How to Fix a Strap Button and Install Strap Locks on Your Electric Guitar
Vložit
- čas přidán 1. 09. 2021
- In this episode of “Gibson’s Guide to Guitar Setup and Maintenance,” players, tinkerers and guitar geeks get a crash course on guitar strap pin replacement. Gibson Master Luthier, Jim DeCola, shares some closely guarded guitar tech tips for replacing strap pins and other sage advice.
A strap pin isn’t the most exciting piece of hardware on a guitar, but without a properly seated guitar strap pin, literally, all hell would break loose. Imagine Pete Townshend windmilling on stage, and suddenly, his strap pin fails. Undoubtedly chaos would ensue and some unfortunate guitar tech would probably be jettisoned from the tour bus. Fortunately, there’s an easy way to avoid any drama or damage.
Jim DeCola will walk you through the safe repair and or replacement of some of the more popular types of guitar strap pins. He’ll also go over the process of tightening up the holes you screw the pins into by using, of all things, toothpicks. Some of the techniques Jim covers can also be used for tightening the holes for pickguards and control knobs. So, grab a #2 Phillips screwdriver, some wood, or Elmer’s glue, and let’s do this.
For more detailed information on guitar setup and maintenance, or more complicated DIY repairs, be sure to check out Gibson’s FREE Virtual Guitar Tech service at www.gibson.com/Support/Virtua....
#gibson #gibsontv #guitarmaintenance
SHOP MERCH AND GUITAR CARE PRODUCTS:
Replacement Strap Button: www.gibson.com/Gear/Strap-But...
Guitar Straps: www.gibson.com/Gear/Straps
Premium Polishing Cloth: www.gibson.com/Gear/Cleaning-...
Gibson Guitar Polish: www.gibson.com/Gear/Cleaning-...
Guitar Care Kit: www.gibson.com/Gear/Cleaning-...
CONNECT WITH GIBSON
www.gibson.com/
/ gibson
/ gibsonguitar
/ gibsonguitar
SHOP GIBSON BRANDS
www.gibson.com/
www.epiphone.com/
www.kramerguitars.com/
www.steinberger.com/
www.krkmusic.com/
www.mesaboogie.com
ABOUT GIBSON BRANDS
Gibson, the world’s most iconic guitar brand, has shaped the sounds of generations of musicians and music lovers across genres for more than 100 years. Founded in 1894 and headquartered in Nashville, TN, with a premier acoustic facility in Bozeman, MT, Gibson Brands has a legacy of world-class craftsmanship, legendary music partnerships, and progressive product evolution that is unrivaled among musical instrument companies. The Gibson Brands portfolio includes Gibson, the number one guitar brand, as well as many of the most beloved and recognizable music brands, including Epiphone, Kramer, Steinberger, MESA/Boogie and the Gibson Pro Audio Division, KRK Systems. Gibson Brands is dedicated to quality, innovation, and sound excellence so that music lovers for generations to come will continue to experience music shaped by Gibson Brands. - Zábava
I've been fixing my strap buttons like this for 50 years. My only addition to this it that I first break off the toothpicks, pull them out and reinsert them fat end first and tapered end near the surface so that the screw seats better. Just my $.02.....Great video!
"Dual taper-ended luthier dowel rods." lol - I'm going to have to remember that one, Jim!
Pretentious terms for basic shit
I cant stress enough how nice is to see Gibson getting in the real world. I would love to see polepieces adjustment (I know theres a pickup video, but it’s missing the polepieces)
Thanks for the suggestion!
This would be great, looking for this for week's now, would be great if Gibson themselves give us a clue 🧩😅
Yeah this video is pretty realistic. I'm glad it's not that fuckin Butthead looking dude.
The toothpick is fine, but sometimes it may not last very long as it a soft wood. I usually cut off a sliver of wood from a broken drum stick and use it along with the wood glue. The maple from the drum stick is a much harder wood and thus is more secure and stronger.
Thank you GTV and JD! Schaller - another name for these locks are, "Hey man, you got a phillips I can borrow?". The screws they come with are much too short. However, better than no locks at all, so I standardized on Schaller and put them on all my gits and straps way back in the day. Next, you will find you constantly have to tighten the nut/washer combo on your strap. *Then* I bought my first Les Paul which came with Dunlops. Mind blown. Far superior, to say the least. Gigged four nights a week for 10+ years and never needed maintenance. No more phillips. No more checking and tightening a nut on the strap. Plus, the "button" portion is larger and provides better real estate for a standard strap should you find yourself in that situation. I hope this helps someone - cheers!
Hello please what is the dunlop do you use? Thanks
Been doing this for years.
Glad Gibson is validating the info.
Great Job Jim! I have been doing the same for strap buttons like this for 44 years, haven't had one come loose !
Jim's the only man i know who goes by you at work on a skateboard! You go Jim!
These are the exact things I always do to deal with a loose strap button, and to install Schaller locks on my straps.
Hi Mr. Jim. Could you please do a video showing how to reattach a pickguard that is detaching from the acoustic guitar? Thank you.
