Video není dostupné.
Omlouváme se.
First ECUTEK GR86 TUNED on E85!!!
Vložit
- čas přidán 29. 10. 2022
- Our wait is over! ECUTEK has released their beta tuning software to their authorized tuners and you know we are right on it! We've got the GR86 strapped to the dyno and we're going to see how much more power we can squeeze out of this FA24 with E85!
►Boosted Performance Tuning: www.boostedper...
2022 TOYOTA GR86 MOD LIST:
»$35DIY 4th Brake Light: amzn.to/3SRG3L8
»Positaps: amzn.to/3SRAQTl
Sayber Design Carbon Fiber Front Lip
FactionFab F-Spec Coilovers
AWE Touring Edition Catback Exhaust
Cusco Strut Tower Bar Front
Cusco Strut Tower Bar Rear
Cusco Adjustable Lower Control Arms
Cusco Adjustable Toe Arms
Cusco Trailing Arms
Cusco Rear Upper Lateral Control Arms
Yokohama Advan TCIII 18x9.5 +45
Kumho V730 255/35r18
ECUTEK E85 Tune
FOLLOW ME:
►Instagram: / thekevinvo
»Music I use: share.epidemic...
Disclaimer: As an Amazon Associate I earn from qualifying purchases.
221 wheel without mods on just 91 makes me so happy to hear.
Yeah, I'm more than happy with that.
Oh yea when I do FBO and a tune I’m gonna hit 260 wheel fro sure
@@S.E.T.4Life sure, with a FI kit. No way you hitting 260 with exhaust/intake. Would be nice.
@@daviddedos we’ll see man we’ll see
@@S.E.T.4Life 240-50 whp top with FBO on e85 your looking at cams rods and head work if you want anything beyond those power output via NA route that gets reall expensive
The first gens didn't get much tuned completely stock either but headers+tune gave a much more significant gain. Can't wait to see the 93/e85 results with headers installed. Let's shoot for 235, nice video!
its already throwing down 225-230 e85 with only catback a full fbo going by last gen standard you can look foward to extra 15-20hp so 240-50 whp is in reach it make sense really last gen fbo on e85 will max out at 200-10whp this should max out at 240-50.
@@patthonsirilim5739 Original commentator stated that 1st gens weren’t as optimized as current gen. Also, toybaru seem to have focused a lot on the current gen’s header design. Larger diameter and lighter. 235 sounds about right.
@@daviddedos yup on FB a stock headers cat delete on e85 has got 236hp 192 trq. On dyno already. It does include greedy intake. It sounds quite loud... maybe cat delete is a little too loud for some folks.
Reasonable to expect 240+ is possible
My 2012 made 205whp with HKS EL header and E85 tune
2.0 FBO/E85 = ~205whp
2.4 FBO /E85 = ~ 245whp
Loved my car at that stage and 2600 pounds but high g turns blew 2 motors
@@RedC63AMGI had a ‘13 frs fbo and no tune unfortunately and I spun a bearing shortly after the recall, the rtv silicone clogged my oil pick up tube, I went and bought a 2019 86 trd this time trying to do it right, would you recommend a fuel pump upgrade and fuel injectors even though the fa has direct injection? My friend recommended me a tuner from counter space garage and recommended I buy a tune for fbo e85 and he can let me use his ecutek to flash my ecu
YESSSS!!! Can’t wait for the headers and intake
So much potential Kevin as you said! It's gonna be a blast!
I wonder if OFT will be making something for these new cars. Great video! Really excited to finally tune my car hopefully in the near future!
I had read they are working for it
Awesome work!! Glad ECUtek finally felt comfortable releasing something
Great R&D effort, guys! Can't wait to see more progress!
This is exciting news for the new car indeed! And congrats on publishing it early and before other content creators!
headers are gonna make all the difference. excited to see how it goes
I'm with ya! I wanna see a turbo and tune!
awesome video as always Kev!! Bring on the mods
Good to see, but considering the infancy of the RTV issues, I’d be leaving the ECU and emissions equipment alone during the warranty period.
Yup.
Header was making most horse power difference on gt86 bolton mods wise I believe
I would love to see if this can get to ~250 whp with bolt Ins and no forced induction
Been 5 months, any news? Could it do 250? I’ve seen Nxt Lvl got a turbo kit that can do 350 I think but idk i wanna go that route rn
if you can get 230 with a header, that is just perfect for canyon and street power, fast enough on the most track to be super fun too.
