My hats off to you guys who make the 16 Revo even faster, I tried it out with two Nickels running at the same time and it was to fast for my blood and I drive powerful cars exclusively, kudos chaps.
MrAlexsalm my antenna did the same. Al you have to do is strip about 1/2 an inch of the black casing on the antenna wire to expose the white wire inside and the range will be back to brand-new. You can even pull the excess into the reciever box and make the antenna fit under the body and the range will be the same and yoy wont have to worry about ripping it again :-) .
I actually run two nimhs in series with the stock 28t pinion... and my motor gets slightly warm... but then again it's like 2 degrees outside right now, lol.
You can also cut a small hole or run a ram air little tube blowing air on the motor Heat sink made a big difference.. We cut the windshield area out so a huge hole This is our basher body, we have a show body revo too This was a good revo Motors are 80 $ cdn We subbed
@TriggerRCTV hey I have this system in my losing mini 8ight out if a truck a friend of mine bought a month ago. He also gave me a 3s lipo and when it drives it was jittery/slow with throttle. Steering was 100% alright but throttle would cut out and the ESC flashes LVC red. The battery popped yesterday when I was trying to get it to work because it overheated. I ordered a turnigy nanotech 2s lipo this time
the stock pinion has about 28 teeth and this one wich comes in the box has 23 teeth, also you can change the spur gear (stck one has 55 t.) for smaller ones (traxxas has 50t. and 45.). but you can look for gears for example on hot racing web site
Thanks for the vid bro. I Just got mine last week and I upgraded the batteries right away. I'll do the pinion gear as soon as if feel like I need to so your video was very informative on how to do this. However, i wanted to ask you something. I noticed the added weight to the car after adding another battery. when I take jumps it bottoms out a lot.I was wondering if you had this issue and if so what you did to stop it the bottom of the car from hitting the ground so much. Not sure if I need tighter springs or better shocks.
Could quite make out the part where you recommend or don't recommend switxhboit the pinion gear ? Just got this car and its first rc for me great video !
Hi dear I have a question for you I have the same car and I'm wondering if I can upgrade the small gear even though I'm using one battery just leaving ready for two baths ?
@Peace Mon! I was thinking the same thing? What batteries did he use? Iam very confused, can you do that same what 2 regular batteries or 3 lipid? I keep let me know i just got one for my son, it has the tsm & ID . Thanks in advance
Speed gear in this particular car is actually smaller than the normal. They do this because they expect you use two nimh in series. Normally speed gears are bigger
That's coz normally when people go higher volts like from 4s to 6s, you might have to gear down a touch depending on the motor, as you might get heat issues quickly.
I run mine on 28t pinion and 43t metal spur and 2s or 3s lipo. If that's not 'screaming fast' idk what is. It prob goes over 90kmh if had balanced tires
ok,,I made a CUSTOM Integy MERV VXL,,Iys about twice the weight as it was lol but it BEAUTIFUL!!-BUT I'm running Summit Rims/Tires on it,,(have YET to change ANY gearing,,Cause it seems like I wouldn't need to since the Tires are twice the size,And the RC itself weighs more,,Soo ANY IDEAS on what/What gearing I should run,,Iys want SOME SPEED(Wheelies)But I'll give up speed to be able to drive Longer/And go slower threw rocks/Sandy areas!!!AND I'm running Summit Tires on my Revo VXL So since them being twice the size,,Should I jeep the gearing all stock,,If any ideas/Tips/Tricks,,MORE THAN HAPPY TO HEAR THEM ALL!!THANKS ALOT GUYS!!!! PEACE LOVE & RC
Anonymous i put a hobbywing max10 and 3652 4000kv motor 45/28 gearing and get speeds of 62mph, it’s very smooth and never gets warm. I also put on a dusty motors guard to stop all dirt getting in.
well it is really hot u said, what batteries are you using and how long did it tske to get that hot. I am thinking of buying an e revo vxl that's y I am asking LOL
Calvin Burton some people do but you’re only intended to use the series with NiMH. The series adapter actually blocks you from using lipo with the new ID packs.
