Stumbled across your videos through total seal sharing this. And wow. Thank you so much for sharing your knowledge. 26 years old racer have a lot to learn and this information is priceless, can learn more here than my 4 years of engineering school hahaha!
Wow! Your knowledge and experience is priceless. I’m an idiot and you were able to get me to clearly understand. I am very happy I came across your channel. I have been doing my research and I think this has persuaded me to go with star racing products for my building components. Thanks so much for the insight on the “red and blue” oil pumps too , I have a 21 FXLRS and now maybe going SE high flow since it was designed /released after the 2020 oil pumps.
@@ironerebus_syl12 well fuelmoto has a reasonably priced star racing 577 cam. I talked to George on IG. He said all you need are the cams and adjustable pushrods. Fuelmoto kit has that plus cam bearing. I’ve ordered will be here tomorrow. Hoping to get it all installed and dynod by end of next week.
Phenomenal video very detailed and informative. I’d like some suggestions I have a 114 m8 and I want to buy this cam from you and also that compensator what are your suggestions what would you do to marry all these components for the best performance I can get I already purchased a fullsac performance header pipe what other components should I change I was about to buy an s&s oil pump and plate until I seen this video I just want to do a stage 2 for now please help and thank you again for taking out your time to educate the public .
good video as far as the stock comp ramp i put one in a vise at work and beat it with a mull and could not break it throw it down on concrete not a mark
Wow thank you for sharing this information it is greatly appreciated.I just bought your 30/30 cam and compensator I have a Fullsac performance header pipe going to order a kw muffler slip one and a se 64 mm intake manifold an Arlen ness 10 gauge air cleaner and throttle body and a thundermax to tune it and then eventually get it dyno tuned. What other recommendations do you have for me what else should I do to marry all these components to work together as best they can. Again thank you for all you do to educate the public.
What cam and intake and throttle body would you recommend with a 124 S&S kit it comes with a 550 cam what size intake and throttle body would you say ? 64 mm ? With a 550 cam ? Or ? 572 cam ? And Do you no what clutch is better Evolution industry’s or Recluse ? I was going to do a Dark horse compensator
I want to be able to have your 30/30 cam installed on my 2021 114" Harley. However, I'm being warned that because I have a 2 into 1 short side dump exhaust, that I will end up with LESS tq. & hp then stock in my usable rpm range. I don't need more than stock, but I sure don't want LESS! Advice? Anyone?
M8 130" ward +2 heads. SE Extreme breather. Khrome Werks 2-1-2 pipe. 6.5 injectors. Looking at Star 3/4 . What numbers can i expect ? Also at what rpms does it kick In? Thanks
@@atrain6389 interesting. I have a 21 fxlrs 122 kit. I haven’t been able to find any dyno charts specifically to that. I’d be curious to know your numbers if you’re willing to share them. I need to get wide bands and a few other components as well.
Love it, thank you for sharing your knowledge.
Thanks for doing Tech Talk Tuesday's Great info !!!!!
Great job. The 30/30 is exactly what the stock cam for the M8 should be.
Stumbled across your videos through total seal sharing this. And wow. Thank you so much for sharing your knowledge. 26 years old racer have a lot to learn and this information is priceless, can learn more here than my 4 years of engineering school hahaha!
Awesome info!
Wow! Your knowledge and experience is priceless. I’m an idiot and you were able to get me to clearly understand. I am very happy I came across your channel. I have been doing my research and I think this has persuaded me to go with star racing products for my building components. Thanks so much for the insight on the “red and blue” oil pumps too , I have a 21 FXLRS and now maybe going SE high flow since it was designed /released after the 2020 oil pumps.
So yea your video answered alot of the questions I had been researching for. Will be installing the 30 30 this week good job.
Really great discussion. Glad I found your channel.
thank you for all the info....it makes a big difference to me to know why
Greatly appreciate your knowledge.
great content thank you for sharing.
I’ve searched your tech talks and am not seeing it, but do you have a video like this discussing your 577 cams for the older Vtwins?