The Dunlop screw is slightly wider and potentially longer. Their instructions recommend drilling the hole slightly wider.
I scrape the screw on some hard soap to make it go in easier. Using Dunlops on over a dozen guitars. Some have been on for 30 years and even the strap portion is still good.
I have Dunlops and want to install them on my Epi 335. But, I'm scared of cracking my guitar. Any tips/advice for a semi hollow or is the block basically in the same position as a solid body so it's a moot point?
Does "hard soap" = "random brand of bar soap"?
Practical solution. Thank you.
Thanks, Jim. I've used toothpicks before but this always has me learning something new.
Awesome video thanks Jim and Gibson!
Used toothpicks all my life to correct screw loose issues. Learned that trick from my dad who worked at Chevrolet assembly plant in Detroit starting in 1946. Good post Gibson!
is it a temporary fix or will it last for life ?
@@rv6205 long time fix!
great video Jim for the guitar novice for sure. ive use the tooth picks and titebond to fix many guitars. being a les paul player myself for some 45 years, and the weight of the les pauls i always used the dunlop style strap locks and playing on stage ive never had the guitars come loose ever. so thanks for telling me i was rights for my career as a guitar player. you novice guitar players listen to Jim hes the man at gibson!! thanks Jim
I just did exactly this on my old Les Paul and was perfect!! Thanks!!!
Toothpick - glue - Schaller strap locks... they haven't failed me yet. Once at a gig I had a guitar with a loose strap pin (I hadn't put strap locks on it yet), but there where no toothpicks handy for a quick fix. But, I did notice that the table I was sitting at was made of wood. So I got out my Spyderco knife and whittled off a small piece of wood from the table and used it in place of a toothpick. On the road you got to be handy and let your inner MacGyver kick in.
ha hah ah ahahah aha a ahahahaaa used to do that all the time! Was just talking about that the other day… a bit of the table, a bit of the stage, whatever it takes…
Cheers Jim & Gibson. Good bush fix.
Such a great video !
thanks for the help! i just repaired the loose strap button on my '08 les paul studio
This guy is just amazing!
Super helpful thanks man!
Glad it helped!
The perfect color LP!!!
Thank you for these videos. Did this toothpick and wood glue fix on my strat tonight. Hoping I struck the right balance of enough wood, glue, and screw tightness (without overdoing any of them)
A 3/8" hollow steel leather punch cuts perfect holes for Schaller style locks. I have a General No.1280 I got from Amazon. Mojo Axe has Schaller style locks that fit the two different size Gibson screws without having to grind the screw heads down to get them to go in the button barrel.
Awesome! Thanks.
Very informative! Cheers
I've even run out of toothpicks and used 2-part epoxy lightly on the screw thread. If you time it right you can unscrew the pin before the metal bonds to it (but the epoxy is hard enough to stay in place) and create a new thread that lasts decades.
Jim ! I met you in Midtown Miami.
Super cool dude! awesome hang .
I've been using toothpicks for this purpose for years. But I snip off the pointed ends. You should re-edit the guitar strap portion of both brands. You need to show more of the zoomed in footage for novices to clearly visualize the process. A stripped tuner screw extraction video would be nice!!
Last time I had that issue it was in my smoking days, I used Briant and May matches.
🤯. Wish I had this video a few months back. Not how I ended up fixing my strap button. At least I know now for the future if it ever pops out again!
I take an eyedropper and fill the strap button screw hole with water and let it sit in there until it is absorbed. Then, after it is absorbed, I put more water in the hole and let that be absorbed. The water in the hole swells the wood and grips the screw much tighter. I let it completely dry and then put some white all purpose glue on the screw and screw it back in. Works great if the stages of looseness are early. This works well for loose pickguard and rear control cavity cover screws.
Matchsticks work just fine too. Been doing that as long as I can remember.
Another method is breaking the head off of a wooden match and using the stick. Works great.
Using multiple flat toothpicks also works very well
In my experience, the straplock screws are normally larger in diameter and length than the existing screws. I always use a separate screws to enlarge the existing hole. Forcing the new larger screw often results in stripping the screw head
Gibson makes some great guitars.
Hi, love the tips and instruction so I thought who better to ask about my particular problem. I have an EDS1275, and no matter what I do I cannot fret chords on the 12 string neck without notes being hit by my fingers. Now I'm not Alex Lifeson, and I do not have huge hands with fingers like bananas, and I've played 12 strings before without issue. Any ideas? How big should the spacing be between string pairs? That seems to me like it could be the culprit. Any advice would be greatly appreciated.
The other day I was explaining to my daughter why my strap locks aren’t installed on my two new guitars. I don’t have toothpicks and wood glue in the house. I used to program and set up CNC machines working with metal and nylon. Working with wood my brain still wants .005 inch tolerance-machinists require too much perfection to work with wood!
