Best Techniques For Spraying Any Clear Coat And Get PRO RESULTS

SdĂ­let
VloĆŸit
  • čas pƙidĂĄn 3. 03. 2023
  • Subscribe to my channel- / chucho1216
    Music From This Video from - đŸŽ¶www.epidemicsound.com/referra...
    Contact Information-J.Lulo_1@yahoo.com
    Spray Gun I Use-Sata 4000 B HVLP 1.3 Tip
    This is an affiliates link and I make a small commission from anything purchased through these links.
    CLEAR COAT I USE NASON AXALTA-amzn.to/3YmBavr
    PLASTIC CAR COVER ABN Clear Plastic Sheeting-amzn.to/3KQm8Ln
    LE LEMATEC PREASSURE REGULATOR-amzn.to/3kGjfCj
    AIR HOSE I USE-amzn.to/3KVnS68
  • Jak na to + styl

Komentáƙe • 48

  • @user-gm4pe6ie5y
    @user-gm4pe6ie5y Pƙed rokem +2

    Man I've been watching paint and clear videos. But your the best I've ever seen on explaining how to do all your stuff I thank you so much from southern Indiana.

    • @J.Lulo_
      @J.Lulo_  Pƙed rokem

      Wow man that’s such a great compliment thank you 🙏 so much that means a lot to me. I’m glad that your enjoying my videos and hope that you learn a lot from them. Take care and good luck with your projects. And thanks again for the kind words I appreciate it.

  • @autowingsthingsmike8954
    @autowingsthingsmike8954 Pƙed rokem +3

    Great Advice and Explanation!

    • @J.Lulo_
      @J.Lulo_  Pƙed rokem

      Thanks 🙏 for the kind words I appreciate it.

  • @kevinbryniarski6567
    @kevinbryniarski6567 Pƙed rokem +2

    I love watching and learning from you all your ways of painting and techniques

    • @J.Lulo_
      @J.Lulo_  Pƙed rokem

      Thanks 🙏 for the kind words I appreciate it.

  • @matnohmatnoh6929
    @matnohmatnoh6929 Pƙed měsĂ­cem +2

    J tq for ur advice ....u gud painter

    • @J.Lulo_
      @J.Lulo_  Pƙed měsĂ­cem

      Thank you 🙏 for the kind words I appreciate it.

  • @DaSesh
    @DaSesh Pƙed rokem +3

    mane i found you by mistake glad i did :)

    • @J.Lulo_
      @J.Lulo_  Pƙed měsĂ­cem +1

      Iam glad you found me too. I appreciate the fact that you’re excited about finding my channel. Help share my channel with other you think might benefit from my videos. Thank for watching I appreciate you.

  • @vicshonebethel9934
    @vicshonebethel9934 Pƙed rokem +1

    Wow that clear coat looks beautiful. Amazing technique 👌

    • @J.Lulo_
      @J.Lulo_  Pƙed rokem +1

      Thank you 🙏 for the kind words I appreciate it.

  • @MarcBchannel
    @MarcBchannel Pƙed 2 měsĂ­ci +1

    Bro! I'm gonna try this. Way less overspray. I spray at home .Thx for the tips

    • @J.Lulo_
      @J.Lulo_  Pƙed 2 měsĂ­ci

      Thank you 🙏 for the kind words I appreciate it.

  • @davidharrison8397
    @davidharrison8397 Pƙed rokem +1

    This is great advice on applying clear.....your content is top notch !!

    • @J.Lulo_
      @J.Lulo_  Pƙed rokem +1

      Thank you 🙏 for the kind words I appreciate it.

  • @Grant7
    @Grant7 Pƙed rokem +1

    Good info.... keep up the good work

    • @J.Lulo_
      @J.Lulo_  Pƙed rokem

      Thank you 🙏 for the kind words I appreciate it.

  • @arvindldayal5086
    @arvindldayal5086 Pƙed rokem +1

    Thanks for all the great tips ...i have started on my old Landcruiser (98 fzj105r),hope to do a reasonably good paint job.Cheers !

    • @J.Lulo_
      @J.Lulo_  Pƙed rokem

      Thanks 🙏 for the kind words I appreciate it. And good luck 👍 with your paint job I hope my videos help guide you to a beautiful paint job. GOOD 👍 LUCK.

  • @Ebv66
    @Ebv66 Pƙed rokem +1

    That's what I do the same thing good advice for people

    • @J.Lulo_
      @J.Lulo_  Pƙed rokem +1

      Thanks 🙏 for the kind words I appreciate it.

  • @giuseppefiglioli5167
    @giuseppefiglioli5167 Pƙed rokem +1

    Ciao seguo spesso i tuoi video emi piacciono molto ti posso chiedere di esprimerti in bar al posto di psi per capire meglio la tua tecnica buon lavoro e buona PASQUA

    • @J.Lulo_
      @J.Lulo_  Pƙed rokem

      Thank you. Grazie mille

  • @haydenattew2414
    @haydenattew2414 Pƙed rokem +1

    Top work again mate I’m a young painter still struggling with the clear stage I get some great jobs then others just run đŸ€·â€â™‚ïž

    • @J.Lulo_
      @J.Lulo_  Pƙed rokem +3

      Thanks 🙏 for the kind words I appreciate it. And don’t worry about the runs just make some adjustments and with time and practice you’ll be great 👍.