Yep that’s roughly what I’m sitting at in my 2019 Civic Si with exhaust and stage 1 tsp tune. It really is perfect for a daily driver with occasional spirited driving. Also can still hurt some feelings in the straights. 230 whp in a 2800 pound car is a lot quicker than most people think
@@TheBeebop420 yeah! power/weight is what matters. On paper it'll be roughly equivalent to the previous gen WRX, which is what I have. It's just enough to feel quick. Though honestly I'd love to make a bit more. I've been eyeing the Z and supra for my next upgrade, but with availability what it is I'm seriously considering getting a gr86 and adding a turbo/supercharger. Looking forward to seeing what people manage to do with these.
@@emissarygw2264 Just turbo it. But make sure you use forged internals. Build it properly. Built Subaru engines are actually very good. It's when people don't have built engines, and then just strap on a turbo or up the boost that they then get blown motors etc and start blaming Subaru for being unreliable lol. Do it once and do it properly. It won't be cheap though, but honestly worth it and better than trying to chase minor gains from NA. I have gen 2 on the way, and 100% will turbo it, but it's long term goal. Won't turbo it anytime soon, prob 5 years away. If this is a car you want to keep long term, and you want it to be a unique car etc, then this is the way to go. Honestly, legit thinking of putting an EJ in eventually also, since EJ is way better than FA for mods. That is backup scenario, incase the FA is just too expensive to work with, we'll see. If you want the easy option, just go with the Z or Supra. BRZ/86 path will be lots of work.
@@Jez4prez1 Unfortunately the Z chassis is outdated trash. 86 chassis with the Z engine would be the ideal sports car.
@@MCHellshit that would be a beast, borderline mini supercar haha.
MMMMMMM I cant wait to see more of these going around the track ESPECIALLY when they start getting some boost... man they'll be spicy
Holy crap that sound, how you got your GR86 to have the gurgl sounds? Also I always thought E85 was bad for a regular engine, I am very confused.
If its not tuned for it, of course it is. Stock ECM Parameters aren't capable of delivering the volume of fuel necessary to run E85 at Stochio.
@Boosted Performance Tuning Nice to know, if it wasn't my daily I'd probably go for one of these tunes. :)
I’m willing to bet with headers & an intake you could crack the 230 mark ! Possibly on 91 also. Just the thought of having an 86 with just fbo and a custom tune pushing nearly 230whp /!: almost 200 wtq. Wow oh wow what a fun car that will be on the street. Solid, reliable, controllable and responsive all on a car that’s about 2800lbs! sign me up 😤😤
I've had many modded Subaru engines in my past, I learned to distrust them a long time ago.
Damn that exhaust sounds surprisingly good! Seems likely to crack 230 whp with a charcoal filter delete and a K&N.
K&N drop in doesn’t affect anything from my experience. The charcoal removal however does.
I was on the fence with that awe exhaust. I think this video sold it haha
Here in France we have easy access to 98, makes me happy to know that i might just get more free power.
YES...!! Show me the flex fuel kit and take my money.
Drop in filter and uncatted header!
Good show 👍😁👍
great content shout out to ECUTEK
Shhheeessss that's great. I wanna see how it goes with the header and intake. It will be a blast plus the turbo for sure it will so much fun 😁😁😁
at 6:26 you said the FR-S made 198/158 on E85 'with full bolt ons', does that include headers, testpipe, full exhaust and intake?
Yes
Awsome video keep up the great work!!
Suggetion: installing a new radio with a better sound system (im thinking of importing a jdm gr86 to the uk due to it selling out in 90 min but the stock radio may not reach uk regulations but at the same time with a new radio/sound system i would still like to keep the oem reverse camera)
Awesome video
The car sounds really nice! Is it possible to programm different tunes depending on the mode? Like having the more potent tune only on track mode?
Subbed to your channel, love seeing the updates. Good content mate keep it up! Would love to see one of these turbo eventually.
This is exciting
Can't wait to see it tuned with FBO!
The EU version delivers 235 stock, I thought the US will get the same lol...
Exactly, this confused me because I just came from Toyota Denmark's page where it said 235HP.
Did you pull the charcoal filter out of the intake?
Also who says "ekutek" instead of e c u tek. ? Maybe i'm the odd one out.
Makes sense that not a ton of power could be made if they tuned it to the max and let knock sensors dial it back.
