Fitting Rear Alpine Speakers Amp & Kicker L5 Subwoofer to A Peugeot 107(Toyota AYGO Citroen C1)
Vložit
- čas přidán 28. 08. 2024
- This video shows how to retrofit rear speakers and a amplifier subwoofer speaker box to a Peugeot 107 , Toyota AYGO or citron c1 using the original stereo which is made by Panasonic,
I show all the wiring to the radio and explain which wire goes where, of and the routing of all the cables and how to fit the sub speaker.
I have another video following this one which goes into the making of the sub box and the internals of the speaker wires.
This is the link to the next video building the sub box.
Custom Subwoofer build Peugeot 107, Bass Box L5 Kicker Alpine Amp, (Toyota AYGO Citroen C1) • Custom Subwoofer build...
Link to Amazon shop for tools and Wire, www.amazon.co....
10m roll wire, £7 amzn.to/2PkxREw
30m roll wire, £18 amzn.to/2SX8smw
Link to Beautiful 5.5" Alpine speakers £39 amzn.to/3dJV2lo
Link to Kicker sub box, ready to go £140 amzn.to/2Ta9Jq1
Radio connector plugs £3 amzn.to/3tD6mrr
Link to Alpine D class Amplifier amzn.to/3uAfhKr
#citybug #peugeot107 #toyotaaygo #citroenc1
aaanton11 this is fantastic. I am always amazed at guys like you who just share their hard earned experience for free for the benefit of others. Thanks mate!
Thanks for the great comments 👍🏻👍🏻
Can't tell you how helpful this was! Just saved a nice amount in fitting costs :) Big thanks
Glad it helped! Thanks for the great comments👍🏻👍🏻🛠
great video! And thanks for the tip about the wires! Keep the videos coming, hes lucky to have a dad like you
I appreciate that! Thanks for the great comments👍🏻👍🏻🛠
The standard radio got a few tricks up it sleeve, gd job u done,
Yes it is a great Panasonic radio, and I love the stealth look, and it can be made to really pack a punch 🥊, thanks for your comments 👍🏻👍🏻
Yeh man, superb vid thanks! Tons of dead helpful stuff in there. Having done the easy bits (new HU, dash and door speakers) I'm now looking at adding rear speakers and a sub, this is invaluable.
Thanks for the great comments👍🏻👍🏻🛠
I’ve got a Toyota Argo and I upgraded my rear speakers to 6x9 inch speakers in the rear and I upgraded the front speakers as well, both are pioneers, I’ve got a Sony High power head unit and it already sounds awesome. I’ve just bought a Sony xplod 1000w 12 inch subwoofer and an edge amp and getting ready to install it this weekend, I can’t wait
That should work a treat thanks for the great comments 👍🏻👍🏻🐿
I’ve just put the same system as you devilshot19 and it sounds awesome 👍👍
@@elliotturner9505 videos of my system are on my channel 👍🏻 you can see the old ones I talked about in my Toyota aygo and how I progressed to a corsa bass car
very clear and straightforward, especially the tip about using domestic twin cable as speaker cable, i been using it for 30 years now and there are so many mugs out there spending hundreds on huge "oxygen free, made from pure kryptonite" bullshit speaker cable and it makes no difference at all. As long as its fairly chunky you'll be fine and domestic flexi cable is ideal
Thanks Andrew for the great information👍🏻👍🏻🛠
Don't use solid core wire for vehicles though, it internally snaps under vibration since that causes stress in the copper.
Brilliant video gives me confidence to have a go myself thankyou for all the hard work filming it all 👍👍
You can do it! Thanks for the great comments👍🏻👍🏻🛠
Nice one Aanton! Thanks for the video tutorial! This may be a help tomorrow when I'm fitting my underseat subwoofer and another pair of speakers at the back.
Sounds great! Thanks for the great comments👍🏻👍🏻🛠
Great video! Must've been quite tedious with all the camera angles. Might try to convince my sisters to let me do this to our shared car, they'll probably love that idea!
Go for it, Thanks for the great comments👍🏻👍🏻🛠
Awesome really instructive video, ATM upgrading my own peugeot 107 with rear speakers and 'some bass in the booth' :D Thanks alot!
Thanks for the great comments👍🏻👍🏻🛠
Just saw it.
Nice job!