    • @chadwickwicky67
      @chadwickwicky67 Pƙed rokem +1

      As you gain experience you will develop knowing what to do and how to do it, equipment, adjustments, material, temp, humidity etc etc. at first stick with the same quality equip. and materials while learning, that will help pinpoint all the little things involved with chemicals and painting. Even long time pros run into issues sometimes because chemicals can be complicated however as you develop knowing how to handle things you’ll gain confidence and results. Always have an open mind, the best are always striving to learn.

    • @J.Lulo_
      @J.Lulo_  Pƙed rokem

      I agree with you 💯 percent. That’s a very good way to look at things. Thank you 🙏 for commenting.

  • @pixelbath2131
    @pixelbath2131 Pƙed rokem +1

    Beast man. I'm doing my first one soon I've heard you should go lighter first pass? I'm just doing a touch up paint & 2k aerosol roof respray half outside 70 degrees etc..

    • @J.Lulo_
      @J.Lulo_  Pƙed rokem +1

      Okay 👍 sounds good 👍 good luck 👍 and let me know how it goes.

    • @pixelbath2131
      @pixelbath2131 Pƙed rokem

      @J.Lulo_ Thanks bro! The only thing I'm not sure of is, do you think I should primer over the areas where the clear has peeled? I was hoping to save on cans and just scuff it all real good and just base and clear it. The roof is smooth no body work just some spots with exposed base and primer from levelling out the peeled sections.

    • @J.Lulo_
      @J.Lulo_  Pƙed rokem

      Yeah I would primer the area before you paint. It will give it a good protective barrier to make sure your paint sticks good and some of the old paint underneath doesn’t come through the new paint. Primer it give it a lite sanding and then apply your paint and clear coat.

  • @bensonporter1384
    @bensonporter1384 Pƙed rokem +1

    How long do u wait ...before applying the 3rd clearcoat on the hood???

    • @J.Lulo_
      @J.Lulo_  Pƙed rokem

      I apply the third coat of clear right after the second coat.

  • @3rekoatskustoms929
    @3rekoatskustoms929 Pƙed rokem

    Great tips. Will this technique work on bumpers, I have a pair I'll be spraying next week?

    • @J.Lulo_
      @J.Lulo_  Pƙed rokem +1

      Yes this technique will work on a bumper. Just be careful when spraying bumpers because bumpers have a lot of curvy areas that can be hard to reach.

  • @oratiobarrett1241
    @oratiobarrett1241 Pƙed rokem

    Does the application of the first coat works the same for silver metalics colour?

    • @J.Lulo_
      @J.Lulo_  Pƙed rokem

      Yes I use this technique for everything I spray.

  • @Jason-zr6il
    @Jason-zr6il Pƙed rokem

    I see you use the push-pull method. I’m comfortable doing the pull-pull but would that cause excessive overspray or streaking?

    • @J.Lulo_
      @J.Lulo_  Pƙed rokem

      Can you clarify what you mean with the push pull method.

    • @Jason-zr6il
      @Jason-zr6il Pƙed rokem

      @@J.Lulo_ You started on one side of the hood by spraying forward then you go to the other side to continue by pulling the gun towards you

    • @J.Lulo_
      @J.Lulo_  Pƙed rokem +1

      Ok yes in some occasions it my cause excessive over spray depending on the panels you’re painting. I like to start from one end of a panel and work my way across. I feel this way it comes out smoother and cleaner.

  • @autowingsthingsmike8954
    @autowingsthingsmike8954 Pƙed rokem +1

    What speed activator are you using in your clear & how long you waiting between coats ?

    • @J.Lulo_
      @J.Lulo_  Pƙed rokem

      I usually use a slow activator in my clear and just go back to back with my coats because I have to get it done quickly. The reason I do it like that is because when you start at one point of the car and finish coating everything else the first panel you started with would have flashed enough to apply the second coat of clear. Plus I spray in a climate controlled paint booth which helps to flash the paint as well.

    • @autowingsthingsmike8954
      @autowingsthingsmike8954 Pƙed rokem

      @@J.Lulo_ Approximately, what temp is your climate control at ??

    • @J.Lulo_
      @J.Lulo_  Pƙed rokem +2

      Usually it’s at 70 to 75 degrees if the weather in my area is cold.

    • @autowingsthingsmike8954
      @autowingsthingsmike8954 Pƙed rokem +1

      @J.Lulo_ Thank you for you fast response!! I really appreciate the help!!

    • @J.Lulo_
      @J.Lulo_  Pƙed rokem

      Your very welcome 🙏.