thank you Mr. David, it means a lot coming from you ! You can never retire from off-roading, all us young guns look up to you. I appreciate your support ! :)
Sometimes I forget that this is the first time you're doing all this. You always seem like you've done this a million times before.
Looks amazing! 😍
Awww thank you ☺️
For me it looks better without the angry eye. I was waiting for your new vids. Congrats man much love with that jimny. 😁
Thanks man ! I appreciate the support 😁🙌
this channel deserves more subscribers. very nice work.
We would get there eventually lol :)
Great job here buddy ... Like the content!!!!
Attention to details on not cutting the harness .. kudos
Thanks bud, I appreciate the support !
Finally a video
Well done bro
Has Andrew Huggins finish his Suzuki Gypsy
Thanks bro ! It's almost completed, lots of content with that dropping soon !
Excellent diy bruv. Thanks for sharing. Looks really mean!
Thank you, No problem 👍
Great job
Thank you :)
sick, really encouraging video man!
Thanks man ! I appreciate it !
Looking super good bro!! Making me srsly reconsider a setup like that now
Thanks bro ! You should do it !!!
First time viewing your vids...definite subscriber here for sure! 🔥
I’m glad you enjoying the videos 🙌 Thank you for the support !😁🎉
Good job
Thank you!
I was looking for a video like this for my Jimny for so long !! Thank you!!
It looks more and more like a G class 😂😂
Thank you ! Glad I can help :)
good job 👍
Thanks
Nice work bro!
Thanks bro !
Nice Work!!
Thank you 🙏
Excelent! Great job!
Thanks buddy ! 😄
If the cups for the back of the lights are rubber, why not cut a small x in the middle and feed the wires in one at a time and put silicone around the wires to seal? Great looking job 👍👍
This is a great idea ! Thanks bro !
Points for the before and after beam shots at night
Thank you ! Def wanted to show the difference in function as well :)
Fireeeeeeee
Thanks bud !
Hi, excellent work. Where can I find the tape you use to re-glue the transparent glass to the optical body for sale??? Thanks
Thanks man. It's called butyl sealant tape. I bought it off eBay
Где купить круглые вставки белые?которые ты вставил
eBay. Ссылка в описании видео
any updates as of now? did it form any condensation inside? did the lens of the headlight oxidize much faster?
No issues with it. Didn't have any condensation or oxidisation issues. They're working perfectly
thank you! was planning to do the same but with BI-LED projectors, in order to simplify things (no need for ballast and harness)
@@raphaelclarkchristianraran7764 That can work as well :) I hope you get through
Very nice 👀
Thank you ! :)
Do you think same Halo rings will fit JB74 round headlights? Thought of pasting the rings rather than tying with wire?
I'm not sure if it would fit. I don't know the size of the JB74 headlights. You could stick the rings, I chose not to because the glue might release over years which would require me to open the headlights again which I'm avoiding. Thats why I chose wire but glue can work as well.
Zaff , какой размер ангельских глазок?
Where you got the indicator bulbs ?
Bought them from whiteout lighting
Dear friend. It was better to take two pins and connect the angel lights wires with the original bulb rubber which has already the two wires red and black.
Hey buddy, thank you for the suggestion. That’s another way of doing it, but I’ve had no issues with them so far, they work perfectly ! 😁 Thank you again ☺️
I’m about to do this to my gen 3. Is there any reason you didnt feed the halo light wires through the original parker light socket hole and make a cable plug for it to pass through? I don’t want to have to drill another hole and also solder. 😅
I didn't want the wire to be visible. So I drilled a hole and ran it behind the reflector bowl and out through the park light socket, which can be seen at 20:15
@@Zaff_TT Yeah makes sense! Thanks for your response. Awesome vid 😊👍
- @littlej1mboy
Hello, after the modification, does the high beam indicator light work when you turn it on?
@@RafaelloW007 yes it does
Hi, my dad is an very proud owner of a 2006 Suzuki Jimny and it has been stuck with most of the original parts but I think i would be nice to give it some upgrades. What kind of upgrades do u recomend ?
Depends on his budget, what he wants to do with the jimny and the local laws. There are plenty of modifications on the channel to choose from.
Great job man! I want to copy this headlight mod (if you don’t mind) - can you give me a list of where you got all the parts buddy 🙏🏼🙏🏼
I don’t mind buddy, all the parts in the description 🙌
how many inches did you lift it?
Check the first video on the channel. It's 4 inches total
Where did you get the angry eye lid?
On eBay. Search “Jimny eyelid” you’ll find them 👍
Привет, как оптика , не перегорели?
Неа. Они работают отлично. Без вопросов
Не могу найти кольца 160мм, они точно 160тт?
Where do you order this kit
It’s not a kit. I custom made the light from parts I bought from different places. Links to which can be found in the description
what is that radiator in front of your AC?
Transmission cooler….I have a video of it on the channel
@@Zaff_TT we don't have AT here in Brazil's Jimny
@@dilmar4033 Ohh...I didn't know that
Hey zaff did you use h1 hid ?
Yes sir
@@Zaff_TT where did you mount the h4 harness socket is it on the driver side or the passenger side headlight?
@@mrwhite-zw7wr Side closer to the battery. In my case, the driver side.
@@Zaff_TT thank you zaff. You really explained well with your vid i also have a jimny jb43. Can't wait for your next upload.