Thanks for the great comments👍🏻👍🏻🛠
excellent video. well worded, clear and concise.
Thanks for the great comments👍🏻👍🏻🛠
Great video, so much detail.
Thanks for the great comments 👍🏻👍🏻
Brilliant stuff, thanks for the top tip about using house wire 👍.
Any chance you can sort a "fix" for the flashing airbag light and post a vid if you do?
Keep posting the variety of vids, really good and a lot have helped me out.
Thanks for watching mike, the airbag on these is usually down to the wires under the driver seat they have issues caused by moving the seat backwards and forward, 👍🏻👍🏻
aaanton11 nice one, I'll have a root around under the seat, thanks for replying and keep the vids coming, really enjoy them. By the way, was that mower noise coming from your Honda, being used by your lad as payment for sorting his new sound system? 😉 The oil change on the Honda lawn mower was another vid I enjoyed as it helped me with my mower 👍 Thanks again, much appreciated.
Great video! please keep posting more, thanks my friend!
definatly Thanks for the great comments👍🏻👍🏻🛠
I enjoyed watching that mate. Great video, informative and helpful for many people I bet. Please don’t think I’m trolling but if I did anything different it would be to use bigger wiring for the power. The earthing cable should be the same gauge as the power also. I’m going to have a look through your other vids now as we have a little 107 also. I’ve not played with cars for years but you’ve reignited my interest in audio again. Thanks
Dig out the old stereo parts from the loft, we all have a box of bits, surprising what you can put together, I did enjoy this little project 👍🏻👍🏻
aaanton11 I used to fit audio / multimedia many years ago for ripspeed / Halfords. Unfortunately my parts bin is empty. One day
Gonna do this, I noticed the wires to the front speakers are so thin, so will probably replace then with the cable you recommend, thanks!
The front speaker wires are fine, especially if you are fitting a rear sub, because you turn the bass right down on the stereo the small speakers are only midrange and treble, low power waves👍🏻👍🏻Thanks for the comments 👍🏻
Your the best, Im going to install mine as well, I changed the dash speakers but the sound is not good, so I was thinking of installing an amp on my aygo , will the sound improve, I didn’t see you connect a negative on the battery can you please enlighten me.
The body of the car is connected to the negative, so the - of the amp can be attached to a seat bolt or a clean bit of metal behind the dash, Thanks for the great comments👍🏻👍🏻🛠
Anybody else"Winced' when the end was lopped off the end of the rubber grommet?
Reminder me of "My Operation ".. 🤣🤣
😂Thanks for the great comments👍🏻👍🏻🛠
Just came here for some inspiration on where to run the wires. lol. I have Sony Head unit with two 55W dash speakers and just ordered an active 1800W active sub for the boot. Which wasn;t easy finding one to fit in the tiny space. lol. Looking at the car today I noticed there was no where to run wires down the sills, as I've done on every amp installation. The carpet seems to be glued down under some rubber trim that is also glued? Anyway, I think I'll do as you did. Through the centre, under the carpet and through the rear panels. I like your idea of the rear speakers in the trim. I never thought of that. I was just going to mount mine on the parcel shelf. But I might re-think that :)
Definitely better fitting rear speakers in the trim, your ears will be bursting with all that bass , thanks for the great comments 👍🏻👍🏻🛠🛠
Yo, thanks for the great video! Would you mind listing all the stuff you need to do it please? I’ve just brought my first car so I don’t have a clue haha
In the description, Thanks for the great comments👍🏻👍🏻🛠
aaanton11 ah nice one, didn’t even think to look there lol! Thanks
Hey aaanton11, its really cool that you are sharing your knowledge thank you for this! I just wanted to ask if you could add a list of all things someone would need to do this, like cables and tools etc. would be very nice, thanks in advance!
I will look into it, Thanks for the great comments 👍🏻👍🏻🛠
@@aaanton11 Hey there again :) I wanted to build in rear speakers which have a depth of 60.2 mm, do you think they would fit in the walls? Thanks in advance!