Hi Jim, I was going to purchase strap locks years ago on my Les Paul's, but chose not to because the screw diameter was larger than the stock Gibson screw, which would require altering the guitar. Can you confirm please? Always wondered why the strap lock manufacturers didn't offer hardware that matched the original size/pitch. Thanks!
Well, I DID, but I was always ashamed of it 😂😂😂
Thanks for the video, Jim
Will this affect the guitar tone?
On the strap pins, is one pin supposed to be longer than the other? My 1950's Gibson Les Paul Standard has one smaller than the other? I removed them b/c I didn't want to over stretch my expensive leather strap, but I didn't pay attention when I was removing them to notice that one was longer than the other, until I went to re-install them both. That's when I saw that they were both of different lengths. So I put the longest screw into the bottom strap pin & the shorter length wood screw. I put into the top one, but I've been wondering if I did it correctly? Also why wouldn't they both be the same length? Also there was no washer & there was no felt on my strap pins? My Fender has really nice felt washers but my $3,000 1950's Gibson Les Paul Standard has none?
즐거운 주말 잘 보내세요 👍🤗😊😄😁💕
Is this a 50s standard les paul? And what finish is this? Could I get the same finish on a 60s les paul?
I had to fix the strap button on my new Gibson in 2018
Strap locks are very nice. The way you have the headstock just down like that makes me nervous. The moment it slips. Bad day..
Genial
This makes me feel a lot better about my collection of guitars filled with toothpicks...
@Gibson TV why Gibson stop there work from india 😭😭 we miss you
( Love from ❤️❤️) hope you will come back 🥺🥺🥺
My dad is a carpenter.. he showed this to me 50 years ago
Over a grand for a guitar with a plastic jack plate. Meanwhile the sub $200. Les Paul style Grote has a metal jack.
Maybe a closer view to show the explanation will be a good idea next time. Thanks.
I just bought a $3000 J-45 and it came with a strap button that was not even installed on the guitar. Really annoying that it's not preinstalled. Why don't they install these when they make them?
Mr DeCola mentions two types of strap lock. Didn't catch the names. It would also be nice to see close-ups of both types.
Jim Dunlop and Schaller strap locks. Cheers!
Schaller: www.amazon.com/Schaller-Locks-Guitar-Buttons-Nickel/dp/B07F7F2SQJ/
Dunlop: www.amazon.com/Dunlop-SLS1503BK-Straplok-Traditional-Retainer/dp/B000EEL920/
When. How to straighten the guitar NECK ?
Most of my guitars have the toothpick mod
Can you hurry up and send my LP Modern
There's obviously a camera that can do close-ups, yet, whenever it's needed, it's not used!
Funny this video came up today. I literally received my brand new Gibson acoustic with no strap button on the heel. All the photos I've seen showed a strap button. So I put one off of a made in Mexico fender Stratocaster on it
sometimes this allows you to install it in the rear of the heel or the side, I actually like when the top one it's not factory installed
I can't believe Slash still uses those Shaller locks. Those things suck. I took the Pepsi challenge and went with the Dunlop. Out of 17 instruments in service I've never had a Dunlop fail. The "E clip" he's talking about is called a Jesus clip.
Elmers glue lmao
Elmer's IS "Hyde glue" They also make a brown version. ( "Elmer" is a Cow ) hmmm... Cowhide & Horsehide.... Hide glue. What the 50's Originals were glued with. The wood pores "Drink it in" when building a guitar. Yeah, "Laugh your ass off" NO Offense.. you didn't know.
@@soundpainter2590 Ill stick to aliphatic resin based, tyvm.
De la colle et des cure-dents dans une guitare à 6000 dollars 💵
A ce prix Gibson peut faire installer des strap lock d’origine
I used toothpick before some one showed me.
Do be the toothpicick a thin g a thousand times
Now I know how to be rich!
Toothpicks - 1$ / package
Gibson Dual taper-ended luthier dowel rods - 1000$ / unit
One of the strap buttons on my BRAND NEW Les Paul pulled right out of the guitar just by removing the strap. Dear Gibson, please drill smaller pilot holes. There was literally no wood for the screw to grab on to.
Good information, but not great editing. You need more tight shots of the process.
🤣 Never had these problems with my PRS guitars!!!
I did
This could happen with any guitar. The first result I got when searching for the fix to this issue was a guy fixing his prs guitar.
Metal strap locks are the next ding on your guitar. It must be in the Bible someplace.
Toothpicks!! How dare you!
You heathen!! At least have the decency to use match sticks like the rest of us.. lol
Terrible, unreliable fix, especially for heavy and expensive guitars like LPs. Every time I buy a used guitar, the buttons are loose and toothpicks fall apart. I have to drill a larger hole, glue a hardwood dowel, and redrill for the original strap button screw size. Another option is to use longer, neck mounting screws, but they might not work if you need to keep the existing strap button unmodified.
wow thanks Gibson 🙄i never would have known how to do any of these things if you hadn’t made a video of it,give me a break 🙄 changing strap buttons and stuff like that is for beginners make a video showing how to do real modifications not kids stuff