I have a feeling bud if you put a 6 s battery set up in there the electronic system will fry. I'm new to the hobby but I take it super seriously as I have a Merv and a box of parts batteries the whole bit that cost $1300 dollars Still I am a newbie to the RCCraze. I love it. Have my nerve now for not even 2 weeks and blew the rear bloody dif gears. But more will be coming. Anyways I was told by the guys when I bought my car the speed controller will not take 6s. Only 2 of the 3s cells in (parallel). Buy at my own risk. Series to make 6s (NO). Thanks for the vid it was good.
yo, where did you buy the 2 battery attachment thing and also do you have to have a new pinion gear or can you just add another battery to it pls let me know so I can decide if I should buy the e-Revo thnx :)
Aabeg Rasheed you can buy em on any rc hobby online or on ebay get the series plug wich gives you dynamite power but i think they forgot to mention that the series plug and paralel plugs only work on limh batteries the nickel met batteries only dont use lipos with that but you wont need that if u invest and get a couple killer lipo batteries one lipo blows awzy 2 of the other running in series
If you run the car in series without changing the gear it will over heat in like 10min that's why they recommend switching it. If you plan to just run it in parallel mode or a single 2s you don't really have to change the gear.
Great Video! but isn´t it a bit too much power for the little Differential gears. When I drive with my Summit 1/16 with much power the Differential gears breaks...
The diff ring and pinion gear themselves are pretty good actually, still though, given that they are in plastic bulkheads, shimming them can do wonders in helping to keep the gears from skipping and in good condition
Be careful, whit the in series connector, you can only connect two nimh (1200 mah, 7,2V) batteries, because the maximum voltage that those awesome cars supports is someting like 14,4V. Using Lipo batteries you can only use the parallel connector.
Ok so i have a question. The one i have isnt a brushless, its brushed. Can i still usevteo batteries? It has the spit for two batteries. Im looking to get longer run time until i upgrade to a brushless. This is my furst electric one so im a bit cautious on it. My other two are gas and it of course just uses one batter it doesn't run the motor so. Any help would be appreciated and if anyone can give me ideas on what all i will need for the brushless upgrade. I know the motor and the ESC. Im just wondering if i need to update the Transmitter, receiver, transmission, motor mount (to fit the brushless motor), batteries.... help please!
I run the 28T on one 2s lipo and i get 35 minute run times with an average temp of 180F on the motor and 170 on the esc after a run. damage begins at around 215 F It hits about 40-45 MPH. Even on 2s and reduced torque, I end up stripping the differentials, usually the rear.
I-Know-My-Username-Is-Really-Long-But-I-Dont-Care-Because-Your-Opinion-Isnt-Worth-Jizz it's the velineon brushless motor system it comes with. from what i've read, it uses sintered samarium magnets.
It only hits about 35mph on 2s, 50 mph on 3s. This video is useless, why cook it with 4s even downgeared when you can hit 80 on 3s which is the most the speedy can safely handle.
You run 4s n think people could use 6s no. Your advice sux. It's a 3s max system. My mate cooked his running 2 2s in series. 3s is crazy fast anyway. Gives 80 with heaps of torque. Why would you try n change that.
I do Marine grease just a little dab and it works itself aroun. I do this in my e revo 2.0 kraton 8s x Maxx platinum e revo 3.3 Maxx with wide kit and soon the new ryft
Try two 2s lipo with the series connector and I just run the same brushless system but I still have regular gears. But damn that thing flys a lot faster then 80kmh more like 80mph
I put 2 2s in series and I ballooned the tires at 3/4 top speed. I don't suggest it but it was scary stupid fast but I learned my lesson after crashing into a tree broke two suspension arms
3s gives you 80kph I don't understand the point of this video n what he's doing. 4s is too much for this car just put 3s in with original gearing and you get 80kph without frying your speedy.
@@POLITICALYCORRECTify I have a mini slash that I run a 3s on a vxl3m, A Tekin 17.5 turn brushless, I just put a 25tooth pinion and a 50tooth spur and can only get a top speed of 33. what am I doing wrong here?
@@POLITICALYCORRECTify mph. Im not sure. A quick google search didn't give me much other than a 17.5 turn motor on 131 Watts = 2500kv on 7.2V system. I bought it with this motor in it so don't know much about it.