Do a complete fuel system from back to front.
$64 million question, and maybe addressed in comments below. Was Graham able to eliminate the rev hang in the stock map? God as my witness I'd pay $500 for a tune just if it did that. Any info?
I was thinking e85 was going to have alittle more of an effect with the high CR. Still it performed pretty good, can't wait for some more mods
I'm not super concerned about peak power. But does the tune make the engine more responsive, specifically at lower rpms?
On the other side I have to do a song and dance on my Kona N every time I fill up to get full boost even tho I plan to always use premium 91.
Great vid for reference 👍
Can't wait to see with fbo
That sayber lip lookin good
Better if you use e30 blend, actually better performance than just 91, but better fuel economy than full e85.
Question is whether this much power is worth voiding your powertrain warranty. Imma go on a limb and say no.
People who do this, don’t care about warranty. 🫡👍
In that case you are wrong...!! Its a tuner car. This is what it was made for. Dont like mods, get a camry.
FYI most buyers don't tune their sportscars. Personally I'd have no problem getting a tried turbo for these at some point if it offers significant gains. The ROI isn't there with relatively low gains like this for me.
@@milesfathi IDK what kind of sports car people you hang out with, but I have owned a pretty wide variety. Mustang, corvette, mazdaspeed 3, focus st, SRT4, GTI, cayman, Q60, M3, etc. Every online community, car meet or random guy I run into at a gas station is tuned. Even my wifes mustang and SHO taurus have a tune. The manufacturer tends to leave a lot on the table with little to no risk. The amount of power added doesnt sound like much. But you have to consider the starting point. We are looking at an almost 10% increase in power here with no physical parts. No boost or excessive stress on the internals. In all honesty the engine will be running safer against knock and cooler from the E85. This is a win.
221 is good for 91. The base tune that some boost kits came out for the 1st gen were limited to that and felt really quick! I wonder what headers will do with this on high octane gas
I'm just tryna get some burble in my tune 😮💨
*cries in my 86 with full bolt-ons and not breaking 200hp because I don't have access to e85 here.....😭
Legit love the setup and stance. Really making me wanna get one 😊
No attempt to flatten the torque curve? Looks pretty good otherwise, area under the curve is what matters, not so much the peak numbers 👍
What exhaust are you using in this video , Kev? It sounds really good
I can tell that your 86 already crackles and pops a lot but is there a pops and bangs tune that supports the 2022 brz or 86 platform?
What are your thoughts that the aftermarket support will continue for 2nd Gen, with the rumors of the 3rd Gen 86 being talked about?
hope romraider can support the fa24!
I’d love to be able to see headers and plenum mods and see 260+
Hey, does Graham also work at Paragon on C8s?
Hello! I wonder if you can make a video how to activate gr86 alarm please? 🤣 does not work for me bruh
Oh shiiiiiiiiiiit ecu time!
I can see dealerships rubbing their hands for voiding warranties
I hear too much controversy with open flash and ecutek, my friend sent me some tuners that use ecutek and another friend says to go oft and I’m leaning towards oft because I don’t want to spend close to $800 on a tune and a license through ecutek
What exhaust you running?
He had a lot installed for review but the one he ended up putting back on is the awe touring
@@martinrps13 did he end up also taking off the cat? Or is that sound JUST from the cat-back exhaust?
Headers maybe a bigger throlle body and a cold air intake ?
What cat-back exhaust did you put on the car? And I wish you made a video on putting it on the car. And it sounds like if you took the cat out tho
It's an AWE Touring Edition catback exhaust. This is a catless setup.
What certification u need to enter this field w cars ? Or info lmk
Did the na fa24 cheapen out on the rods? I know the boosted fa24s can handle a mighty amount of power with boost and the DI only is the limit for those guys. The BRZ/Toyota guys have port and DI but the toilet paper transmission is probably going to be your limiting factor.
The FA24 doesn't have the offset rod design like the previous gen so I'm hoping it is able to hold more power as well.
this car with full bolt on on e85 probally throwing down 240-50 whp
It’s got about 80-130 hp potential, not that much.
Is there no way to add a more aggressive camshaft setup?
You can, but still not going to see a massive improvement.
Did the horrible throttle response get fixed with the tune?
Damn that is beat
O geez that is way low numbers I laughed the complete video thanks
Fast little ripper
Make super charger kit
Delicious Tuning did a dyno tune on 91 octane (completely stock), and they were able to get 226.1whp.