Great video 👍. My son's just bought the Citroen version of this so no doubt I'll soon be doing something similar soon. What was the model and power output of the Amp. Many thanks
This is a link to the newer model Amp amzn.to/3uAfhKr They are unbelievable Thanks for the great comments👍🏻👍🏻🛠
Great video. I’m about to do something similar in my Peugeot 107. With the speakers, do these stay wired to the Stereo? Or should the Speakers by wired to the Amplifier? Which is best. Many thanks.
use front and rear outputs on the stereo, and an wire in an amp if you need to power a sub, Thanks for the great comments👍🏻👍🏻🛠
gotta figure out if I have the same hole for passing cables in my LHD 107
It will be there, Thanks for the great comments👍🏻👍🏻🛠
Thank you so much
Thanks for the great comments👍🏻👍🏻🛠
Hi very nice videos you made always I have a question about this video I need to put in my car that is same like your car I want to put subwoofer with amplifier fixed in one box together so there I have power cable earth cable and out and in put cable so how I can just connect to back side radio connection thanks
Like in the video, I show radio and sub connections, Thanks for the great comments👍🏻👍🏻🛠
ок хорошая робота
Thanks for the great comments👍🏻👍🏻🛠
If I get one of these cars, fancy doing this to my car lol?
Thanks for the great comments Martin, I am all booked up sorry 👍🏻👍🏻
We have a Blaupunkt Stockholm 100 radio in our citroen c1, the aux on the suddenly stopped working, any ideas as to what might fix the issue?
usually its the jack plug, Thanks for the great comments👍🏻👍🏻🛠
I am planning on upgrading the standard stereo in my son's C1 by changing the dash speakers and installing a little under seat active subwoofer, so I have found this video very useful. Thank you. However, I was hoping that you could clarify one thing for me. Which pin on the ISO A connector did you use for the remote switch on wire? You said the white wire, but we don't appear to have a white one. Did you simply use pin 4, which I believe is the ignition switched live? I would prefer to only power it up with the stereo, so was thinking that I could use the electric aerial live feed (pin 5 I believe). But... (1) Does the standard stereo actually provide a live feed through this pin? (2) If so, is this live regardless of selected source, or only when the radio tuner is the selected source?
I used the ignition live, I like this as it stops the amplifier being powered up if the engine is off causing a battery drain, the radio can still be used at a low power drain in auxiliary position on the ignition switch, personnel preference only 👍🏻thanks for the great comments 👍🏻🚗
@@aaanton11 Thanks for the quick reply. I figured it'd be the ignition live, so would I be right in saying that this is pin A4 (I believe the two lives are swapped round vs ISO default)?
I had hoped to take it a step further such that for the amp to power up both the ignition AND the stereo itself would need to be switched on. So with engine running, switching off the stereo would also switch off the amp. So do you know if the electric aerial pin on the standard stereo would work as desired for this?
The electric aerial pin is fed from the radio, so could be used to power up the amplifier, but won’t be any good at feeding the radio itself 👍🏻👍🏻
@@aaanton11 I fitted these bits last week and can confirm that the standard stereo does NOT deliver power over the power antenna pin, meaning that this could not be used as a remote switch for the powered sub. :( I had to instead go for the ignition switched live. It all works, but just means that the amp will be powered up when the ignition is on regardless of whether the stereo is switched on or not.
Hi there. Great video. Is there enough space to fit a 16.5cm speaker in the rear panel rather than the 10cm one you used?
Yes, absolutely, Thanks for the great comments👍🏻👍🏻🛠
How many hours do you think this would take a professional?
Can you have the amp and speakers only, without the sub?
The amp powers the sub, the rear speakers are just powered by the stereo so yes no amp needed if no sub needed, a garage would charge around £200 to fit the rear speakers, Thanks for the great comments👍🏻👍🏻🛠
Thnx! Good job!
Thanks for the great comments 👍🏻👍🏻
Why not have passed a cable (at least 10mm2) to connect the amplifier to the positive terminal of the battery?
No need this works great, Thanks for the great comments👍🏻👍🏻🛠
amazing
Glad you think so! Thanks for the great comments👍🏻👍🏻🛠
Top job mate
Thanks for the great comments Freddie 👍🏻👍🏻
hi mate. can you tell me where you got the adapter you plugged in to the back of the head unit to connect all the speakers and amp? cheers. great video btw
These look like the ones amzn.to/3tD6mrr Thanks for the great comments👍🏻👍🏻🛠
Don’t suppose you fancy helping me mod my 107😁😁
What is you first mod, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 learning to drive would be a good start
Honestly there are so many things I want to do to this car I don’t know where to start
for small car...you need big audio system!