@@xspower4u might just be a lower geared car not sure Ive never seen a mini slash. Does seem a little slow though, go onto an RC forum and look for a post on it, or you can put your own post up ask anyone if they got the same car and what speed they get out of it.
careful jumping it that is how i blew my fi®st diff landing hard w the throttle still pushed in but otherwise it is a great car just dont land it w the throttle pinned n u will be ok
Roc Hale you buy a shim kit from associated, very very thin washers and put them either side of the diff and hopefuly fixes the problem, youtube search "e revo shim" or similar and you should find a guy that does a full tutorial, if you cant find him, come back here and comment
Hi there I rollover my car couple few times and I lost maybe an inch and a half of the antenna wire and I'm losing signal I only get 25 to 30 feet of all signal on my radio anybody has experience this problem or any solution for this ?
you cant run it on 4s u will burn up the (esc)so parallel is a non option series is tho but u have to put it in non lipo mode and risk damaging your battery if you dont have a lipo beeper
My hats off to you guys who make the 16 Revo even faster, I tried it out with two Nickels running at the same time and it was to fast for my blood and I drive powerful cars exclusively, kudos chaps.
Very sturdy platform if you can look at 10yr old video and they're still relevant. Got mine a month ago all of this still applies 👍🏽
if its not broke why fix it lmao
Good to know. Mine is on its way!
Thanks Dave was about to guess with gear to gear gap, u saved me time and money
This video really helped a lot, thank you ! :)
MrAlexsalm my antenna did the same. Al you have to do is strip about 1/2 an inch of the black casing on the antenna wire to expose the white wire inside and the range will be back to brand-new. You can even pull the excess into the reciever box and make the antenna fit under the body and the range will be the same and yoy wont have to worry about ripping it again :-) .
Cool Video!
I actually run two nimhs in series with the stock 28t pinion... and my motor gets slightly warm... but then again it's like 2 degrees outside right now, lol.
You can also cut a small hole or run a ram air little tube blowing air on the motor
Heat sink made a big difference.. We cut the windshield area out so a huge hole
This is our basher body, we have a show body revo too
This was a good revo
Motors are 80 $ cdn
We subbed
great video thanks
@TriggerRCTV hey I have this system in my losing mini 8ight out if a truck a friend of mine bought a month ago. He also gave me a 3s lipo and when it drives it was jittery/slow with throttle. Steering was 100% alright but throttle would cut out and the ESC flashes LVC red. The battery popped yesterday when I was trying to get it to work because it overheated. I ordered a turnigy nanotech 2s lipo this time
Nice Video
Haha ding dong!! Classic!! Great info!!
the stock pinion has about 28 teeth and this one wich comes in the box has 23 teeth, also you can change the spur gear (stck one has 55 t.) for smaller ones (traxxas has 50t. and 45.). but you can look for gears for example on hot racing web site
Thanks for the vid bro. I Just got mine last week and I upgraded the batteries right away. I'll do the pinion gear as soon as if feel like I need to so your video was very informative on how to do this. However, i wanted to ask you something. I noticed the added weight to the car after adding another battery. when I take jumps it bottoms out a lot.I was wondering if you had this issue and if so what you did to stop it the bottom of the car from hitting the ground so much. Not sure if I need tighter springs or better shocks.
You need thick oil but they still bottom out hard.
So helpful
Could quite make out the part where you recommend or don't recommend switxhboit the pinion gear ? Just got this car and its first rc for me great video !
Good video sir
That's FAST! WOW! 2 Fast for me. I like it though. I Just Subscribed to your channel.
cool vid
Is that ALL throttle management keeping that front end down at those speeds?
do you recommend putting the smaller pinon gear in out of the box? with out two lipos or y connectors?
can you tell us what batteries and what penion gear size pls
knowledge thks.
Nice
Hi dear I have a question for you I have the same car and I'm wondering if I can upgrade the small gear even though I'm using one battery just leaving ready for two baths ?