Wonder how much more they can get on e85 + FBO
There's also something our shop likes to call, the "engine lottery", where some engines just hit higher numbers than others even on the same Dyno. On the first gens we've seen as high as 197whp and as low as 175whp.
How is it going guys, drew peacock here.
I’m surprised e85 only added like 8 hp over the 91 tune
Does anyone know what wheels this gr86 has on it?
Any help would be appreciated. Gonna pick one up soon.
czcams.com/video/X7w4tXJJmDU/video.html
I bet on e85 with intake and full exhaust you'll be looking at something better than 240 at the wheels, thats knocking on the door of 280 at the crank which puts the car in that magic land of 10 lbs/hp. Not a slow car no mo!
No issues running the E on the stock fuel system?
YAAAAAAAAAAAAAAAASSSSSS
UEL HEADERS ⁉️⁉️⁉️
Might be something we'll try later on.
Did he mod anything for the e85/flex Fuel......like better injectors, fuel pump, stronger fuel lines or even a flex Fuel sensor???
Nope, just tossed E85 in there.
@Kevin Vo oh my....well I'd assume the platform isn't build for e85 so long term it would need some extra bits n pieces right?
@@just.a.simplejoe should be just fine as long as you don't let the fuel sit in there.
@@just.a.simplejoethe pump and dual injection are up to the task in this platform just like the previous gen. I ran E85 exclusively for 5 years with zero fuel system changes or a flex sensor. No problems at all. Lots of people do E85 on these things with only a tune. It’s not like other platforms that require injectors and pump.
So it went from 221 to 227. Seems too little for E85. I saw Cobb has noticed this car will go from 209 to 223 with a bunch of runs but literally no tuning at all. Something tells me this is throwing everyone off when tuning.
I want to hit 350 hp, supercharged or N/A, swole is the goal
Fa24 won't do that n/a
how much did this cost G?
Did you take out the charcoal filter too ?
@Boosted Performance Tuning interesting. Saw another video that gave them like 5-10 more wheel hp taking that out.
lets see dynos with full bolt-ons and no E85
Improve it until it’s broken! That car just needs a nice v6.
It needs the grc 3 cylinder
Turbo or supercharger
Does a fluidampr "free up" some horsepower?
A what?
MOOOORRRRREEEEEE PPPPOOOOOWWWWEERRRR
Also delicious tunning got the same results as you but was only on 91 and you got that on e85 🤨
Some engines can just perform better than others on the dyno. Also depends on Dyno as each one reads differently. That's why we recommend using the same dyno as you build and tune your car. That way you can have something consistent.
Different dynos read differently. Even the same dyno could read differently on a different day due to a multitude of different variables.
How good does this car sound just with a cat back? Pops and crackles naturally
I reckon. 250whp with headers
Wishful thinking right there buddy
Hate to be a buzz kill but......... Not so encouraging to those who wont go "catless" and without access to E85. Best of luck though. Look forward to your results, in both numbers and drivability.
So does the tuner that helped you have his own ecutek or did you buy the ecutek and just gave it to him so he can tune because there’s other tuners who sell the ecutek with there tune and they’ve said only they can tune it and no one else can?
@Boosted Performance Tuning okay because delicious tunning is selling it but only with there tune which I thought the point of buying ecutek was to tune it yourself or take it to a reliable tuner
@@Snagz86 it isn't locked per tuner. Buying an Ecutek license allows you to flash the tune into the car, which stays with the car. But you need a tuner key to make changes to the file. It might be possible for you to make your own changes if Delicious is offering the Ecutek tuner key along with the license.
@@timmyt61 hmm so how can’t I get the key as soon as I set up ecutek
@@timmyt61 it’s called the rom file which is what tunners use to access my car and give me a tune so I don’t understand why I can’t go to another tuner
@@Snagz86 yes it is a rom file. No one said you cant go to another tuner. As long as the tuner has a key, they can make whatever changes you want.
Headers.
so this means we finally cracked the ecu on this??
yup, its just beta as of right now so probably another month or two
@@kirbo3346 niiice! gonna be interesting to see how much power these can take. hopefully the thinner cylinder walls aren’t a problem
@@reemeruxd I heard that the fa24 has thicker cylinder walls then the fa20?
Which front lip is that?
Looks like it's a Sayber Design Carbon Fiber Front Lip in the description's mod list.
wowwwww