😂 Thanks for the great comments👍🏻👍🏻🛠
Hi, nice jobs ! thanks so much for your video. I'm french and I don't understand all what you say so I have a question :P. Your alpine amplifier feeds the two speakers in the back of the car and the subwoofer and the two front speakers are feeded by the car stereo amplifier ?
No, the amplifier uses the rear speaker feeds as a input signal, to amplify and power the rear subwoofer, so the radio feeds front and rear speakers. Hope that helps, thanks for the great comments 👍🏻👍🏻🛠
@@aaanton11 ok, thanks for your help!
Next WE, I plan to install:
- JVC CS-J420X 10cm front speaker feeded by the radio
- Focal 165 AC on the
quarter-deck powered by a Sony XM-N502 two chan
- and a Focal IBUS 20 under the seat
I hope it will be satisfying :P
I 've just discovered your video about this car and I think it will help me a lot about engine misfire and water inflitration :D
Fantastic I would love to see some pictures of the installation 👍🏻👍🏻🛠
@@aaanton11 yeay, I will show you
My toyota aygo has speakers in the door, i wonder what inch they are. 2009
not sure, Thanks for the great comments👍🏻👍🏻🛠
I wanted to change what I thought was a failed bulb for one of the indicators but when I got inside it I saw it was an LED! 😳 has anyone changed an led or does anyone know if a new speedo would be just plug and play?
It is more likely to be the connector plug, Thanks for the great comments👍🏻👍🏻🛠
Your good at doing how to but then wires are to thin especially for power and ground, I'd recommend getting a proper wiring kit for £20 especially for 700w peak bit of a fire hazard
The clue is in the fuse rating, as long as the wire can handle the amps that the fuse is rated to its never going to overheat. this amp is carrying a 30amp fuse if I remember right and this wire is more than ample to that, these massive wires you can buy are totally overrated, some like welding wires, we are a million miles away from that. Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 I'm shocked it's such a low fuse for that much power and the voltage drop over the length of the positive and negative wire i would of attached the negative under the seat with a better connection and to reduce alternator interference and a 4awg wire from battery with 60amp glass fuse
Hey thanks for the video, I’m too scared to do it by myself I was wondering how much you would charge to do it on my car?
Sorry I don't have the time, but Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 alright, cheers for the vid mate top video 👍🏼
Hi mate. Where did you get the speaker covers for the rear speakers? And what size are they? Am i right in thinking the rear speakers were 5" aswell? Going to upgrade the speakers in the car as the standard ones are shocking. Cheers
these little beauties are a steal at £39 amzn.to/3dJV2lo they come with covers ready to go, perfect size, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 thanks for the reply. Any recommendations on replacement dash speakers?
can running the speaker and power cables together not cause interference?
not usually, Thanks for the great comments👍🏻👍🏻🛠
No one does anything to these types of cars, I have a little Toyota aygo with a full blown system, new high power head unit, upgraded front speakers to pioneer, upgraded rear speakers to 6 x 9 inches pioneers, and two 12” inch kicker impulse subs in the back, thinking of making a video on it soon
You should, I would love to see it👍🏻👍🏻🛠
aaanton11 atm it’s got a Sony xplod 1000w 12 inch sub, but I’m going to get the kickers tonight, I’ll probably do a video on both setups, you can expect a video on my current set up on my channel today
aaanton11 also that’s a really nice setup you have done there, really good quality setup 👍🏻 I was going to get a 15 inch kicker l7 square sub but the car would fall apart lol
aaanton11 the video is up!!
Hey, hello there. I want to upgrade the radio and speakers too. Here I have, by default, an Aygo with a total of 4 speakers (2 front + 2 rear) and 2 pillar tweeters. I'm not sure about the total number of audio-outputs that I should keep in mind when buying a new radio.
You will only want 4 Channels, and 5 preouts (if you want Added Amps) 5th being the sub out, most high end stereos have these, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 TY 4sharing and great vid btw, cheers from Portugal.
if I want to use the original head unit and the original iso plug, just connect the rear speaker wires, do you know which pin do I need? I keep buying the wrong ones and none of them fit.
yes all this info is in the video, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 I`m asking if you know the type of pin that goes in the original connenctor,?