Coooool Vid!! What Size Pinion Gear Did U Use & What Size Battery Pack?? (Lipo Or Nimh)
@Peace Mon! I was thinking the same thing? What batteries did he use? Iam very confused, can you do that same what 2 regular batteries or 3 lipid? I keep let me know i just got one for my son, it has the tsm & ID . Thanks in advance
@@vitodambra72 2 nimh 1200mah, this car cant handle 2 limpos only 1. Have you got this car? Im thinking to buy 1 so let me if its a good car
I wish I knew this sooner. I ended up burning up my motor and esc after running 3s Lipo with the stock pinion.
Wow Great video......Would this mod work on the GP Toys 912s Lucerin with 390 motor?
Question? What is the STOCK pinion in the E Revo? What is the pinon to change it to in the video? You gave no pinion size?
Speed gear in this particular car is actually smaller than the normal. They do this because they expect you use two nimh in series. Normally speed gears are bigger
yeah, other videos i've watched sat a bigger pinion give more speed
That's coz normally when people go higher volts like from 4s to 6s, you might have to gear down a touch depending on the motor, as you might get heat issues quickly.
What two batteries in series did you use and how did you mount them? thanks.
what was the pinion you bought and the battery and where, can you send a link directly showing what I need please
I run mine on 28t pinion and 43t metal spur and 2s or 3s lipo. If that's not 'screaming fast' idk what is. It prob goes over 90kmh if had balanced tires
What did you have to purchase separately to make it go faster?
Thanks
I have the Kyle Busch 1/16 truck and I am not sure if they use the same spur gear. What spur gear size are you using?
I DON'T THINT SO.
Man that car is fast
if you put the smaller pinion on without any other mods, it will be slower. It will work fine tho. Nice cold motor
kleinbottled79 I thought he was backwards.
ok,,I made a CUSTOM Integy MERV VXL,,Iys about twice the weight as it was lol but it BEAUTIFUL!!-BUT I'm running Summit Rims/Tires on it,,(have YET to change ANY gearing,,Cause it seems like I wouldn't need to since the Tires are twice the size,And the RC itself weighs more,,Soo ANY IDEAS on what/What gearing I should run,,Iys want SOME SPEED(Wheelies)But I'll give up speed to be able to drive Longer/And go slower threw rocks/Sandy areas!!!AND I'm running Summit Tires on my Revo VXL So since them being twice the size,,Should I jeep the gearing all stock,,If any ideas/Tips/Tricks,,MORE THAN HAPPY TO HEAR THEM ALL!!THANKS ALOT GUYS!!!! PEACE LOVE & RC
What size are you using for the pin not the screw size but the gear ⚙️ size
Best upgrade is a widening kit so it doesn’t flip when turning
Anything else?
Anonymous i put a hobbywing max10 and 3652 4000kv motor 45/28 gearing and get speeds of 62mph, it’s very smooth and never gets warm. I also put on a dusty motors guard to stop all dirt getting in.
Just lower it lol
@@laboiville9492 you can't lower it properly. theres no official way to do it
@@lv7076 well shit, i think i havent put oil in the shocks lol
well it is really hot u said, what batteries are you using and how long did it tske to get that hot. I am thinking of buying an e revo vxl
that's y I am asking LOL
u could fry a egg on the motor and i am running it on 2s
I don't have any heating issues with mine, and I'm running it on 2s.
What batteries did you use?
rustler vxl, 21/76. good for bashing, or am I gonna kill my motor? my esc never gets hot.
Whether you figured out the hard way or not this won’t do 6s lipo. 2 3s packs in parallel yes, two in series no.
Will it do 4s?
Hope I can do that with my summit
Calvin Burton some people do but you’re only intended to use the series with NiMH. The series adapter actually blocks you from using lipo with the new ID packs.
@@dylanwhite6539 thanks, I think I am going to put a castle sidewinder 4 system instead
Calvin Burton that also max out at 3s just so you know.
I have a feeling bud if you put a 6 s battery set up in there the electronic system will fry.
I'm new to the hobby but I take it super seriously as I have a Merv and a box of parts batteries the whole bit that cost $1300 dollars
Still I am a newbie to the RCCraze.
I love it. Have my nerve now for not even 2 weeks and blew the rear bloody dif gears.
