GYEON Polishes and Pads
Vložit
- čas přidán 3. 08. 2024
- Need to paint correct but don't know what products to reach for? In this video we go through our polishes and compounds to give you an idea of what ones might work best for you!
⬇️Products Linked below⬇️
Polish: gyeonusa.com/collections/poli...
Compound: gyeonusa.com/collections/poli...
Compound+: gyeonusa.com/collections/poli...
Primer: gyeonusa.com/collections/poli...
Finish Pad: gyeonusa.com/collections/poli...
Polish Pad: gyeonusa.com/collections/poli...
Cut Pad: gyeonusa.com/collections/poli...
Heavy Cut Pad: gyeonusa.com/collections/poli...
⬇️Social Media Channels⬇️
Website gyeonusa.com/
Instagram / gyeon.usa
Facebook / gyeonusa
TikTok / gyeonusa
00:00 - Intro
00:15 - Polishing Tips
01:45 - Gyeon Polishes
03:49 - Gyeon Pads
05:34 - Scenarios - Auta a dopravní prostředky
What a grate video , now i know what brand im getting when for car detailing
Best polishing system on modern market. Like in the best times of 3M 15 years ago. IMHO.
Thanks for the in depth on the polishes and pads. For the primer polish as stated if someone does not have time it can be panel wiped. Will the panel wipe remove the SiO2?
Yes it can! By using your surface prep of choice like Gyeon Prep for example, you can wipe the car down and coat like normal before the 24 hours!
Picking up a new Tundra, what shall I use to prep my new vehicle paint before applying your ceramic products? Thx!
Will you be doing a full paint correction on it?
@@gyeonusa yes
@@AshevilleCruzn then we recommend clay bars, clay lube, polish, pad, prep (degreaser). In addition to normal wash products!
Can gyeon primmer be used before applying a graphene coating without waiting for 24hrs
Yes it can! By using your surface prep of choice like Gyeon Prep for example, you can wipe the car down and coat like normal before the 24 hours!
With the primer does it need to be wiped off immediately
We would recommend wiping it off like you normally would but get all of it off, then let it sit!
Is ppf renew & primer same ? Because both says can also be applied at a foundation of Ceramic Coating. Pls reply
They do very different things. Primer is a polish that can take a coating on top after 24 hours. PPF renew is a chemical process to restore and renew old paint protection film.
Is Primer enough to remove an old coating to prepare for a new one?
Yes, even light polishes like Primer should remove any sort of ceramic coating or sealant when its used with a orbital or rotary polisher
Hi, if I’m using primer before applying CanCoat, how many finishing pads would you recommend using for a Ford Bronco?
You should be able to use just a single pad with primer as long as its in good shape initially. Since its not removing a lot of material and should be the light last step. Just keep cleaning it with a brush when necessary!
What do you lose if you wipe off Primer? Is it the SiO2? Can you apply a tradional sealant over it. I am looking for a one step finishing polish (very light cut to remove surface things like light water spots. etc) that the prep spray never can remove and then go to non-Si02 or Si02 based product.
So you should wipe off primer! You should use it like any other polish. But if you want to fully remove it with a degreasing product like Gyeon Prep to coat shortly after you use it, then you can. You are able to apply a traditional sealant over it.