I can’t find anything either
@@ironerebus_syl12 well fuelmoto has a reasonably priced star racing 577 cam. I talked to George on IG. He said all you need are the cams and adjustable pushrods. Fuelmoto kit has that plus cam bearing. I’ve ordered will be here tomorrow. Hoping to get it all installed and dynod by end of next week.
i believe thank you
Phenomenal video very detailed and informative. I’d like some suggestions I have a 114 m8 and I want to buy this cam from you and also that compensator what are your suggestions what would you do to marry all these components for the best performance I can get I already purchased a fullsac performance header pipe what other components should I change I was about to buy an s&s oil pump and plate until I seen this video I just want to do a stage 2 for now please help and thank you again for taking out your time to educate the public .
I’ll take your opinion any day of the week 👍🏻🔥🔥
Are these cams yours. I mean your design. Thanks Buck Buchanan.
good video as far as the stock comp ramp i put one in a vise at work
and beat it with a mull and could not break it throw it down on concrete not a mark
Oh you start at 5:00 in TN 6:00 in Eastern TN now I got it.
Thanks for sharing your experience mr Bryce. Just asking how you determine how much valve lift for any combination.peace
Wow thank you for sharing this information it is greatly appreciated.I just bought your 30/30 cam and compensator I have a Fullsac performance header pipe going to order a kw muffler slip one and a se 64 mm intake manifold an Arlen ness 10 gauge air cleaner and throttle body and a thundermax to tune it and then eventually get it dyno tuned. What other recommendations do you have for me what else should I do to marry all these components to work together as best they can. Again thank you for all you do to educate the public.
Upgrade your Fuel Injectors, and get your manifold CNC by award Racing. Also Vent your crank case
What do you think about the Star racing F35a in a 131ci?
I wanna know what a 3/4 cam would do in a stock 114 with the spring upgrade needed to run it. Only injectors and only if needed.
I was wondering why you said enter at your own risk when using the roller rocker arms
Great video George! Now come back to Americus lol
What cam and intake and throttle body would you recommend with a
124 S&S kit it comes with a 550 cam what size intake and throttle body would you say ?
64 mm ? With a 550 cam ? Or ?
572 cam ?
And
Do you no what clutch is better
Evolution industry’s or
Recluse ?
I was going to do a
Dark horse compensator
👍####
I want to be able to have your 30/30 cam installed on my 2021 114" Harley. However, I'm being warned that because I have a 2 into 1 short side dump exhaust, that I will end up with LESS tq. & hp then stock in my usable rpm range. I don't need more than stock, but I sure don't want LESS! Advice? Anyone?
M8 130" ward +2 heads. SE Extreme breather. Khrome Werks 2-1-2 pipe. 6.5 injectors.
Looking at Star 3/4 . What numbers can i expect ?
Also at what rpms does it kick In?
Thanks
Like these videos
Would the 485 be a good fit for my M8 107 ?
Hi I came in late, have question wood star 3030 585 match with stage 3 screaming eagle
👍
This is Jimmie again I have 3. Harley Davison motors
So are stock m8 114 springs ok with the 485 cam?
Yes. I’m getting ready to run the 485 cam in my S.E Stage 3 122 kit. Kept the stock heads/springs from my 114 and Mr.Bryce said it’ll run
Andre Sabbath did you get that 485 in the 112? If so what kind of feedback do you have? Thanks
@@atrain6389 interesting. I have a 21 fxlrs 122 kit. I haven’t been able to find any dyno charts specifically to that. I’d be curious to know your numbers if you’re willing to share them. I need to get wide bands and a few other components as well.
I forgot it's 114 harley davidson. Dennis
Hi
My question is 3030 or send 475 which one is better
30/30
@@allan9584able agreed hands down
Hello my brother my name is jimmie
Don't agree about pumps ,S&S for example,are way better scavenge than stock engine runs cooler too
I think he was speaking of the older versions of the aftermarket plates and pumps.