But more will be coming.
Anyways I was told by the guys when I bought my car the speed controller will not take 6s. Only 2 of the 3s cells in (parallel). Buy at my own risk.
Series to make 6s (NO).
Thanks for the vid it was good.
Shim your rear diff
yo, where did you buy the 2 battery attachment thing and also do you have to have a new pinion gear or can you just add another battery to it pls let me know so I can decide if I should buy the e-Revo thnx :)
Aabeg Rasheed you can buy em on any rc hobby online or on ebay get the series plug wich gives you dynamite power but i think they forgot to mention that the series plug and paralel plugs only work on limh batteries the nickel met batteries only dont use lipos with that but you wont need that if u invest and get a couple killer lipo batteries one lipo blows awzy 2 of the other running in series
If you run the car in series without changing the gear it will over heat in like 10min that's why they recommend switching it. If you plan to just run it in parallel mode or a single 2s you don't really have to change the gear.
Or a castle sidewinder esc and motor and dual 3s lipos series
Will this work on the 1/16 slash ?
what does the spur geear gotta be ?
What size is the pinion you installed?
Great Video! but isn´t it a bit too much power for the little Differential gears. When I drive with my Summit 1/16 with much power the Differential gears breaks...
The diff ring and pinion gear themselves are pretty good actually, still though, given that they are in plastic bulkheads, shimming them can do wonders in helping to keep the gears from skipping and in good condition
Be careful, whit the in series connector, you can only connect two nimh (1200 mah, 7,2V) batteries, because the maximum voltage that those awesome cars supports is someting like 14,4V. Using Lipo batteries you can only use the parallel connector.
lol fry it out and put a hobbywing 3665 in there for like $100
Put in a castle mamba micro x high kv motor and esc and it will go about 10 MPH faster
Ok so i have a question. The one i have isnt a brushless, its brushed. Can i still usevteo batteries? It has the spit for two batteries. Im looking to get longer run time until i upgrade to a brushless. This is my furst electric one so im a bit cautious on it. My other two are gas and it of course just uses one batter it doesn't run the motor so. Any help would be appreciated and if anyone can give me ideas on what all i will need for the brushless upgrade. I know the motor and the ESC. Im just wondering if i need to update the Transmitter, receiver, transmission, motor mount (to fit the brushless motor), batteries.... help please!
If you see this what size of pinion is it
Are these stock batteries ? if not which ones are they
Does it come with a ponion
I run the 28T on one 2s lipo and i get 35 minute run times with an average temp of 180F on the motor and 170 on the esc after a run. damage begins at around 215 F
It hits about 40-45 MPH.
Even on 2s and reduced torque, I end up stripping the differentials, usually the rear.
Actually, damage starts at 180 degrees Fahrenheit on the motor, especially with cheaper systems.
I-Know-My-Username-Is-Really-Long-But-I-Dont-Care-Because-Your-Opinion-Isnt-Worth-Jizz it's the velineon brushless motor system it comes with. from what i've read, it uses sintered samarium magnets.
***** That is correct, it reduces power at about 150F
It only hits about 35mph on 2s, 50 mph on 3s. This video is useless, why cook it with 4s even downgeared when you can hit 80 on 3s which is the most the speedy can safely handle.
You run 4s n think people could use 6s no. Your advice sux. It's a 3s max system. My mate cooked his running 2 2s in series. 3s is crazy fast anyway. Gives 80 with heaps of torque. Why would you try n change that.
Is it a 22t pinion gear ? Were did you Bay it ? :-D Plzzzz respons :-D i liked and supped
Is your revo drive in reverse? My rally it doesn’t
wow!... 8 years ago!...
What battery is it
Won’t this burn up the esc
Would it help to put a very light coat of grease on the teeth?? Would that help with extended life??
I do Marine grease just a little dab and it works itself aroun. I do this in my e revo 2.0 kraton 8s x Maxx platinum e revo 3.3 Maxx with wide kit and soon the new ryft
You us a 2 LIPO batteris?
What’s the motor shaft of that motor
Whats that pinion gear size?
