How to Change the Air Intake Filters on an Iwata Power Jet Lite and Power Jet Pro
Vložit
- čas přidán 5. 09. 2016
- Maintain your Iwata compressor by periodically changing the air intake filters. This will keep your compressor in peak performance and lengthen its lifespan.
These filters are available in 10 packs (part number IS012) from Coast Airbrush (www.coastairbrush.com/proddet...) and other Iwata Airbrush retailers.
Thanks for the video!
You guys should make a video on daily maintenance on this compressor. I love mine had for 2 years now need help or tips on cleaning other areas of it.
Could you tell me the size of the screws on the side as mine have dusted and I need to replace them
How to replace the gauge if it’s clogged?
How often should you clean the air filters?
How often you change the filters depends on how well the the environment is ventilated, the proximity of the compressor to the spray surface, the type of material that you spray and how often you airbrush. A rough guide is to check it every few months. Newer models have an access hole for easier access to the filter. For older models, follow the guide as seen in the video. Find replacement filters at Iwata Retailers. For a list of retailers: www.iwata-airbrush.com/find-a-store.html
where can i buy those filters
dude... this was a HUNT and a half but I stumbled upon this when I was trying to find the adapter i needed (also a hunt omg) they really need to be more helpful with this stuff. any way heres the air filters www.coastairbrush.com/proddetail.asp?prod=10pk_Studios_Series_Air_Intake_Filters
Дак там можно дотянуться рукой не снимая защитный кожух :D
You actually don't need to take the lid off to replace the intake filters. You can pop off the filters by prying them off from the side with a screw driver. They are on there tight! Also, the screws on the lid are cheaply made and strip easily so be warned!
yah and iwata conveniently fails to tell you where you can get new filters. gotta love it !