You love those little cars don’t you haha
Great town bugs 🐛 thanks for the great comments 👍🏻👍🏻
Oh boy, cables....
Thanks for the great comments👍🏻👍🏻🛠
Hi great video man!, can i do the same but without Subwoofer and Amp, I just want to connect 2x HERTS ECX 165.5 210w 4ohm in the back of my parcel shelf of my citroen c1.
directly too my standard radio is this possible?
Yes you can!, just attach the wires to the connector plug as in the video, and the will work perfectly, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 One last question I don't have a ISO cable like you to connect in the rear of the radio. Is there any possible sollution to put the speaker cables from the rear next to the cables from the front (Sorry I dont know the terms of the connection that goes in) in de Radio?
Can I also do this in a 5dr aygo because I also wanted to change the front ones and my two rear doors have one aswell.
You can, it’s all the same wiring, thanks for comments 👍🏻👍🏻
@@aaanton11 Thanks for the reply, great video. Keep it up.
What were the speakers called that you used
I fitted alpine 5” in the rear, and a kicker sub, thanks for the great comments 👍🏻👍🏻
hi, i need some spare parts of aygo 2006 C1 can you please help me how can i get the req material ?
You could try eBay, thanks for the great comments 👍🏻👍🏻🛠
18:36 i dont have this howl in my peugeot 107 is there another opening?
There will be another blank in the bulk head, Thanks for the great comments👍🏻👍🏻🛠
Is it possible to do the same in 5 door models?
You can fit speakers in the 5 door models too, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 Any idea how to get the wiring done in the doors? For the 3 door its much easier
wow i thought u need a high to low converter
Not needed most amps have a built in crossover, Thanks for the great comments👍🏻👍🏻🛠
Can I just ask you to do it for my aygo? 😳
No harm in asking, Thanks for the great comments👍🏻👍🏻🛠
Where is that blue interior from?? I have a light blue c1 and really want this colour interior
The trim is a Peugeot 107 urban spec, thanks for the great comments 👍🏻👍🏻
Did the blue interior trim come on the car?
@@caiseysmith2134 yeah i have this in mine, factory
Joshua Woolford what?
What wire did you use and where can I buy it from?
here's a link to the wire, £7 amzn.to/2v5kiSx Thanks for the great comments👍🏻👍🏻🛠
cable is good for 13amps 240v!!!!!!!
😂Meaning it is more than adequate for this job, Thanks for the great comments👍🏻👍🏻🛠
subwoofer box and speaker position is so wrong mate
But anyway thank you for the video and explanation!))) I'm planning to put some extra 6.5" speakers in front doors, so wiring scheme is really helpful)
This kicks ass, Thanks for the great comments👍🏻👍🏻🛠
Man i am to scared to do all this..I have 2 left hands
Give it a bash you might surprise yourself 👍🏻👍🏻
i will.. So i have a stock toyota aygo so no automatic passenger windows. I want to build in 2 speakers 1 left 1 right. are the 16.5 cm´s good? And how much space do i have (depth)? And do you have a 600 W max RMS sub? and is it active or passive?
@@nexusgroupnxt pasive
What he not mentioned. Electric wire is better because its pure copper. Cheap electric wires are just copper plated crap.
And it works just fine 👍🏻 Thanks for the great comments👍🏻👍🏻🛠
Ever heard of heat shrink? 😂
😂 Thanks for the great comments👍🏻👍🏻🛠
@aaanton11
Any chance for some help mate? I've bought my speaker, it's powered and working. My plug looks different too yours, i.imgur.com/DFiOYEd.jpg.
But I gave it a go anyway. i.imgur.com/1Rbc99r.jpg
My bass speaker produces no sound at all.
(I have a Citroen c1 2014)
hi brew, what speaker are you using, the image didn't load, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 Hi aaanton, thanks for the reply. I'm using a Caliber BC112SA.
It appears my connection at the back of the stereo is different too yours. I have a 2014 C1 that uses a quadlock. I believe the speaker cables are the same colours and have connected them as you did in the video.
However, I have no sound.
sorry but this amateur job i bet is lot unwanted noises from vibrations and cable in engine bay is not secured like it should
This is a great system for some one on a low budget, Thanks for the great comments👍🏻👍🏻🛠