Idk why am i have Titan 380 brushed motor in my mini slash :/ .. now i'm looking for a velineon motor and esc for my mini slash
Try two 2s lipo with the series connector and I just run the same brushless system but I still have regular gears. But damn that thing flys a lot faster then 80kmh more like 80mph
Hi dude!!, Does the pinion gear comes in the box? or do I have to buy this separately?
In the box
yes
What kind of pinion gear? Link? Part number?
Two NimH yeah? Cant hanle 4s can it?
What tooth gear is this
So why not have that in to start with?
Can I use the pinion gear from a redcat 550 motor will it make it faster?
no
Hi Dave what Pinion tooth count did you use?
45
I put 2 2s in series and I ballooned the tires at 3/4 top speed. I don't suggest it but it was scary stupid fast but I learned my lesson after crashing into a tree broke two suspension arms
+Joseph Guy Thats not much dmge lol but lucky
dp u need a fan to kepp it cool while running 3 lipos
can it run at 6s so 2 • 3s
by the way the paper thing doesn't work I always set my gearing by ear.
Do the connectors at 1:36 come with the car in the box ?
They do not.
I have the summit vxl. should thay be the same set up running series as same fast?
Yes same motor and platform
how many teeth is on that spur gear?
What gear is that? Link? Part number?
Did he say smaller pinion is the high speed ?
hey quick question what tooth spur gear are u using
undialed 55
I use the stock gear in series and I works fine and it still looks like it's going 50 mph
I also have a 3s lipo that I use
I put the high speed gear now
SUUUUHHWEEEEEET!!!
Got mine up to 81 mph with a bunch of carbon fiber upgrades and ran 4s in it
For those who are wondering 80 kmh is 50 mph
I can’t even handle that kind of speed with my mini E Revo 😅
3s gives you 80kph I don't understand the point of this video n what he's doing. 4s is too much for this car just put 3s in with original gearing and you get 80kph without frying your speedy.
@@POLITICALYCORRECTify I have a mini slash that I run a 3s on a vxl3m, A Tekin 17.5 turn brushless, I just put a 25tooth pinion and a 50tooth spur and can only get a top speed of 33. what am I doing wrong here?
@@xspower4u 33kph or miles? How many kV is your motor?
@@POLITICALYCORRECTify mph. Im not sure. A quick google search didn't give me much other than a 17.5 turn motor on 131 Watts = 2500kv on 7.2V system. I bought it with this motor in it so don't know much about it.
@@xspower4u might just be a lower geared car not sure Ive never seen a mini slash. Does seem a little slow though, go onto an RC forum and look for a post on it, or you can put your own post up ask anyone if they got the same car and what speed they get out of it.
careful jumping it that is how i blew my fi®st diff landing hard w the throttle still pushed in but otherwise it is a great car just dont land it w the throttle pinned n u will be ok
I'm kinda confused how are you running two batteries in series?. That's systems only rated for 3s tops. So your running 4s on that?.
+josh sprague No two NiMh batteries
I did this and my car makes a scratching sound when i drive it, any ideas?
You put the motor or gears badly and the gears are far from themselves. thats why it makes that sound.
yep need to shim the diffs did this yesterday!
What does shim mean?
Roc Hale you buy a shim kit from associated, very very thin washers and put them either side of the diff and hopefuly fixes the problem, youtube search "e revo shim" or similar and you should find a guy that does a full tutorial, if you cant find him, come back here and comment
I was my gear spur
Was this the brushless one or brushed
Most Traxxas 1/16 is brushless
Hi there I rollover my car couple few times and I lost maybe an inch and a half of the antenna wire and I'm losing signal I only get 25 to 30 feet of all signal on my radio anybody has experience this problem or any solution for this ?
Just strip a half inch of the black wire to expose the core of the wire, then it's like brand new
can u run Nimh with a lipo parallel?
No, you have the run the exact same type of battery. Some type, mah, and voltage.
Merv forever!
you cant run it on 4s u will burn up the (esc)so parallel is a non option series is tho but u have to put it in non lipo mode and risk damaging your battery if you dont have a lipo beeper
smaller is not faster your gonna burn up the motor if u run it on 4s
lock tight them screws